D-Link DIR-825 :: Can Run A Cable And Attach Antennas
Jan 12, 2013
My DIR-825 is not in an ideal spot so I am thinking of getting an extension cable for the antenna (probably for both), drilling a little hole in a wall and mounting the antenna in a more central location. It really is just on the other side of a wall, maybe 5 feet total for distance, but in an open area where the signal should reach more of the house.
Can I run a cable and attach the antennas five feet away from the device itself? Is there anything I should look for in an extension cable?
View 10 Replies
ADVERTISEMENT
Oct 18, 2011
I would like to attach 2 x 5ghz 19db panel antennas to my dir-825.
1. Now, can it destroy my dir-825(because of its strengh). I am living in a village, and would like to connect with a few neightbours (300-600meters distance).
2. And will 2,4ghz signal will be normal (WIll it appear at all with those antennas).
View 2 Replies
View Related
Dec 25, 2012
What does one attach a repeater to the router via a cable?
View 2 Replies
View Related
Nov 16, 2011
How can I attach an optional antenna to a Dir 615 router?
View 1 Replies
View Related
Oct 15, 2012
I just upgraded to BT infinity Fibre optic boradband... I now have a modem downstairs with a wi-fi router attached, however I don't have any space nearby to put my NAS... The modem and router have to be downstairs due to the cables. I want to connect my NAS to my iMAc which is upstairs, but also to my Macbook Air...
The iMac is upstairs and that is where my old router was, so I have my NAS up next to the iMac. I was thinking that maybe I could get a wi-fi extender with a built in ethernet port and connect the NAS to the extender... or maybe connect the NAS directly into the iMac...
View 4 Replies
View Related
Feb 12, 2012
I have three different network with different static IP's and I want to connect those routers with one switch. If any case any network gos down then another taking care automatically.
View 1 Replies
View Related
Nov 25, 2011
I'm on a network in an office where each person's computer has different specs, some PC, some Mac. We all share files off a common drive, either using it directly, or, copying it to our local machine to work on it then return it to the shared drive. I'm looking for a way to attach a notification to a file to let everyone know it has been "signed out" by someone, to avoid two people taking the same file at the same time.I looked at a simple program called Shediko Badges, which puts a badge over the icon, by right clickingon the file and choosing a badge from a menu, and undone just as easily, however, it can't be seen by everyone else on the network. This is the sort of thing I'm looking for, simple, cheap or free, that somehow marks a specific file without changing the name. It could be a colour change, an icon change... whatever, ideally with several options, for example where a different colour could be assigned to each person in the office, similar to the coloured labels on a Mac.
View 7 Replies
View Related
Mar 11, 2012
We have an ASR1002 with asr1000rp1-adventerprisek9.03.05.01.S.152-1.S1.bin software.I couldn't find any documentation on how to attach an L2 interface, in my case a subinterface with a single dot1q vlan, to a BDI interface.I'm able to create a bridge-domain interface but it's down down.The command bridge-domain on the subinterface url...
View 2 Replies
View Related
May 22, 2012
I am struggling since many weeks for an issue in my Wireless infrastructure.
I have an LAP (1242AG) in one B site that I would like to attach (in H-REAP mode) to the WLC of site A(5508 v6.0.199.4). The topology is as follows:
MPLS - Site A - MAN - Site B.
When Site A is fully connected, all is fine, my AP of site B can successfully join the WLC of site A.
However, when the WAN interface of the router of site A is disconnected, the AP cannot associate successfully to the WLC. For us, it does not make any sense during that time, the AP of site B can successfully ping the WLC of site A and the traceroutes show the exact same path.
I took some debug on the AP and the WLC while the AP's was trying to associate to the WLC (when the WAN link of Site A was disconnected) and also when the AP could successfuly join the WLC when the WAN link of site A was reconnected.
View 7 Replies
View Related
Oct 16, 2012
In my office we have wired network and DHCP is not configured. every one has to enter IP address manually.
I want to attach a wireless router so laptops connected with WIFI should be a part of same network.
