Linksys Wireless Router :: WRVS4400N Can't Connect To Internet
Feb 26, 2012
I cant get the WRVS4400N to connect to my cable modem. The WAN link light isnt even lighting up. Im wondering if this unit is bad out of the box. Is there a setting im missing to get them to talk to one another. This is no mention in any of the manuals.
Â
Connections: - The "Internet" port on the WRVS4400N to the "Network" port on my cable modem (No link light)
Â
Here is what i have verified at this point: - My old router connects instantly to the modem when plugged in (Same cable) - When i plug my laptop into the WAN port on the WRVS4400N i get a link light. When i plug the modem into the WAN port...nothing.Â
View 1 Replies
ADVERTISEMENT
Jul 23, 2011
As a temp work around I have two SSID now, one for everything else running WPA2 and one for xbox running WPA. The xbox seems to not like the router on WPA2 and though this would make one think, oh its your xbox, thats not always the case with devices. Some just may happen to want to use a feature the device doesn't support correctly and other devices are able to work around it while ones not so I cant for sure blame on xbox.
View 1 Replies
View Related
Jul 19, 2012
I have 2 WRVS4400N's  availible to be. One is running my network and security connected to my WAN.I want to use the other one stricly as a switch or even adding wireless repeat of my current wireless LAN.
View 1 Replies
View Related
Jan 13, 2012
I'm keep failing my pci compliance test I have a wrvs4400n and I keep getting "firewall udp packet source port 53 ruleset bypass" i've blocked port 53 but keep getting rejected. How to set the router?
View 1 Replies
View Related
Feb 26, 2007
I would like to connect to the built in accounts on the wrvs4400n from a mac VPN client. I am new VPN and have not found much information on how to establish this connection. Since Linksys seems determined to rely on Quickvpn, and provides no information on what it is actually doing under the hood I can not figure out how to configure any of the VPN clients available, or the built in VPN tools, for OS X (10.4.8). The only information I have been able to find seems to relate to setting up VPN Tunnels, or running a server behind the wrvs4400n and using one of the VPN passthrough options. I would like to connect directly to the built in accounts, how to set this up on a mac?
View 7 Replies
View Related
Apr 27, 2012
I would like to automatically check if the VPN is up or down, simple enough, and respond by bumping it, disconnecting and connecting, as needs be (not so simple I think).This through a C# program using HttpWebRequest and HttpWebResponse.It's simple enough to login to the VPN page using known credentials. Done deal. And also very easy to check a couple of known patterns in the VPN table.When I determine I need to bump the VPN, how do we simulate the form submission and/or call to the JavaScript programmatically? we're using a Linksys WRVS4400N router, firmware version V1.1.13.
View 2 Replies
View Related
Jan 24, 2013
I get a "IP address conflict" message on my wireless network. Using a WRVS4400n wireless router with the latest firmware that is set to PPoE. Motorola 336 dsl modem is set to bridge mode. My network has 2 computers attached: hardwire desktop and wireless connection to laptop. When I contacted ATT support, they said the problem is in the wireless modem. Are there some settings in the WRVS4400n that must be set to insure that each computer gets a different IP address?
View 2 Replies
View Related
Nov 8, 2009
I've been keeping an eye on my IPS report tab lately and have been watching a large number of ICMP_SMURF and DOS attacks originating from chinese ip address's. I know I can probably block the offending ip's through the ip based acl tab in the firewall settings, but I'm kind of a newbie how I can block certain ip's from touching my router?
View 3 Replies
View Related
Aug 29, 2011
I have a WRVS4400N setup as a main router for one of our bays. For wired connections it is working with no problems. When I first installed it it ran fine for wireless as well. I was trying to get WDS to work and at some point the wireless stopped working. My laptop can no longer connect to it and often cannot see it when doing a scan for networks. I have already checked that it isn't a problem with the laptop, that there are not other networks causing interferance, and even tried resetting to default configs.
View 1 Replies
View Related
Feb 10, 2012
The router will serve as an access point for 10 wireless station, 6 of them will run over Terminal server, the router will also serve 20 computer for the internet, so I want to Link aggregate the four LAN port to my swtich, I know how to do it on my Dell Powerconnect, but I want to know if the WRVS4400N will support it, there will be a lot of traffic going through the router so linking the 4 port in LAG mode to my Powerconnect swicth will speed up the communication
View 1 Replies
View Related
Jul 13, 2011
I cannot connect via VPN PPTP (normal setup in windows xp), I have managed to connect over VPN direct connected to internet, through the router (WRVS4400n) if I turn off the firewall. But I cannot connect with the firewall enabled,One more thing, the device is on and I have enabled the passthrough (and 'Multicast Passthrough' in firewall basic settings) for all available options where one of the options is PPTP.
