Hp Dv6000 Can't Connect To Att Uverse Wifi?
Mar 24, 2011
I have an HP dv6000 that has an atheros ar5007 b/g card built in, windows vista home premium, the system was recently restored to start fresh for a new user (my daughter).The ethernet port on the side works fine to get online, the wifi is on and does find connections out there including our att uverse, it will connect to our library's and our community rooms free wifi, and to a neighbors unsecured connection as well, but no matter what I do I can't get it to connect to OUR att uverse!I do know the passkey and its verified with all our other laptops, iphones, ps3 etc, i tried updating the wifi cards drivers from the hp site, i turned off the firewall, re-tried the passkey, its not erroring on that just won't connect.There is this diagnose thing that does nothing, I have also reset the att uverse and restarted the laptop all same results.Then I thought maybe windows updates were needed, so plugged in via ethernet cord did those restarted, still same thing (won't connect to our att) but strangely still does connect to other wifi so i am pretty sure its not a bad card inside the machine or anything.
View 7 Replies
ADVERTISEMENT
Jul 25, 2012
My WiFi card went out in my HP Pavillion dv6000 and I tried installing an external adapter. Actually I've tried 2 different ones and both try and try to connect but can't. The signal is strong but connectivity is weak. I think the problem is that when my brother installed the first one (belkin) he enabled security on my internet connection. He lives in another town and he can't remember what the security code that he put in is. I never had any problem connecting when my internal wifi was working and the connection wasn't secured. how to disable security and make it like it used to be so that I can see if this will let my external card connect? I uninstalled the Belkin and installed a netgear and that wouldn't connect either.
View 3 Replies
View Related
Sep 29, 2012
I have setup a new wireless router and then connected to my laptop, my netbook, my ipad and my mobile.. I had no problems initially but the problems arise when sometimes my internet connection goes off.. after that when i switch on the internet connection then, all my device are back on track except for my laptop(HP Pavillion DV6000)
This problem gets solved automatically only sometimes when i restart my laptop. otherwise it does'nt detect my own wifi SSID.. it detects my neighbour'snetwork but not mine
View 6 Replies
View Related
Mar 4, 2011
I've been having some trouble with my ATT router. I've had it for months and there have never been any issues until now. It does not seem that it is broadcasting WiFi like usual. It will not show up on the WiFi network list on both my iPod and my laptop. I've tried resetting the router (by unplugging it and plugging it back in).
View 5 Replies
View Related
Mar 24, 2013
I am having trouble connected my HP DV6000 laptop to the internet using the ethernet cable. The wireless on my laptop no longer works therefore connecting directly to the router. The connection using the ethernet cable has worked before but now that I am home I can not get the connection to work. The status shows as "limited or no connectivity" and when I click on repair it says "windows could not finish repairing the problem because the following action cannot be completed: renewing you IP address". The laptop runs on Windows XP Service pack 3. The IPCONFIG /ALL information is
Windows IP Configuration
Host Name . . . . . . . . . . . . : naledi_laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
View 9 Replies
View Related
Jun 19, 2011
HP Pavilion dv6000 won't connect to my home wireless EDiAMAX BR-6204wg router via wireless. The HP will connect wireless in other locals and is working with a LAN connection to same router. This is our daughter's machine with Vista and we have trouble finding our way around in it. [code]
View 14 Replies
View Related
Aug 27, 2011
I have ATT Uverse. My laptop connects just fine but after I had my desktop fixed, I am not able to connect to the internet on my desktop. When I look for wireless networks, I am unable to find any. I am using a Netopia Wireless USB Card
View 1 Replies
View Related
Feb 17, 2012
I have a HP DV6000 Laptop. The wireless coverage is not very good and I was thinking of upgrading the Wireless card to something better. The current card is HP Pavilion DV9000 PCI-Express Wireless WIFI Card 802.11a/b/g 441075-001 by HP. Is it even possible to install another card in the laptop or does HP limit what you can put in this laptop
View 3 Replies
View Related
Jan 26, 2011
I have a HP Pavillon dv6000 laptop, tried connecting to my wireless network this morning but no luck. It will connect fine when using Ethernet cable. Whether the switch is pushed to on or off the light stays orange, when it is connected it used to turn blue. I've included a prtscrn of my device manager...
