Wireless Router Not Working With Certain Device

Jan 3, 2013

My problem is that we updated (yeah, right) our old router to a new TALKTALK one. Now my phone and one laptop device is connecting fine, no problem, but my old laptop that I need to go on is not liking the new connection. It's saying that it is connected but only local access is available and it says the connection is unidentified.

View 14 Replies


ADVERTISEMENT

Linksys Wireless Router :: EA6500 Device List Not Working Correctly

Feb 19, 2013

Since a couple of weeks I have a linksys EA6500. When I go to the device list to see which devices are online the device list is not displayig the correct data. I see devices online that are offline and also devices are offline that are at the moment online. When I try to delete a device that is offline in the list I get error 2315. I have that error in the local and cloud interface. The list has a frozen state from a particular moment.
 
When I reboot the router then all devices in the list have status offline and the device list stays that way. Nothing gets online anymore or will be added. When I reset the router to factory default all keeps working without problems for approximately 24 hours and after that the problem occurs again. The list freezes again and you are not able to delete a device.
 
I searched the forums but no one has this problem. I only can find a post that describes my problem but for them a reset worked. In my case a factory reset works also but the problem keeps coming back. 

View 9 Replies View Related

Linksys Wireless Router :: WRT54G - Websites / Wireless Device Stop Working?

Aug 12, 2008

wrt54g v1.1 After setting up the wireless router, I can use the internet on the pc as well as a wireless device. However after putting my pc in standby mode then back on, I can no longer connect to either. I have to restore factory defaults each time and re-enter all passwords and settings.

View 9 Replies View Related

D-Link DAP-1522 :: WPA Not Working With Android Device?

Dec 4, 2011

I am unable to connect and Android device (HTC Desire, Samsung Nexus S etc) wirelessly to the DAP-1522. I've search through the forums and can't find anyone else having issues with Android so I think it must be one of my settings. It works fine if I switch to WEP however I don't want to use the weaker hackable protocol. Any way to have the DAP-1522 in WPA working with an android device?

View 4 Replies View Related

Cisco :: LMS 4.1 / Device Discovery Not Working Correctly

Jan 18, 2012

we are running CiscoPrime LMS 4.1 and I have the following problem.I have configured SNMP Settings as shown below (the order of the targets is exactly as it is configured on the server):As can be seen we use three different read community strings. I also have exluded a bunch of IP ranges and IPs from the filter settings. When I manually start discovery everything works fine, meaning that all devices in the above ranges that need to be discovered are discovered as "reachable". The problem appears in the scheduled discovery (happens once daily). In that case only the devices with Read Community snmp1, get discovered as "reachable". All other devices with Read community snmp2 & snmp3, as well as those that are excluded in the filter settings, are discovered as "unreachable".The discovery uses DCR as seed and seed devices are also configured.I also have a problem with PingSweep in the discovery, but I will open another discussion so that I don't complicate this one too much.

View 1 Replies View Related

Linksys Wired Router :: BEFSR81 / Add Device Names To DHCP Device Table?

Nov 30, 2011

My BEFSR81 is my primary router and has DHCP turned on.  The router's DHCP range is set to accommodate 12 devices.  I have three computers wired to it and their Host names (as specified in the set-up of each computer) show up in the router's DHCP device table.  I also have two printers (one old Brother HL5250DN laser printer and one new HP Photosmart Premier C410a inkjet printer) connected and there are blanks where the Host name should go.  I would like to be able to tell which printer is which when I am looking at the DHCP device table.  How can I get a names associated with each printer's IP address in the router's DHCP device table?  (The real problem is that the router seems to have both printers at the same IP address (192.168.1.100) and if I can get one of them to change I'd like to know which one it was!)

View 1 Replies View Related

Cisco :: 2000 Series Not Working And Cannot Choose Any Device

Jul 12, 2012

Our LMS DCR include more then 1200 devices, ( ASR 1000, CISCO 2600, 2800 advanced ip services IOS etc. )Everything is working well except the IP SLA device table is empty.I can not choose any device from this table.How can i import/add devices to this table/database automatically ?

View 2 Replies View Related

Device Is Not Working Properly / Windows Cannot Load Drivers Required

Jun 19, 2012

This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.Plug and Play ID.When I test it says the adapter is working properly. I don't know if this matters but I am unable to get microsoft updates. I have 16 that continue trying to update but my computer will not allow.