View 4 Replies
View Related
May 25, 2011
My Internet has this problem that disconnects me every time I try and attach a file to an email.
View 5 Replies
View Related
May 9, 2011
Is it possible to use a USB to Ethernet adapter to attach a USB printer to the network?
View 3 Replies
View Related
Jan 11, 2012
are there any free services where you can remote upload a file (zip file 25MB) and have it sent to me via email as an attachment. not a link where i have to download the file.
View 1 Replies
View Related
Mar 22, 2011
tell me about this antenna
View 4 Replies
View Related
Nov 10, 2011
I've got two RT-N16's one is a bridge and the other is the AP.I don't need an omnidirectional antenna on the AP because it is literally in the highest, farthest corner of the structure and a quarter-sphere signal would be perfect... I'm looking for some antennas to replace the omnis on it. [URL]
View 1 Replies
View Related
Jul 2, 2012
My campground has a wi-fi antenna about 150 yards from my cabin. I wish to install a router with a higain antenna to access the internet from my cabin. If this is possible, could you tell me the type of equipment I'll need to purchase.
View 2 Replies
View Related
Sep 22, 2011
My desktop PC which has an Asus PCE-N13 Wireless Adapter with two stock SMA antennas receives a very poor signal due to the significant distance between my desktop and the router.In order to improve my signal strength, I thought about buying better 3rd party antennas and specifically external ones which I could place closer to the router that connect to the SMA connections on my wireless adapter via a wire. There's many of these antennas for sale I see, but I'm unsure which is best suited for my situation.
View 3 Replies
View Related
May 17, 2011
I have dsl and my buddy is about a mile through the fields with a couple tree lines, is there any way parabolic antennas will work for me ?
View 2 Replies
View Related
Sep 18, 2012
I need to use 14Dbi patch antennas (like AIR-ANT5114P-N I use to have on AP1522) on AP 1552E. Is it possible?
View 2 Replies
View Related
Jul 4, 2013
im looking to buy some long range antennas to boost my wifi signal, i currently have a TPlink WR2543ND, which does a decent job in my house but id like to get some signal just outside my house if possible. Would this be better suited for a long range antenna or a wireless access point?
View 4 Replies
View Related
Apr 1, 2012
My customer wants to buy AIR1242AG with 2.4 GHZ antennas which are not ceiling mounted. How many 2.4 GHz antennas I can have on the AIR1242AG?
Can I have a recommendation which antenna I should use which is not ceiling mounted?
View 1 Replies
View Related
Aug 20, 2010
Is it possible to use external antennas on AP541N set in WDS mode? I would only need to use 802.11g mode 54mbps.I believe that the antennas shipped with the access points are removable RP-SMA.
View 3 Replies
View Related
Jun 30, 2012
I am expanding coverage in a big outdoor area.Most of the area is covered with AP1552 with AIR-ANT2506 5,2 db antennas.At the border of the area i have some masts where i can place ap's.Would it make sense to use directional antenna's there? I have a big open area where it is not possible to place ap's.The only placement is a mast in the middle of the area.I have a AP1552 with 5,2 db antennas there.Can i get better coverage if i place 3 or 4 ap's with directional antennas ?Or should i try with a 12dBi AIR-ANT24120 ?
View 2 Replies
View Related
Dec 3, 2012
I am building a BOM for a customer and I need to present cheaper options than 3500 or 3600 APs. I thought of these two models but I don't know what models of antennas to pick.1602 is a 3X3 MIMO with 3 antenna connectors. How many 2.4 GHz and how many 5.8 GHz antennas should I pick for each radio?2602 is a 3X4 MIMO with 4 antenna connectors. In this case I suppose there are 2 connectors per radio.
View 9 Replies
View Related
Mar 6, 2013
I´m trying to test anntenas in a AIR-CAP3062E-A-K9 the problem is that when I´m below the AP the speed is weak, the AP es with a WLC, so I was wondering if do you know a command or a form to test the anntenas or the Radio.