View 3 Replies
View Related
May 26, 2011
I have a HP Pavilion dv6000 with windows xp. A couple of days ago the computer couldn't find any wireless connections. I've been into devmgmt.msc and looked, but I don't see any network card. In the folder Network Connections there are three alternatives, and none are wireless...I've tried to download the drivers for chipset, modem and network, but I still can't find anything.
View 1 Replies
View Related
Jan 7, 2013
Having HP Pavillion DV6000 laptop and the cd/dvd drive worked fine up until they got a virus on the computer and then went to Walmart and purchased an AV program and installed and ran the AV program. I think the program was Norton. I have completely scanned and removed everything I can find on the pc with numerous programs, but the cd/dvd drive still does not work.
Here is what the drive does...when a disc is put in the drive light comes on and you can hear and feel the drive spinning (I have tried 3 different drives in the computer and they all do the same thing). The pc will not boot from any disc...they light comes up at boot up, but will not boot. Putting a disc in the drive in Windows and trying to access the disc you get something like drive not ready, insert a disc. All connections are solid. The drive shows up in Windows Explorer as well.
View 15 Replies
View Related
Jan 30, 2013
I have been trying to connect to my 2Wire Uverse wireless router and it not going well. I had it connected and for other reasons I went into the router setup and disabled wireless, did nothing else. When I enabled wireless again (and did nothing else) I could not connect my Win 7 computer. Everything else connects just fine so I know it's not the router but this Win 7 computer.When I click on the connections icon it shows me all the available wireless networks and the Uverse show but has a red X on it and the popup says something to the effect it's trying to connect but the connections are not the same as are in the profile or the info.
View 14 Replies
View Related
Aug 26, 2011
What does the message: Failed to run service When computer first opens, the above message has to be deleted before I can get on internet.
View 1 Replies
View Related
Aug 25, 2011
So we just had Att Uverse installed in our apartment and the 2wire box has not been too reliable. I was trying to set up my Linksys router to provide an additional wireless network but i was having some problems with the set-up
View 3 Replies
View Related
Apr 6, 2011
We've had UVerse for about a year now - but lately we've had weird problems:
-about every 2-4 weeks, the router will spend a night constantly locking up and rebooting itself. ATT says they don't know why, and wanted me to check the power?? When it does this, it will do it for 30 minutes to TWO HOURS.
-every couple of days, the channels will freeze. If we change channels and then back, it returns to normal for a bit. Sometimes for a while, sometimes only for a minute. We have two boxes, each one does it. Even affects DVR playback. Internet doesn't seem to be affected, so I had originally though it was the boxes. ATT has remoted in, and can't find anything out of the ordinary.
View 3 Replies
View Related
Feb 4, 2012
I have att uverse which is wireless G. I want to add a 2nd router behind it that will have wireless N. I've made the connection. I see it on my list of networks but doesn't allow me to access it.
View 2 Replies
View Related
Mar 14, 2011
I just had new att uverse Internet installed today. My other 2 laptops, iPhone, and iPad connect and can browse the Internet. My compaq computer says it is connected to the Internet by 2WIRE but when I open Internet Explorer or Safari it cannot display the webpage. I tried troubleshooting with an att tech support rep and they said I need to contact my manufacturer to resolve the issue
View 12 Replies
View Related
Oct 4, 2012
I have ATT u-verse currently and it connected to a router but I am going to need several more gigabit ports so I wanted to get an 8 port gigabit switch. I would plan on running a cable from my U-Verse modem to my router then to my switch giving me wireless and 8 gigabit ports. Would that work? I've never done this before so I wasn't sure if I was missing something or not.