View 8 Replies View Related

Cisco Infrastructure :: CCA 3.1(1) Device Setup Wizard Not Working For SR520-FE(W)?

Jan 5, 2012

Steps to repeat the bug:

1)  Physical Reset of SR520-FE to factory defaults

2)  Run CCA 3.1(1) and connect to 192.168.75.1 using the default cisco/cisco login

3)  Under the Home Menu, click the Device Setup Wizard

4)  In Step 1, sellect the SR520 and observe that there is also a photograph of the SR520-FE(W) model displayed as feedback for Step 1

5)  Try variations of Steps 2 through 4

Note:  Step 4 has a problem because it says to plug the power into the device, but if the power was not already plugged in to begin with, we could not run the Device Setup Wizard in the first place.

6)  Step 5 prompts for a user name and password. 

BUG:  No permutations of the documented default usernames and passwords "cisco" or "admin" work.  The result is always the error dialog:Device Connectivity Status - "Failure: Not Connected.""Return to Step 1.  Make sure that your PC is not connected to a network and you follow all the instructions."A search of the web indicates others are also had this unresolved issue with previous CCA releases.

View 1 Replies View Related

Cabling / Cards :: Broadcom Network Adapter 802.11g Stopped Working After Trying To Fix Unknown Device

Nov 3, 2011

It may be a coincidence but my Broadcom Network Adapter 802.11g stopped working after trying to fix 'unknown device' in Device Manager (It was working perfectly before this).OS: Windows 7 Starter on 'BenQ Joybook Lite U105'.I tried the Windows Network trouble shooter and it didn't work (saying there may be a problem with the driver. I uninstalled the driver and re-installed it (including a possibly newer one) and it didn't work. Within 'Network Connections" the Broadcom wireless adapter is shown as 'disabled' I R-clicked to enable it, a window popped up saying it was enabled but it still showed as being disabled. My feeling is that something is preventing it from being enabled, logically, I would guess. Also went to 'Component Services' and ether started or restarted everything with the word network on it still no luck..My Google search on an other pc , now on day 3, couldn't find anything. (BTW the 'unknown device' which according to the icon, seems to be the joybook itself, is still not fixed and still listed as 'unknown device').

View 4 Replies View Related

Wireless Router With Per-device Throttling?

May 18, 2012

I'm looking for a wireless router that can throttle per device. That is, a specific internal IP address can have a specific upload/download speed limit assigned to it that the device cannot exceed. I'm not looking to allocate bandwidth priority or block a specific protocol.

View 1 Replies View Related

Setup Possible For A Wireless Router Such As Linksys Device

Jan 4, 2012

I get internet through my Desktop using a wifi card that picks up the internet from my in-laws across the street (gets a really good signal btw). Anyway, that connection is perfectly fine, and up until recently I had been using a Hawking Range Extender to repeat the signal through my house connecting it to my PC's ethernet port and using the Internet Connection Sharing feature. For some reason that is beyond me it suddenly stopped working. Or rather, it will work for a couple minutes and then stop receiving packets.I'm thinking the device is faulty since it never actually worked that great to begin with. Is this type of setup possible for a wireless Router such as a lynksys device? Or would I need a repeater/range extender like I have been using?Again I would use the Wifi from my PC to share the connection with the Router to broadcast that signal through my house.

View 6 Replies View Related

Wgr614 V6 Wireless Router Only Allows One Device Or It Crashes?

Feb 3, 2013

I have a wgr614 V6 router, yes its old. I had 3 devices connected to it just fine before without any issues. But now It only allows my laptop, when I try to connect with my ipod touch or desktop, not only does it fail, the entire network crashes and my laptop loses it and its gone. It then takes about 2 minutes to come back up. So whenever I attempt to connect with another device the network crashes. so right now only my laptop is connected.I downloaded & updated to the newest firmware, did not work.I tried resetting the router, and made the network all over again, did NOT work.

View 7 Replies View Related

After Disable Ssid How To Connect Wireless Device In Router

May 6, 2011

actually, i have 2wire DSL Router and i am using SSID Broadcast Disable after disable i can't connect wireless to my extra device too for example my Blackberry. but i am using another computer with wireless but i can't connect blackberry and iphone i don't have more idea in wireless stetting what can i do?