View 7 Replies
View Related
Feb 25, 2013
I have an existing 1242AG AP in a remote location, I have full access to it. I have a new 1242AG that was ordered but the client forgot to order antennas for it. Is there a way I can find out the exact model of antennas that are connected to the in place AP at the remote location??
View 2 Replies
View Related
Mar 21, 2012
1. Can the C1200 antennas work on the 1262 ?
2. Can the 2.4Ghz antenna work on the 5Ghz ports on the 1262 ?
3. The 1262 has 6 antenna ports (3 2.4ghz and 3 5ghz), can the (3) 2.4 Ghz antenna be used only as i only have antennas for the C1200 Access point which are 2.4 Ghz.
View 1 Replies
View Related
Jun 19, 2012
I have a metal shop that needs wireless indoors and outdoors.
Will it work if I mount the 1262 inside with 4 indoor antennas mounted inside the building and 2 outdoor antennas mounted outside?
View 5 Replies
View Related
Jan 22, 2012
I am pretty clueless with anything beyond creating a simple home wireless network. But I work at a 10 room inn which is surrounded by a few properties that are also part of the inn. We need to adequately cover a diameter of about 400ft in all directions from the inn with wireless internet. Even at 400 ft the signal should be reliable and able to Skype and stream videos. The path from the Inn to each of the surrounding properties is clear. For those with experience setting up a wireless network with 400ft diameter, what equipment would you recommend?
Our network now consists of several WRT54G routers. The access points use the default antennas and we have a couple directional antennas to reach a couple of the nearby houses. We need the signal to reach another house or two now. Rather than installing more directional antennas, the owner of the inn wants to wants to just purchase new equipment for the Inn to easily reach all of the surrounding houses which house innkeepers or guests.
View 6 Replies
View Related
Feb 26, 2013
when I connect my DIR-655 to the Motorola SB6141 cable modem I notice that the link speed LED on the cable modem never glows blue indicating a gigabit connection, it only glows amber indicating a lower negotiated speed. I am using a Cat6 cable between the two devices and have also tried a Cat5e cable.
When I try and force the WAN port speed to 1000Mpbs in the router interface the cable modem link speed will not light at all with no connectivity. Only resetting to Auto WAN port speed restores functionality albeit at the lower negotiated speed setting.
I'm running the DIR-655 rev B1 at 2.03NA firmware level.
I did connect the modem directly to my PC that uses an Intel Gigabit ethernet card and still had the lower connection indication (Amber) so it seems that the modem might be faulty.
View 4 Replies
View Related
Sep 21, 2010
I have not done the firmware for the units yet but have had only 1 outage thus far (but I think it was a power issue over the weekend).What I have done, 3 weeks ago, is put external antenna's on the 2 units which are 15 feet apart at 15dBi.The output is 40hz and I changed the latency time settings on the main unit, leaving the secondary at factory.This seems to be working for me so far. Usually goes down over the weekend and have to reset Mondays,but not this week. I am afraid of running the firmware because then it may become unstable again.
View 6 Replies
View Related
Feb 14, 2013
I have a question about external antennas on an access point. I have to plan a wireles solution, that also includes coverage in the industrial freezers. The freezers are one part of the sotck rooms, so the general coverage will be done with 1602I access points.
Since there are quite a lot of freezers in one location, installing separate AP in every freezer will be very expensive. I wondered if there is a possibility to put one 1602 access point with external antennas outside the freezer and then extend the antennas with 2m cables inside different freezers (1602E has three external antennas, so one antenna to each freezer).
Would this installation even work?
The freezers are quite small rooms maybe 2-3m2 sow the coverage is not a problem. But does this installation support multiple clients per AP in different freezers doing stocktaking with handheld terminals?
View 4 Replies
View Related
Jul 16, 2012
We ordered 2 Cisco AIR-LAP1242AG-E-K9 Wireless Access Points with 4 AIR-ANT5135D-R antennas.We accidentally ordered the 5GHz antennas instead of the 2.4GHz antennas.Would it be possible to use the 5GHz antennas as 2.4GHz antennas?If so, are there any down sides to it?
View 15 Replies
View Related