View 2 Replies
View Related
Jan 13, 2012
I connected a switch and the device is not even recognized in my router site.
View 12 Replies
View Related
Aug 29, 2012
I recently "upgraded" to Uverse from DSL. While the speed boost is nice, UVerse comes with a 2wire residential gateway. Unfortunately you can't disable the DHCP functionality in the 2wire router, nor can you disable the router functionality completely and just run it as a modem, which has pretty much made it impossible to integrate into my network.So the partial solution anyway is to keep using the rv082 (yey!) behind the 2wire, assign a public static IP to the rv082 WAN1 i/f, disable the firewall in the 2wire for the rv082, and up and running again.The problem I'm facing now is that I had 3 devices on the LAN that were published using individual public static IPs. With good-ol'-DSL, I could use the one-to-one-NAT feature in the rv082, block any unwanted traffic in the firewall, and everything works. Unfortunately with the configuration options in the 2wire, I can only assign a single public IP address to any one device hooked up to it, in this case the rv082 WAN1 port.i have the one-to-one-NAT configured sequentially on the WAN and LAN side on the rv082 with nothing else hooked up to the 2wire. For example, one-to-one-NAT configuration in the rv082:
WAN range: 66.77.88.91 to 66.77..88.93
LAN range: 192.168.0.2 to 192.168.0.4
The 2wire is allocating the first public static IP in the range to the rv082 (i.e. 66.77.88.91). This works 100% reliably for this address - however because I can only assign a single address in the 2wire interface the other devices are no longer accessible externally. Curiously it kind of partially works, but not reliably. I can briefly connect to one of the other addresses (say xx.92), but then connectivity is lost to the others.Someone suggested I try using the Dual-WAN feature to get at least two addresses assigned to the rv082. Seemed like a good idea in theory, i.e. because the 2 WAN ports have different MAC addresses, the 2wire should see two different devices and allow me effectively to assign two public IPs to the rv082, e.g. 66.77.88.91 to WAN1 and 66.77.88.92 to WAN2. Of course failover mode won't work here, because only one is connected at a time. However the load-balancing mode did seem like it may work, but something is going on that I don't understand. Internal connectivity is working fine and I can access the internet, but for some reason the 2wire is getting really confused and constantly re-assigning IP addresses to the rv082. I don't know if this is because the host name is the same for both WAN1 and WAN2 ports, or there is something in how the rv082 does the load balancing.
- Is there any tricks to getting the Dual-WAN to work in the way needed to essentially have two simultaneous internet connections?
- Would it be possible to buy a 2nd rv082 and have it on the same LAN? How would I configure this?
- Is there an alternative Cisco router that may work better with what I'm trying to do?
View 9 Replies
View Related
Jan 25, 2011
How can I connect and configure a new AT&T Uverse 2Wire 3801HGV gateway with an older 2wire 1701HG gateway as a router to add more IP addresses in a home network? The 3801 currently feeds a wired lan through three 16 and 8 port switches, and feeds way too many wireless users too. Plus, the 3801 also feeds the VOIP phone system and TV (non HD). I now know the 3801 has a max of 10 or 12 IP addresses that it can handle (where was that little detail in the AT&T material?). The 1701 can and has fed more than 50 wireless and wired connections easily for years. So, what needs to be done make the 1701 feed the wired and wireless lan from the 3801 gateway, as well as let the 3801 continue to feed the VOIP, TV, and some of the wireless lan needs at the same time?
View 3 Replies
View Related
Apr 4, 2011
I have a compaq laptop running Vista. We recently had our Uverse wireless router/modem replaced. Now my laptop will not connect to the internet. The laptop connects to the router but shows up as local connection only. Uverse tried all kinds of differant things to no avail. The laptop will hookup with a USB modem but I would like to get it back to how it was before.