View 2 Replies View Related

Connecting USB Internet Device Directly To Wireless Router

Aug 9, 2012

I want to buy a wireless router to which I can connect my USB internet device directly, so I don't have to turn on my PC all the time if I just want to use my moble phone or iPOD or other family members wanting to connect to internet.

View 1 Replies View Related

Linksys Wireless Router :: EPC 2425 IP Address Of NAS Device?

Jan 2, 2012

I have wireless Cisco Router, model number EPC 2425, which has a NAS device attached to it. I'm trying to find the IP address of the NAS device

View 1 Replies View Related

Linksys Wireless Router :: Wrt150n - How To Remove A Device

Jan 23, 2008

I have the wireless-n wrt150n router. I have it wired to my computer and have it wirelessly connected to my ps3. But for some reason there is another unnamed device listed under My Network. My network was not secure before, but I changed it to secure when I noticed the unnamed device. How do I remove that unnamed device from my network?

View 3 Replies View Related

Linksys Wireless Router :: Wrt160Nv3 - How To Reconnect A Device

Aug 29, 2011

i have a wrt160Nv3 wireless router.
 
I had a wireless device connecting to my network - so I blocked it.  Unfortunaletly turned out to be my daughters ipod touch.  How can i reconnect it back.  dont seem to be able to add device and linksys keeps blocking her connection attempts

View 1 Replies View Related

Linksys Wireless Router :: Wrt54g V.2 Can't Access Via Web To Device

Jan 31, 2013

I upgraded my wrt54g v.2 with a firmware for wrt54gl and now, the power light is continuous blinking and I can't  access  via web to the device.I tried to reset it and replace the firmware without success.

View 3 Replies View Related

Linksys Wireless Router :: E900 - Static IP For Device

Jul 22, 2012

I am trying to have one of my devices always get the same internal IP address. I have an IP camera that I have setup with port forwarding. I think I found where to set it, but it isn't 100% clear that I have it set correctly. I have a E900 wireless router.

From my router's homepage I went to Setup - Basic Setup --> DHCP Reservation button. Then I found my camera in the top box (Select Clients from DHCP tables) and checked the box next to it and pressed the "Add Clients" button. Now I see my IP camera (along with the IP address I want it assigned to and it's MAC access in the section labeled "Clients Already Reserved".
 
So, did I go through to the procedure correctly to have my IP camera always get the same IP address?

View 2 Replies View Related

Uverse Wireless Router - Laptop Not Connecting Internet With New Device

Apr 4, 2011

I have a compaq laptop running Vista. We recently had our Uverse wireless router/modem replaced. Now my laptop will not connect to the internet. The laptop connects to the router but shows up as local connection only. Uverse tried all kinds of differant things to no avail. The laptop will hookup with a USB modem but I would like to get it back to how it was before.

View 14 Replies View Related

DLink Router - Connecting Wireless Device To Hardwired Network?

Feb 7, 2011

I have just purchased a new ASUS Laptop for my wife.We are currently running two destop computers on a D LinK Router. How do I go about including the new computer on the network wirelessly?What do I need to purchase to make the transition easiest? The two desktops are running Windows XP Professional, the new system is Windows 7.

View 4 Replies View Related

Linksys Wireless Router :: EA4500 Not Showing Up In Device List?

Nov 27, 2012

I have an EA4500 and am using Cisco Connect Cloud software. Its working mostly fine except that I have one device on the network that will not show up in the device list. This is not an issue in itself and normally I would ignore (although it used to show up when I forst got the router) however..
 
The device is a WDTVLive media unit and required access to windows shares on a media server. Now the WDTVLive device is server an ip address by the router and is available from everywhere on my network but every couple of days it loses the capacity to search windows shares.
 
I know what you are thinking and I initially thought the same, this is an issue with the WDTVLive box. However one day I spent a few hours trying to resolve (Am an IT Consultant and know a little about networks) and found that I could not fix the issue. I then rebooted the router and it started working. I have since confirmed that every time it breaks I have to reboot the router.

View 7 Replies View Related

Linksys Wireless Router :: EA3500 Can't Connect To Internet From Any Device

Dec 22, 2012

I have full signal strength but I can't connect to the internet from any device. Internet works fine when connected directly to devices. Devices will show an IP address but will not connect to the internet. The first router worked fine for about a year and did the same thing so I replaced it but now after 1 month, this router is doing the same thing!

