Internet Drops / Recent Switch Installed To Setup?
Jul 23, 2011
So I have a netgear wireless router that my computer uses to access internet, then i have ethernet cable running from that netgear into my room to a linksys befsr41 router that I disabled DHCP to use as a switch. I have the ethernet cable going into the 4th slot and my xbox going into the 1st. I got it working however...and before i say this let me tell you, before introducing the linksys as the switch everything was working fine, both wireless to my computer and wired into my xbox straight from the Netgear. Ok back to my issue, while watching netflix on my xbox every 10 minutes or so i will get disconnected from the network on both my computer [wireless to netgear] and xbox wired to netgear through linksys. I was wondering if this could maybe be some kind of IP Address issue.
View 13 Replies
ADVERTISEMENT
Sep 17, 2011
I lost the rack brackets for my switch in a recent move. Where can I get more?
View 1 Replies
View Related
Sep 20, 2011
I tried several approaches to enable my laptop to print from my PC Installed printer burt without success. The computers are connected via Wifi and both use Windows 7 operating systems.
View 2 Replies
View Related
Feb 27, 2013
I have asked this question in server fault but not getting good answer.Can Cisco switch detect mac address if driver is not installed?
View 7 Replies
View Related
Jan 22, 2011
I have Cisco Catalyst 2901 switch with Sup engine which have CatOS installed. I want to know that can I install Cisco IOS in this switch.
View 1 Replies
View Related
Nov 1, 2011
I want to download the iOS update to my Cisco 2800 Series Routers and Cisco Catalyst 2960 Series Switches and leave them there till im ready to install them. Is this possible?
View 1 Replies
View Related
Jan 20, 2013
Is there a command that can be used to view what type of SFP module that is installed in Catalyst 3750 switch?
View 6 Replies
View Related
Mar 26, 2013
I have recently noticed that in my WLC traps I keep finding lots of Mac addresses that have many hits on joining but it's the same MAC ADDRESS. Example Mac addresss'08:11:96:e4:1a:60,4Wed Mar 27 16:05:56 2013Client with MAC address 08:11:96:e4:1a:60 has joined profile corporate5Wed Mar 27 16:05:45 2013Client with MAC address 08:11:96:e4:1a:60 has joined profile corporate7Wed Mar 27 16:04:53 2013Client with MAC address 08:11:96:e4:1a:60 has joined profile corporate12Wed Mar 27 16:02:51 2013Client with MAC address 08:11:96:e4:1a:60 has joined profile corporate This has like 20 hits in the traps section and when I check my ISE this is also reflected on the authentication aspect. This is starting to occur with many different client laptops, why does it keep re-authenticatiing into the profile joined?Is there a Time to Live TTL setting I can set so it doesn't poll so often? The users aren't doing anything this is all occuring automcatically, I think it's the WLC 5508 controller not the ISE.
View 2 Replies
View Related
Dec 3, 2012
I have a 5508 wireless lan controller we have two SSID configured Profile Name : Corporate and Guest When I go look at the Most Recent Traps all I see is Client with Mac address blah has joined your corporate, this goes on for sometime. But I am unable to see any of the Guest logs joining the network, I have since then grabbed my laptop and connected to the guest log. I still dont see any logs in Most Recent Traps for the Guest SSID WLAN configuration, I then blocked my Mac address and tried to connect again, No logs. I need to also montior the guest network is there some special tick box I need to apply for this to work? Once the guest is connected I can view them in the clients list but it never shows them on MOST RECENT TRAPS but I want to see the guests account connecting or failing to connect as we currently have a rogue device annoying me.
View 3 Replies
View Related
Jun 21, 2011
Wireless reception became poor after recent Windows 7 updates.Can't find recent windows 7 64 bit driver for this card.
View 1 Replies
View Related
Jun 10, 2013
MY belkin router model no :F5D7234-4v1, recognizes only my laptop and my other devices such as mobile and tab are getting the signal and w-fi gets connected but the internet is not working. when contacted service provider he asked to upgrade the firmware. Is there any recent version firmware upgrade of the model. current version is F5D7234-4_UK_1.00.01.
