Linking Two Wireless Routers?
May 17, 2011
I have a Netgear WPN824N and a Linksys E1000N routers. The linksys is connected to the cable modem and the netgear wan port is connected to the "2" port on the linksys. Computers connecting to the netgear can connect to the internet ok. But devices on the netgear network cannot connect to devices on the linksys network and vice versa.Can anybody explain to me how to set up so devices connected on one router can identify and communicate with devices on the other?
View 2 Replies
ADVERTISEMENT
Jul 23, 2012
I installed Windows 7 Ultimate on my computer, and I cannot get my Linksys to work on it, the light doesn't light but it shows up in device manager. I've tried using Vista 32-bit drivers but it doesn't work at all, I am thinking it isn't a driver issue at all because it shows that the driver is up to date.
View 1 Replies
View Related
Apr 23, 2012
I am trying to access the internet trough my WRT610N connected to a ZyXEL P-2601HN provided by my ISP.
I have the WRT610 all setup and working, but I cannot connect to the internet. The WRT610N is a the latest firmware version.
The WRT610 is connected (Internet) by cable to the Zyxel (one of the four ports)with a cat.5E patch cable.
the wireless is so much better on the WRT610N than the ZyXel.
View 3 Replies
View Related
Mar 9, 2013
Region : Turkey
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP : EXtend
I have a android box linked to my tv it works fine in wireless mode, but when I link the router to the android box hard wire, it does not recognise the hard wire link just carries on with wireless connection ?
View 2 Replies
View Related
Jul 12, 2011
I have a WAG320N working successfully on an ADSL line. I now have an E4200 that I want to link to it. I have it currently set up with the WAG320N using IP range 192.168.1.1 and the E4200 using 192.168.2.1.The E4200 is setup using the default - Automatic Configuration - DHCP and the internet port is connected to port 1 on the WAG320N. The E4200 links to the WAG320N successfully and picks up the correct external DNS addresses.I want to split the wireless network with the WAG320N providing the 2.4Ghz and the E4200 providing the 5Ghz.
View 6 Replies
View Related
Oct 21, 2011
I called up the ISP and had him activate the Sb6120 modem.The Dir-655 will not link up with the Sb6120 unless I drop the WAN port speed down to 10MB. Then it will connect. (the light on the modem will come on). I thought the modem was bad so I had the ISP deactivate that one and we tried another Sb6120 samething.I did the firmware update on the Dir-655 to current but samething.
Firmware Version :1.35NA, 2010/11/12
View 4 Replies
View Related
Feb 16, 2011
I have been trying to configure a 837 for a while now and I'm finally nearly there. So far the tests run(SDM interface test) and pass on atm0(WAN connection to the internet) but not on ethernet0. I am guessing i need to link them somehow but since I don't know the terminology searching for how to do it is turning out to be difficult.
Here is my config:
!This is the running config of the router: 192.168.0.1
!----------------------------------------------------------------------------
!version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
[code]....
I tried ip route 0.0.0.0 0.0.0.0 Dialer0 first with no luck to i added the ip route 0.0.0.0 0.0.0.0 ATM0 still nothing?
View 8 Replies
View Related
Jan 23, 2012
I don't know if this is the right place to ask but pretty sure you'll be able to answer my Q. I have to have my internet router/modem in the kitchen as its the only phone point in my flat currently working, but my partner has to run an ethernet cable down the hall from there to hook up his xbox 360. however, I want to be able to use ethernet for my laptop occasionally to get a better speed then over wireless as the wireless isn't perfect from the room i'm in and wondered what the best way to go about this was. I could also plug in my PS3 if there was a way to get all my devices connecting to the router without too many cables. I've heard of a switch.. what does this do? Or will a simple ethernet connector work for what I wanna do
View 3 Replies
View Related
Feb 22, 2013
In one area, we have a server, and two computers that use that server extensively. Right now all the computers are on wi-fi.I know if I ran the computers through a switch they could share data more quickly. The problem I have is there is no way to get a cat connection to this area.If I got a range extender with switching ports built-in would it still speed this data up? Or would it be irrelevant because it still has to travel via wi-fi to the router and back?
View 1 Replies
View Related
Aug 6, 2011
I have two locations both about 800meters apart, one is my home and the other address is a campsite where i have a linked router network (WDS with routers running ddwrt) where campers can all use the internet and also i have several IP cameras. Obviously both address have different gateways and therefore their own DHCP server. Everything was running perfectly until.I linked both of my address up using a long range antenna and now i am having problems.