View 1 Replies View Related

Linksys Wireless Router :: EA4500 - Unknown Device On Network

Apr 9, 2012

I recently purchased a Linksys EA4500 Dual-Band N900 Router with Gigabit and USB. Everything set up great with no problems and after a day or 2 I managed to get all home devices connected (2 laptops, 2 printers, an iphone, 1 tv, 1 blu-ray, an old desktop, and a tablet). Everything was connected right and working and I installed the Linksys app on my iPhone which let me see what devices were connected and all that. Well, last night, an unknown device showed up as a connected device. It's labeled as: android_(insert string of characters) and has a MAC address. I've tried and tried to identify what this device is and I can't. Everything else on our network is still showing up independently of that device. I'm worried that someone using our connection and possibly putting our device security at risk. What can I do to A) try to identify what the device is and B) if it is an intruder, block it's access.

View 9 Replies View Related

Linksys Wireless Router :: E4200v2 Device Connection Drops

Jan 13, 2012

I have a couple incredibly annoying problems with my E4200v2.  I have one Win7 laptop that connects wirelessly and has been slowed to a CRAWL connected to this new router.3 of the 4 Android powered devices I have experience random and unexplained drops in Internet access.  It seems they stay connected to the router itself but they lose Internet.  Happens at random times and intervals.

View 9 Replies View Related

Linksys Wireless Router :: Can't Find Client Device For E2000

Jul 13, 2012

Can't find client device for E2000

View 1 Replies View Related

Linksys Wireless Router :: Droboshare Device Won't Connect To New E4200

Aug 17, 2012

connecting a droboshare device to a linksys router.  The droboshare that I've been using for several years and have A LOT of important files on works well with my old router (sagem) and now on my new e4200 doesn't appear to connect.

View 3 Replies View Related

Linksys Wireless Router :: E1000 - Password Does Not Recognize New Device

Nov 29, 2011

Model  E1000
 
I wrote down the password of my wireless router on installing it.  However, each time  I want to add a new device to the router, the password that I wrote down does not prompt the router to recognize the new device or equipment.  How do I go back into my computer and retrieve the password to my router if I did copy it down wrongly?  how to retrieve the password.

View 2 Replies View Related

Linksys Wireless Router :: Device Recognition With New Firmware On EA3500

Apr 26, 2013

Under Devices, I find that my Apple laptop (WIFI connection) and our Dell Desktop (LAN) connection are considered the same device.  The operating system the EA3500 shows for this device is the apple IOS system both connections and address numbers appear in this device.  This makes it impossible to set up separate parental control settings on each computer.  What could I do to get the EA3500 to recognize these as separate devices?  I have already tried forcing the WIFI network address of the Apple to another address.  All that happened was the device address updated in on the EA3500 device list, but the LAN and WIFI addresses remained together still under the same device name and MAC OS on the device list.
 
I have the latest firmware loaded on my  EA3500.  This was not an issue previously when I ran the old firmware. Below is a what I see in the device listing showing the LAN address for the Dell and WIFI address for the Apple all on the same screen.  When I turn one device off, the respective entry goes away.  Only when both computers are off does the single device entry on the EA3500 reflect being offline.

View 4 Replies View Related

Linksys Wireless Router :: E1000 Device Name In Network Infrastructure

Jul 15, 2011

installed the E1000 router that AT&T provides with U-verse DSL.  All works fine except that the device name that appears under "Network Infrastructure" in Windows 7 shows the original default name that Cisco assigned instead of the name I chose.  It does not affect operation or performance but looks oddball.  I don't see how it can be changed.

View 4 Replies View Related

Linksys Wireless Router :: E4200 V2 - Limit Bandwidth On Particular Device?

Jul 6, 2012

I want to know how I can manually limit the Kbps for a particular devince in the QOS.I DO NOT want to simply set the priority (low/med/high). I want to "physically" limit a device.
 
When I select to do it manually (upstream bandwidth) it limits ALL devices and I do not want this. I want to limit the bandwidth on only one device that is connected (ie an Xbox)
 
I have a Linksys E4200 V2

View 9 Replies View Related

Linksys Wireless Router :: EA6500 Multiple Devices Under One Device?

Oct 14, 2012

I got the new EA6500.  For the last few days I've noticed there are multiple devices showing under one device with different IP addresses.  In the beginning they show up individually with their own device names, then somehow combine.  Each device is different ie. computer, phone, DirecTV box, etc.  I did a hard reset, re-flash and still it keeps happening. 

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved