I have a 6Mbps ADSL wired connection in my home (located right next to the apartment building) and plan to upgrade it to the maximum speed my ISP can offer. Any plan which include a list of hardware and software required and how to go about setting it up.
View 2 Replies
I have a wired broadband connection with a modem. My internet service provider does not have Wi-Fi. Can I convert it myself into wi-fi by connecting it to a router. If possible how?
View 6 Replies View RelatedWhen I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq
[code]...
We have a situation where services are stopped on the real servers. The probes fail and we confirm the services are not running on the server. We cannot access the ports from the ACE directly. We can still however acces the VIP on the TCP port (L4 VIP class-map). So we can still telnet to the VIP on the port from thr Client side of the network.This is on ACE 20 Modules deployed in Routed mode. The version of software is A2(3.3).
Tried removing multi-match and loadbalance policies as well as class-map and re-applying then re-appyling the service policy to interface. Same behavior,This is a problem at another level as some services are being monitored by GSS via TCP keep-Alive and this obviuosly causes a problem as the service then never goes off-line.
I have a fresh installation of LMS 4.0 on windows server 2003, when i click to open topology i get error message : ANIServer service may be down or Host name isn't DNS resolvable
i tried pdshow -brief ANIServer ===> service UP
DNS is working using host file in driversetc i restarted the server
restared the crmdmgtd
unistall / install java plugin
pdterm ANIServer
pdexec ANIServer
NO change ..
I'm trying to secure my wireless service
View 1 Replies View RelatedI unplug router and modem and restarted but still does not work
View 2 Replies View RelatedWhat does the message: Failed to run service When computer first opens, the above message has to be deleted before I can get on internet.
View 1 Replies View RelatedFor some reasons my laptop "lost a wireless connection to the internet. Basically each time I try to connect I get the following message "The window wireless service is not running on this computer.On the other hand If I connect directly to the modem I get internet connection.
View 8 Replies View RelatedI need to set up a DSL service from a wired router to a wireless router
View 1 Replies View RelatedWindows 7 with wireless adaptor connection
I switched to Win. 7, because XP getting slow in general. I've using the brand new Netgear wireless adaptor on Win.7 while the older wireless adaptor is still on XP, but I never use XP after switch to Win.7.
On XP, Wireless connection had no issue at all, however on Win.7, the wireless connection often saying 'not service available' at the right bottom corner.
On XP, Netgear was 150 and Win 7 is 300.
Just wonder whether I should take off the wireless-adaptor from the XP if that would work to boost the wireless connection on Win.7?
I cannot make a long distance fax with my phone card & HPOffice Jet 6500A-It will take the long distance fax # then say long distance is not supported.If I dial my phone card # - It then asks to press 1 for english, 2 for spanish and there are no dials lit to enter the language choice. If that would go through, I could enter my pass code then dial the long distance fax # once my available minutes are confirmed.It seems like this was not thought out on this machine - how am I to make a long distance fax with out having to purchase long distance service from the phone company?
View 1 Replies View RelatedI have access to free wireless service but it requires a security key? How do I get this key?
View 3 Replies View RelatedI'm trying to add an IPAd to my wireless wifi connection..How can this be done. I called my internet service and they told me I needed a PASSWORD from you cause I own your router.
View 2 Replies View RelatedWRT54G v7 - cannot specify service provider
View 9 Replies View RelatedWiSM WLAN Service Module WS-SVC-WISM-1-K9 in 6509e running VSS IOs s72033-ipservicesk9_wan-mz.122-33.SXI2a.bin having trouble to get the IP from service-vlan DHCP.The pertinent config is as follows.
!
vlan 300
name WiSM_Service_Vlan
!interface Vlan300
description *** WiSM Service-Vlan
ip address 192.168.200.1 255.255.255.0
[code]....
The service IP is supposed to have been populated with an address from the dhcp pool. I am also unable to connect to it by doing a session switch 1 slot 4 processor 1. I get the following upon attempting to do so:
HO2NET0001##session switch 1 slot 4 proc 1
The default escape character is Ctrl-^, then x. You can also type 'exit' at the remote prompt to end the session Trying 0.0.0.0 ...
I recently configured CISCO 3310 box with MSE version 7.2. Services are up and running in the box, I could add the MSE to WCS and also able to track the location using WCS. However, I could not connect the third party software to MSE web services to get the location information there. When I hit the server url "https://<my mse>" I get list of possible services like:
Error 404 - Not Found.No service matched or handled this request.
Known services are:
http://my server:8880/hs/
http://my server:8880/mdp/
http://my server:8880/admin/
[code]....
I browsed through the documentation (CAS_71.pdf) and found a text saying:
Note Port 80 will be enabled on the MSE if the enable HTTP command was entered on MSE. Ports 8880 and 8843 will be closed on the MSE when the CA-issued certificates are installed on the MSE. I am running the test system so I do not really want to install CA signed certificate, so I used self signed certificate and restarted the server, but it did not work.
We are trying to set up Out of band connection for Cisco 5508 WLC and when we try to ssh to the Service port from a remote switch, this fails. SSH or Telnet to the Management IP address works fine. The Service port and Managment IP are in the same IP scope but different subnet..i.e 172.16.10 for Management and 172.16.99 for Service port. Also, as this set up will be HA (AP SSO) in future, for which DHCP is recommended for the service ports, just wondering if SSh will be possible.
View 7 Replies View RelatedI have applied for a dynamic dns service, but need applying in linksys E1000 settings
View 3 Replies View RelatedRegion : United Kingdom
Model : TL-WR940N
Hardware Version : Not Clear
Firmware Version :
ISP : BT
I've been having some issues with my BT Broadband for a while, so decided to switch to a new router, a TP TD-W8960N, however setting up QOS isn't as easy as I had anticipated (I'm fairly new to this!).
My main issue is that we have a fairly limited broadband connection, but I need to backup work using backblaze. This is a pain because as soon as it starts to backup it eats what bandwidth we have. What I want to know is can I just limit the range of ip-addresses which they use for their backup?Is there a simpler auto-QOS approach I could use? The router is currently running the latest firmware that isn't in beta. Also - do these routers auto-update firmware?
I purchased a refurbed? router on the internet, not supported any longer by Cisco Chat. I have a wireless internet: WiMax thru Clear wireless. I have a Linksys voip box coming off it for my phones. I installed the disk that came with the router, followed the directions, and got a message that Internet could not be found. Went to the live chat and followed some advice that did not work, conflict with voip? bypassed the voip and ran a cable from the wireless modem to my E3000.
View 3 Replies View RelatedI use ACS 5.3.0.40.8 with TACACS+ servicing Device AAA and RADIUS servicing the Cisco Wireless environment for AD user access. How can I implement 802.1x with the current RADIUS implementation with hindering current wireless users or am I hindered due to the EAP-GTC in use with PEAP via RADIUS?
View 3 Replies View RelatedI am currently installing a NM-AIR -WLC 6 wireless module in a 2811 and its giving me the follwing errors below and status.I have checked the trouble shooting pdf and says might be possible hardware error. [code]
View 4 Replies View RelatedI have Cisco Wireless Lan Controller 5508 with 35 (3600 Series Access Points. Do i need to purchase Mobility Service Engine for this or no need? Do i need WCS server for this or no need?
View 1 Replies View RelatedI use the Service port connected to the managementVLAN to manage the WLCs. When configuring HA with AP SSO, I lost HTTPS connectivity to the WLC, telnet still works fine.I researched the deployment guide and it states:
- When AP SSO is enabled, there is no SNMP/GUI access on the service port for both the WLCs in the HA setup.Why is remote access disabled using GUI when using HA, and how can I keep management of my WLC using HTTPS and an address in the ManagementVLAN.
how can i replace my wlc2504 to a WLC5508 without disconnecting everybody, i have 3 SSID, on different VLAN.. I want the WLC5508 to be the main WLC, so i can remove the 2504 from the network. On the WLC5508, it will be the same configuration of the 2504. Is there a procedure or a wiki on such operation?