Sometimes the two DHCP servers are competing with each other (i need both addresses on the same subnet in order to view my IP cams from home) and sometimes the computers log on to the wrong gateway. Its very annoying because the only way i can resolve it is by turning of the "linking routers" for a minute and then the Computers log onto the correct gateway. This happens to clients both side of the bridge. I have many different clients on both side of the bridge so assigning each computer (via windows) its fixed default gateway and DNS is out of the question as some of the clients are Camper's PC's and mine and my wifes laptops swap between both locations.
Now my query is, how can i block both DCHP servers from going over the bridge? OR can i have them on both separate subnets and still view my IP camera and still access all the routers from each subnet (i need this because sometimes i need to reboot the routers from home)
View 12 Replies
View Related
Dec 12, 2011
I want to link a tp link router as access point to a d-link router.
View 2 Replies
View Related
Jun 15, 2012
Dell laptop over the last two weeks will not link to wifi at home.I use it at work and it's fine. Does not cause any issues for anyone else on wifi network at work. Hooks right up to their system, no problem.However, when I get home, it will not link back up to home wifi. It will also disengage the desktop computer from the wifi as well.Even if desktop is off, it will not link with home wifi.
View 19 Replies
View Related
Jan 5, 2013
I have an esprimo fujitsu seimens laptop and have just purchased a kodak esp 3.2s printer. I have a belkin router and am unable to install the printer, it is not recognising the router.
View -1 Replies
View Related
Jun 30, 2012
I have set up port forwarding for my WD Network HDD, which runs a Media Server (Twonky). Now, I have tested the ports and accessed it through the internet and it works fine, until... I click a link to open a folder and suddenly I get a "No such page" error thing. I have however identified this problem, it seems that when I go off the main page it re-routes to the original network address, not my IP forward address. For Example if my IP was 82.9.12.456 and the port was 800 i would go to "82.9.12.456:800" and it would load but once I navigate i go to "192.168.0.*:800/*****" and does not load the page. If i then copy and past my IP into the URL it works, but this is annoying.
View 3 Replies
View Related
Jan 2, 2013
If your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.
View 6 Replies
View Related
Dec 31, 2012
The first router is wired to the DSL modem and works just fine as an access point with Internet access. The second router is wired from the first router using one of the 4 ports on both router hubs. The second router is visible but has no Internet. How to configure the second router regarding DHCP, LAN, WAN, DNS etc.
View 3 Replies
View Related
Jun 28, 2012
What Happens if I Used 2 to 4 more wireless routers acting as Main Routers in my network? that their DHCP are enabled? would it cause connection Disturbance? I Have 4 Cisco Linksys E300 all of thier DHCP are enabled..so they have 192.168.2.1,192. 168. 3.1, 192.168.4.1, 192.168.5.1
View 4 Replies
View Related
Jan 21, 2013
I am trying to connect 2 wireless routers to expand my wireless signal. I want to connect the router 1 (in 2d floor) to a powerline av and then get the router 2 to the powerline (in the ground floor) so i can have wireless there too. I've tried some configurations i found online, but can't get to make the network functioning. The routers and powerline av are all dlink. I don't mind having 2 networks, but it would be better to have only one
View 4 Replies
View Related
Sep 19, 2011
I want to connect two routers wirelessly without running cables , any easiest way without cables.
View 1 Replies
View Related
Sep 11, 2011
I have 2 internet connections in my office one via Verizon Fios and another one via the local cable company. On the fios connection I have an RV042 VPN router and on the Cable company connection I have an rvs4000 router, I would like to know if there is a way I can connect the 2 so I can share a printer I have on one of the 2 networks from the other network without using the VPN feature, like via an ethernet cable connected between the 2 and some kind of static route maybe?
View 6 Replies
View Related
Jan 24, 2013
I have RV042 and E4200 routers . I tried the manual UPnP port forwarding using Rv042 router and was succesful ( by typing 192.168.1.1 in the explorer and logged in using user name and password )
I am using a linux embedded system whose Internal IP ,Internal port are mapped .This system is connected to one of the LAN ports
I want to try auto UPnP port forwarding both for RV042 router and Linksys E4200 routers
After enabling the Upnp option only and logging out ,Can i add a port mapping entry in this router without logging in using a C++ program which runs on linux embedded system .
View 2 Replies
View Related
Aug 22, 2012
I was looking for a small business router that has VPN support and dual WAN support for load balancing. Upon reading reviews, I think RV042/RV042G is a good choice. Now am thinking if it supports intervlan/ router-on-a-stick configuration?