View 1 Replies
View Related
Jun 9, 2013
what is the recent version Firmware update for Belking router model number : F5D7234-4v2
View 1 Replies
View Related
Apr 21, 2011
Where I can get the most recent install file for the ASDM-IDM Launcher software? I'm currenly running 1.5(41). Somebody mentioned they are at least up to 1.5(50), but he couldn't remember where the install file was. I checked Cisco's software download site, but nothing came up for the Launcher.
View 2 Replies
View Related
Jan 23, 2013
I have one of the network every where routers by Linksys, model NR041. I realize this is an older model but it has been good for me ever since I ought it and I am wanting to find a recent firmware upgrade for this. Is anyone aware of a newer firmware upgrade & if so, where can I find it?
View 1 Replies
View Related
Mar 10, 2011
I just installed ubuntu 10.10 and I'm unable to connect to the internet. I checked for device recognition and the output is DISABLED which apparently means that my network device may be turned off. How can I turn it on. Windows is no longer installed. By the way I'm an ubuntu newbie. Hence, I wiped my hard drive during installation.
View 1 Replies
View Related
Jul 4, 2011
I have a 48 port 2960 switch with 2 10/100 ports ( fa0/46-47) setup in an etherchannel with a 2950 48 port switch. I am getting total output drops on port fa0/47. [code]
View 2 Replies
View Related
Dec 12, 2012
My sd2008 switch keeps dropping the connection. If I replace the sd2008 with another switch it works without an issue. this switch has a limited lifetime warrenty. If true, can I return this switch for a replacement? The switch has firmware version 2.1 and the serial number is really hard to make out on the bottom of the unit. My sd2008 switch keeps dropping the connection. If I replace the sd2008 with another switch it works without an issue. Will this switch has a limited lifetime warrenty. If true, can I return this switch for a replacement? The switch has firmware version 2.1 and the serial number is really hard to make out on the bottom of the unit.
View 1 Replies
View Related
Dec 27, 2011
I just re-installed Windows XP Professional on my Dell XPS Gen 4. Everything works fine on it but the internet. I can open IE, but it just says "This page cannot be displayed" and on and on.Since I re-installed it I believe their are not many drivers on it, I don't really know, and I think that might be it but I am not sure. And I am not sure which drivers I need if it is missing drivers.
View 7 Replies
View Related
Oct 27, 2011
Same problem on Dell Inspiron 530. Thinking about inserting a new network card.
View 3 Replies
View Related
Sep 20, 2012
I Installed windows XP on my Alive 6100 computer, and now it wont detect my ethernet cable. I tried updating the drivers off the ECS website but nothing works. I cant go through ethernet or wireless, probably dont even have the drivers (I Installed the ones listed on the site).
View 2 Replies
View Related
Jun 25, 2012
I had some issues so installed Avast, ran a scan and everything went wrong from there, suddenly dropped internet, tried system restores which failed and automatically deleted the restore points. One of the main fixes (that i havnt managed to get to work) is ipconfig /release/renew, both come up with "an error occurred while releasing interface loopback pseudo-interface : the system cannot find the file specified file" and "an error occurred while renewing interface local area connection : an address has not yet been associated with the network endpoint"?
View 3 Replies
View Related
Feb 25, 2011
For about two months now I have been experiencing a problem with my Internet connection. It started when I upgraded my Dell Inspiron 530s from 64 bit Vista to 64 bit Windows 7. After a day, I started getting the "Local Area Connection: A network cable is unplugged or broken internet connection." However, the cable is not unplugged. My other PC and laptop (which is wireless) can connect to the Internet, so I know it's not my ISP or my router. It only happens about every other day. It would work perfectly on day and other day I would go to my internet and I would have no connection. The weird thing is that when I restart my computer, it connects right away. My other two computers that was upgraded also does not have this problem.