View 1 Replies
View Related
Oct 6, 2011
i want to set WRVS4400N Route all traffic through
Â
it function as same as sonicwall Route All
Â
[URL]
View 1 Replies
View Related
Mar 12, 2013
I am attempting to setup a router with another vendor, but I am not wanting to give full access to the network just a couple IP addresses, most routers you can setup an VPN IP Range, but I can't find that setting on this Cisco WRVS4400N.
View 1 Replies
View Related
Jan 14, 2012
I bought a router Cisco WRVS4400N Wireless-N Gigabit Security Router - VPN v2.0 with the intention of using with the QuickVPN Clien for connecting to my home network.My home network is connected to a pre provide by my ISP Thomson and is connected to it but all my main network is controlled by the WRVS4400N, I have forward all the doors, as you can see by the log part below, and by analysing the log you can see that I can get any PING to complete the VPN connection. [code]
View 1 Replies
View Related
Oct 6, 2011
here comes the incident description: WRVS4400N breaks established VPN session if I am trying to connect to any LAN host via HTTPS.
View 1 Replies
View Related
Feb 17, 2012
I've been configured my device to forward FTP service to my server, however, I can't access this service outside from my network. I used Single Port Forward and not worked, after, I've used Port Range Forwarding starting in 20 to 21 and not work again.I've sniffed my computer and I've found just 3 outsides packages without response.I've tried with directly IP ADDR and DYNDNS ADDR, but neither one or other worked.
View 1 Replies
View Related
Jun 18, 2008
I have a linksys wrvs4400n router on which:The wireless computers are connected to the home network (v lan 1)Port 1 is connected to the home network (v lan 1)Port 2 is connected to the office network (v lan 2)And the printers are connected to port 3.Now I'd like to setup the router in such a way that all computers have access to the printers (port 3), but I don't know what v lan settings I have to use on port 3, or if it is even possible...
View 5 Replies
View Related
Nov 29, 2011
I just purchased a Toshiba Thrive tablet and I can't get it to connect to my wireless router. My router (WRVS4400N) works flawlessly with my laptop and desktop. I have spoken to a Cisco tech rep and they assured me that there is not a compatibility problem with the WPA-Personal setting I am using. When I speak to a Toshiba tech they tell me I have a router conflict. To verify this I went to my local Starbucks and low and behold it logged right on with no problem (The Starbucks system was not a protected system). This confirms to me that there is a conflict between the router and the tablet.
View 1 Replies
View Related
May 25, 2012
Linksys WRVS4400N won’t connect with my DirecTV DVR. I spoke with the DirecTV tech folks extensively about attempting this connection but I can’t make it happen and they are stating it is an issue with the router even though I have Wi-Fi throughout my house. I changed the password and deactivated all of the possible firewalls and still no connection.
View 3 Replies
View Related
Jul 1, 2012
Type:Â WRVS4400N Wireless-N Gigabit Security Router with VPN.I bought it last week. Its single port forwarding has an issue. I can only use that function for a couple or hours. Then the forwarding does not work. I have to reboot the router to make it available again.Â
View 1 Replies
View Related
Dec 10, 2012
Recently I upgraded my Internet speed at the ISP from 10Mbps to 25Mbps and the problem is that I am measuring only 15Mbps using [URL]On the day when the tech came out to install the new DSL modem, he noticed the difference and as part of troubleshooting, he bypassed the Linksys router and voila the net speed measured 25Mbps using speedtest.net.So, why my Linksys WRVS4400N V1.1.13 acts like a bottleneck in this case? I didn't have this problem at the speed of 10Mbps. The upload speed is OK, it is 5Mbs with or without the DSL modem.
View 2 Replies
View Related
Jul 24, 2011
So I have an WRVS4400N V2 and just got a new laptop with an Intel 6230 Wifi card in it and have an odd problem.While the laptop is on battery power the network gets massive packet loss.
I don't know what to do.Laptop manufacture says its AP but AP worked fine with old laptop and works fine when laptop is on power and all other devices seem to be fine with the exception of my Xbox 360 that wont connect if I have it on WPA2 but I will post another thread for that.