View 14 Replies
View Related
Feb 21, 2012
Trying to set up the Cisco VPN router for remote acces to our network.We have ATT Uverse DSL and it is a Motorola Router, i think NGT 510.the Uverse router has very limited setup options.I cannot set it up as a bridge.The only thing I can figure out is to set the ip passthrough option to the VPN router.We have a static ip address for our internet service.
I have tried several setup and connection options, but cannot get it to work.
1. How to physically connect the routers and network devices?
2. How to setup both routers to play nice.
View 1 Replies
View Related
Mar 16, 2011
I am using my wireless adapter..a Linksys AE1000..to connect to a friend's ATT U-Verse high speed internet for a few weeks. Due to a petty argument with his girlfriend..I overheard her and her friend and discovered that she had logged into the Uverse router/modem (192.168.1.254), which shows all devices that are connected. On this page it has links to access files for each device. Clicking on that, she was able to read all my files. Nothing to hide, I just don't like snoopers and even wonder if she could change settings or do something to mess up my computer. I cannot figure out how to block access by her Uverse thru my Linksys wireless adapter.
I normally do not allow any sort of file sharing and everywhere I have looked on my PC, nothing is enabled to file share or remote desktop share or anything like that. I'm not a total noob but have no clue if and how I can change this on my end so that she cannot get into my PC while I'm connected to their internet. Their router/modem is a 3800HGV-B.
View 1 Replies
View Related
Feb 6, 2012
I have a WRT300n router and want to connect to my Uverse Gateway. When I connect them & try to use the internet connection I get an error that says a connected router must be capable of using DYnamic IP addresses.
View 1 Replies
View Related
Feb 10, 2013
I need to increase my wireless speed higher that what Uverse gateway is supplying. Want to install a 802.11 N router behind the uverse gateway and disable the uverse wireless. Uverse gateway will allow this.
View 4 Replies
View Related
Mar 1, 2013
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
View 12 Replies
View Related
Aug 9, 2011
i have cable internet. and im supposed to get up to 15Mbps. but i only get that on a good day. i average around 10Mbps.but im paying $60 a month for the 15Mbps. i can get at&t u-verse at 18Mbps for $39.95 a month for 12 months. then it goes up to $44. does any one her use U-Verse? and do you think its a better deal then cable?
View 3 Replies
View Related
Jan 7, 2013
when i connect my sylvania netbook to my wireless internet it says connected, excellent signal but when i try to pull up a web page it says can not connect to server...
View 1 Replies
View Related
Aug 13, 2012
Any way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies
View Related
Apr 18, 2011
Have a router called WBR-T2 Wireless ADSL 2+ Gateway. Have been using it for around a year. Has been working great until now. When I attempt to connect to the network using any of the devices in the house (iPod, Laptop and Xbox) the connection is never made despite the connection being visible when searching. The following router lights are ON or OFF:
The power is ON
SYS is ON
DSL is ON
WLAN is ON
USB is OFF
LAN 1, 2, 3, 4 are OFF
View 3 Replies
View Related
Oct 14, 2012
I've had this setup for years now, custom ssid and password on my router, altho yesterday my pc said i was connected to "Slayer 2" (my ssid is Slayer) i found it weird so i went to wifi settings and i deleted all the ssids in an attempt to re-connect to "Slayer" thing is now, even tho my pc detects my ssid, when i try to connect to it, it says password is wrong. this is very weird cuz i can connect to it on my portable and tablet.My pc stills connects to other ssids with np, so i think the prob is not my network adapter.I've tried to change the ssid, didnt work.tried to change the password and didnt work either.googled a bit and did the winsock reset commands, didnt work either.currently posting this from my pc which has now an ethernet cable coming from the router.
View 19 Replies
View Related
Jun 11, 2012
i'm trying to hook up the wii with wireless connections but it's just not working.. what should i do?
View 1 Replies
View Related