First, I thought it may be the cable, so I replaced it with another cable I had. No luck.Then I thought it may be the port on the router, so I plugged it into one of the other ports (including the port that the working PC was plugged into). Next, I checked Device Manager > Network Adapters > Intel(R) 8256v-2 10/100 Connection. There is no exclamation point next to it. Plus, under Properties, it indicates that this device is working properly.I shut down all my computers, and unplugged the dsl modem and router. I waited a few minutes and then plugged in the modem, followed by the router. Once both of those were fully booted, I turned my computers back on. Still after a few hours, I lost connection.Following this, I went to Run, typed "cmd" and then "ipconfig." Under Windows IP Configuration, it reads:"Ethernet adapter Local Area Connection: Media State.........: Media Disconnected."
View 16 Replies
View Related
Jan 18, 2011
I have a WAG160N, with firmware 1.00.16. I run several wireless devices at home, a samsung TV, an ipad, an apple tv and an LG media center. I notice that whenever I switch on my LG media centre the wireles connection drops out to the other devices. Then I need to reboot the router and the wireless works again.
View 2 Replies
View Related
Apr 11, 2012
I'm trying to connect my router SR520 internal Ethernet port to my ESW520 24 port switch. When I physically connect the cable the port on the switch suddenly drops.
View 1 Replies
View Related
Apr 6, 2011
I have a pair of 5505's in transparent mode and connected them to C2960S. The inside interface (which is VLAN5 on the switchport) keeps dropping, going in to error state. There is no log reference in the switch and the interface shows as UP. The standby ASA has no problem, both interfaces on the switch is up. As soon as I failover the units over, the active node inside interfaces drops.
View 2 Replies
View Related
Nov 28, 2012
I installed windows XP and now I connect a cable from the router to the pc and I can't connect to the network.
View 1 Replies
View Related
Jul 31, 2012
I have coome accross a few sites that I see some unknown protocol drops on the internal interface connecting to the switch
View 3 Replies
View Related
Mar 23, 2012
I have 2 linksys routers installed on my home network. The primary router is a linksys WRT360n and is stationed inside the main home, while the 2nd is a linksys WRT160N located in my office. I've connected them via the lan to lan configuration and have disabled DHCP server on the 2nd. I can access the 2nd router via my primary PC but am unable to access the internet or see the primary from the PC connected to the 2nd router.
View 3 Replies
View Related
Aug 18, 2011
i just bought and installed tp link wireless G usb adapter TL-wn422G.
i was tring to connect to the internet but after about 30 second the connection to the internet was terminated, and i need to unplug the device and replug it , in order it will work again (for about 30 seconds more).
i have an edimax router and all my other devices are connect perfectly (laptop, iphone , galaxy s)
View 6 Replies
View Related
Aug 9, 2012
My desktop internet was working fine earlier today. I bought a new hard drive and installed it without any trouble. I plugged my machine back in and received a "no internet connection" message. I have tried (what I think is) everything: unplugged my modem and router and plugged it back in as if it was the first time with the 60 second pauses and whatnot; tested the connection with my cable modem service provider; unplugged and checked cable connections; did ipconfig/flushdns ... I'm really not sure where to go from here.My wireless configuration works fine, as I am able to connect both wirelessly and wired to the router on my laptop. I cannot connect via the modem or router to my desktop PC.Windows 7 running 64-bit, Motorola Surfboard modem (brand new), Medialink router (also brand new), custom built machine.
View 1 Replies
View Related
May 22, 2012
What is the cause of having a huge number ( 875349) of total output drops on one of my gigabit utp port gi 2/12 which is connected to Cisco 1841 fa0/0 router by mean of cat5e cable.I did change the cable from cat5e to cat 6 and tried to increase hold queue to 4096 and to tweak wrr queue bandwidth
View 4 Replies
View Related
Mar 13, 2013
One of my Catalyst 3750 switch have many out drops, I execute "sh mls qos int g2/0/3 statist" command, there are many output drops in queue3 threshold3. [code]
View 8 Replies
View Related
Mar 12, 2012
Having an issue with two Cat 2940, they have fiber 100Base-TX. Added a new Cat switch (the second on the VLAN), the existing Cat switch drops the fiber connection.
View 6 Replies
View Related