View 1 Replies
View Related
May 2, 2011
I just bought a Cisco WRVS 4400N router so that I can connect to my home network via VPN from my laptop when I am on the road. I have Windows 7 on my laptop.Â
View 1 Replies
View Related
Nov 4, 2011
finding my wpa key for my linksys wireless router to connect my PS3 to internet.
View 1 Replies
View Related
Jul 9, 2011
I'm unable to even get an internet connection with my router, so I cannot access the router configuration settings page. I already made sure that the ethernet cables weren't the problem. I hook the cables up as instructed, but can't get the internet connection. I'm running Winows Vista Home Premium and according to my ISP (cable service), the ISP settings should already be set up to connect automatically with the router. It's a used router (not new) and I've already reset it several times..
View 4 Replies
View Related
Feb 4, 2012
i have been using a WRT54GS LINKSYS ROUTER for 2.5 years problem free until now. All of a sudden i cant connect to the internet through it at all. when i diconnect it and hook my desktop directly to the modem it works but i need the wireless to use my laptop. I have tried everything to get it working again, no dice. when using w7 diag tool it reports back local area connection doesnt have a valid ip config.
View 3 Replies
View Related
Nov 14, 2011
I have a E2000 router that would go out and I would have to unplug and replug in every once in a while. Finally it just stopped working completely. I reset the router and now it won't let me connect. I have followed advice given to soembody else on here and went into router settings and cloned the mac, the IP address was there and reset my security settings. It let me connect to the network but not the internet...
View 2 Replies
View Related
Sep 22, 2011
Router: WRT54G
Network: 802.11g (and I'm using WEP)
Wifi Adapter: Intel R Centrino R Ultimate-n 6300 AGN
No. of devices connected to wireless network: 5
My problem is that whenever 2 devices have joined the wireless network, I will not be able to do so despite placing the laptop or iPhone right next to the router, hence getting excellent signal strength. Or, if I am already connected to the network, I get knocked out repeatedly. I don't think it is a hardware or software issue because I'm still able to connect and get a very stable connection after someone leaves the wireless network.This is getting frustrating and I have tried all ways and means to resolve this but to no avail. Is this about some setting that I can tweak, e.g. to allow more users onto the network? But this has already been configured to '50'!
View 7 Replies
View Related
Jul 8, 2011
When I connect the ethernet directly to my mac the internet works fine, but when I try to connect through my Linksys WRT54G2 V1 Wireless-G Broadband Router I can't connect to the internet. Omitting a few minor problems, my router has been working fine for the past year and a half. Recently it started giving me trouble so i have started trying a number of things to fix it, but I'm no expert in this category. The other day i tried updating the firmware which actually worked for a couple of hours, but then stopped working again.
View 3 Replies
View Related
Aug 30, 2011
shows connection to cable modem, shows IP lease, able to renew and release lease. shows all DCHP clients, but does not allow internet to get through. tried cloning old routers MAC, no dice.
View 6 Replies
View Related
Oct 12, 2010
I am replacing a WRH54G with a WRT54G. Â First I unplugged everything and waited 5 minutes. Then I plugged my ethernet cord from the DSL modem into the WRT54G. Then I plugged in the DSL modem. I waited for the lights to stop blinking. Then I plugged in the WRT54G and waited for LEDs to show connection. Then I plugged the ethernet cord from the WRT54G to the computer. Then I turned on the computer. I was able to access the Interface for the WRT54G but I was not able to connect to the internet. I tried power cycling multiple times both the DSL modem and the WRT54G. I was unable to access the internet. Finally I plugged the WRH54G back in and everything worked fine. why the old WRH54G can connect to the internet and the WRT54G cannot?
View 9 Replies
View Related
Dec 7, 2011
BEFW11S4
Version 3updated firmware to version 1.45.10
Ethernet works OK
non encrypted wireless works OK
Â
WinXP SP3 / Win 7 when tries to connect to wireless using WEp 64 or 128 bit does not connect?
View 2 Replies
View Related
Aug 3, 2011
Just got the new Linksys E1000, and follow the Cisco Connect to setup. No IP received from the service provider (which is Fibre-to-the-building, no modem is required). Goto the setup page and confirmed that the connection type is "DHCP".Once i unplug the cable from E1000 (internet port) and plug into my old wireless router, everything work nicely.  The internet connection & cable itself seems fine. Switch the cable into notebook, and get the IP as well, it seems the service provider didn't lock the mac address of the devices (routuer nor PC). Cloned the mac address but nothing improved.Tried release the IP before unplug from the old router, switch off old router, and wait 10mins before connected to E1000 but still no luck.
View 2 Replies
View Related