View 8 Replies View RelatedI have an E3000 router, 2 computers connected via wires, and a PS3, airport express, laptop, and a few other devices which connect wirelessly. I've been having intermittent difficulties with specific services disappearing within my network. From time to time, some of the services which run across the network stop working; The Airport disappears (cannot contact it via airport utility or see it as an airplay destination), and the Playstation stops being able to contact media server running on wired computer. When this occurrs, all devices are still able to connect to the internet, and I am even able to copy files between a hard wired computer and laptop via CIFS (windows file sharing) protocol. Power cycling the E3000 solves this; the airport reappears, the PS3 can once again see the media server running on the PC, etc.
View 2 Replies View RelatedI've been configured my device to forward FTP service to my server, however, I can't access this service outside from my network. I used Single Port Forward and not worked, after, I've used Port Range Forwarding starting in 20 to 21 and not work again.I've sniffed my computer and I've found just 3 outsides packages without response.I've tried with directly IP ADDR and DYNDNS ADDR, but neither one or other worked.
View 1 Replies View RelatedA client is using Tmobile VOIP using the aforementioned WRTU54G-TM 2-line VOIP wireless router with 4-port hub. What they would like to do is to place this in their network and NOT have it change (route) the network addresses being assigned to devices 'behind' this router so even their wireless devices are all "on the same network" as the wired devices BEFORE this unit, In essence, preserve the same 'network and subnet mask' that is being issued by their DSL router via it's integrated DHCP server. ... Rather like operating this unit like an 'access point' instead of a router.Under most circumstances, I might try to assign this router a static IP outside the scope of the DHCP range the DSL router would supply, then plug the (gigabit) Ethernet network cable into one of the 4 Ethernet ports on the rear of this router - but apparently this does not 'facilitate' a connection to Tmobile's VOIP service.When attempting to do this, the connected telephone devices do not get a phone line connection and the status light(s) that normally indicate proper operation do not illuminate.
View 3 Replies View RelatedI have a WRT100 wireless router, which is configured for a PPPOE connection to my ISP. After running one of the tools to determine responsiveness of DNS name services, I would like to manually configure my DNS services, placing a more responsive service as my first DNS choice. In the router administration, I can configure three static DNS IP's. However, I don't see any place in the configuration to turn off the automatic DNS configuration from my ISP. So, when I issue an IPCONFIG /ALL on my computer, the DNS listing shows two DNS Name Services from my ISP ahead of the three static DNS IP's that I configured.
View 3 Replies View RelatedIf I have a wireless network set up with the Linksys E1000 using one internet provider and then change the internet provider service to someone else, do I have to reset up the network or is it simply a matter of connecting the new internet service to the router?
View 3 Replies View RelatedI am attempting to access the service port from a client pc on another network.
Service port = 10.100.2.1/16
Client IP = 10.1.1.10/16
I know you cannot put a default gateway on the service port, but the documentation says you can add a static route for remote management. So I tried...
config route add 10.1.0.0 255.255.0.0 <gateway.ip>
It does not take the command and says something to the effect of. "ip address/netmask conflicts with the configured ip address of the service port"
I have a Cisco AIR-WLC2006-K9 in my Cisco lab where I work on my Cisco skills, I recently had the need to update the software on my WLAN controller but his is according to the website only available with a service contract. On trying to get a service contract I found that the device is EOL and EOS and ths no serrvice contract can be purchased for this device and hence no ability to download software for it. So here is my question, when a device is EOL and OES and service contract can no longer be acquired for a device why does Cisco not either open these up for download AS-IS or provide some kind of agreement for people like myself who have moslty EOL and EOS equipment in their labs where we can acquire the needed software to keep our skills sharp in an affordable way ?
View 0 Replies View Related