View 5 Replies
View Related
May 24, 2012
For my work I am looking to create wireless capabilities to remote locations. To do this we are using a standard modem/router that is connected to an Engenius (802.11b/g) wireless outdoor radio connected to a dish antenna. We are able to go to locations (3+km) and then with a corresponding receiving antenna (using LoS), receive the Internet and connect both to computers at the transmitting point as well as to the WWW. The problem exists is that we want to employ a series of routers at the receiving end that would be able to carry the transmission to a different location (relatively close), due to the fact that some of the locations do not have line of sight to the antennas. We are using Encore routers, model # ENHWI-N3. When we connect the radio's Ethernet into the routers WAN reciever, we can connect to the Internet with a computer. The problem exists is we want to pass that connection over to a second router (R2). This connection is done when the routers are on access points set to a WDS function with R1 having R2's mac address and vice versa. Both routers are set to channel 1. Even when the routers are seperated by distances >50m a computer plugged into R2 can see a computer plugged into R1. Files can be transferred between the 2 computers wirelessly at speed around 3 mbps. However computer 2 on R2 can not connect to the WWW. This router features a spot that lights up if it has Internet access and R1's is lit up but R2's is not. How do we transfer the Internet and not just a LAN from R1 to R2 so it can be accessed further away from the point of the radio and antenna equipment. This setup has also been used where R2 is hardwired to R3. At R3 we change the channel to 11, and then connect through that with mac addresses wirelessly to 4th router. If comp is in R4 and far away it can still access and file share from comp at R1.*edit the ip address for the routers exist all on 192.168.1.xxx If the 3rd number is different between routers would this make a difference?
View 1 Replies
View Related
May 26, 2011
everything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.
View 1 Replies
View Related
Nov 28, 2011
What are procedures to deactivate di-604+di-704 routers+make the repeaters,connecting each of them,in a wired fashion,to my Belkin wireless N router?
View 1 Replies
View Related
Mar 10, 2012
how to installs 3 router with same password
View 2 Replies
View Related
Jun 13, 2011
modem
........ |
........ |
----switch-----
|................ |
|................ |
Router 1.... Router 2
|..................... |
|..................... |
Computer 1.....Computer 2
......................Computer 3 Router 1 points to a VPNRouter 2 access to the internetComputer 3 needs to access router 1 (VPN). Both Computer 2 and 3 are in a different room than computer 1, and router 1. Computer 2 is networked via cat5e to router 2.Is is possible to have Computer 2 and 3 share the cat5e, yet access different routers?
View 5 Replies
View Related
Apr 30, 2011
Can I connect 2 routers to one phone line so that I can receive a wireless internet connection throughout my house?
View 1 Replies
View Related
Mar 21, 2013
I have the N600DB Wireless Router I am connected to the internet, but cannot open My Routers Homepage with http://router or http://192.168.2.1. How can I get to this page to reset the router settings? I also cannot connect any of my wireless devices to the network..
View 1 Replies
View Related
Dec 29, 2012
I have two matching N300 Belkin routers. The cable modem feeds into modem1 and modem1 feeds into modem2. I get a good wireless connection on modem1. Modem2 shows up on a wireless scan and it accepts the password. It however will not connect.
View 1 Replies
View Related
Jan 15, 2012
One moment the laptop was using the wireless connection from the router in our house and the next it lost internet access and then wasn't able to recognize the SSID or connection at all on the available wireless connections. We have reset the router and restarted the laptop countless times yet the only internet access we have is on the computer the router is hooked up to.The wireless connection works neither on the laptop nor the Wii, both previously works merely hours ago and with no problems until now.We assume there is an issue with the router itself, whether it be a loose ethernet cord (which only faintly can be moved in its place).It's almost as if the router is stopping them (Wii, and laptop) from having access. When we explore the wireless internet properties on the laptop, it shows the wireless connection, yet only there and doesn't give access to it. Could it be the router, or could the company have restricted WiFi only to the computer it is hooked up to?
View 1 Replies
View Related
Nov 28, 2011
Whether the Linksys WRT300N wireless routers are compatible with LWAPP configuration?My school lab setup uses Cisco integrated services routers with NM-AIR-WLC6-K9 network modules as controllers in the LWAP network. The controller accepts configuration without error but does not pick up or seem to see the WRT300 AP routers, so cannot push out basic LWAP config info
View 1 Replies
View Related
May 12, 2013
I am trying to setup to wireless routers onto one network. One router is the ES4500 the other is the Apple Time Capsule. The apartment I am in has thick walls and because of this, there are some wifi gaps. Trying to set the second router in a different room to act as a wireless bridge/access point for the first router.
View 2 Replies
View Related
