Linksys Cable / DSL :: Wag325N Down After Editing Host File
Oct 12, 2011
I'm using the Linksys Wag325N which always served me well. I've always been able to get my VPN to my workplace going. Until now. I've edited a hostfile on my mac (etc/ppp/ip-up) to get a route setup to be able to use internet and the vpn at the same time. But now the vpn would work no more. Why do i think that it is a router problem? Because other computers in my home network aren't able to establish the vpn they used to work with for a long time.
1. is it possible that my /etc/ppp/ip-up on my computer messes up the router?
2. Is there a way to completely reset my router? Tried "restore to factory settings" which did not work. Is there a "harder" reset?
View 3 Replies
ADVERTISEMENT
Sep 13, 2011
I cannot access my server through my WAG 325N Router from any of my office computers but all still have wireless internet access.
View 2 Replies
View Related
Mar 5, 2011
I have a lynksys Router WAG325N Wireless+ADSL2 .... It was working fine till last week.. Now its not working, When I reset I can connect through wireless on IP 192.168.1.1... But I cannot connect with lan port(checked with all the ports).. Even its not pinging...My system firewall is turned OFF... I am using a straight Cable.. I Updated the firmware.. but same result.. I dont know more about configurations.. Is it hardware issue or configurations?..
View 1 Replies
View Related
Aug 15, 2011
I've just attempted to uprade the firmware on my WAG325N from 1.0.6 to 1.0.12 the latest, over wireless. It will not work with Ethernet. It started to upgrade and failed with a garbled screen in my browser. No message to reset. Tried a complete reset several times. Pressing reset, power off for 30 secs. When I attempt to connect wirelessly with browser, just get a garbled screen, with no menus.
View 1 Replies
View Related
Jun 9, 2011
Yes, latest firmware : Firmware Version:V1.00.12
I have a D-link wireless-N USB adapter whos MAC address starts with 1C:xx:xx:etc. Unfortunately the QOS GUI does not allow me to enter a MAC address that starts with anything but a zero (0). This is a javascript verification so I guess it would be fairly simple to modify this. Is it possible to have the firmware updated so these MAC addresses are accepted?
View 1 Replies
View Related
Jul 10, 2011
Basically sometimes I suffer from serious lag! I want to best setting to get the most out of my modem. What are the reccomended setting for this modem?
View 1 Replies
View Related
Apr 5, 2010
I tried putting in for a Return # number for my modem but was told I can't get one even though its under warranty because I can't find the receipt.The modem LAN port 1 keeps dropping to 10mpbs instead of staying at 100. Is there anywhere I can get firmware 1.00.13 for this modem.
View 5 Replies
View Related
Jan 26, 2012
I would like to edit .cfg configuration file of Cisco SLM2008. However, I can't read the file because I don't have a good editor(.cfg is a binary file).
View 1 Replies
View Related
Jan 25, 2012
I am trying to configure this router to obtain an IPv6 address from my ISP who offers a dual stack IPv4/IPv6 DHCPv6 Prefix Delegation service.
I did a WAN packet capture to see the type of DHCPv6 packets the router sends to the ISP in order to obtain an IPv6 address and I saw that the router is sending DHCPv6 solicitation packets of type IA_NA i.e. for Identity Association for Non-temporary Address. However, most ISPs that offer a dual stack IP4/IPv6 service, they use DHCPv6 Prefix Delegation in which case the router is expected to send DHCPv6 solicitation packets of type IA_PD i.e. for Identity Association for Prefix Delegation.
I then downloaded its configuration file and saw the following:
dhcpv6c = {}
dhcpv6c[1] = {}
dhcpv6c[1]["renewTime"] = "3600"
[Code].....
So, the option for the DHCPv6 client to perform a prefixDelegation request is disabled. Does that mean that if I set this flag to "1" it is going to work? Well, I edited the configuration file and changed this flag but the router refuses to load it! It complains about the file being changed. How does it know that? Is it computing some type of checksum? How can I manually edit this flag and update the router's configuration?
View 2 Replies
View Related
Sep 9, 2012
I work in a service desk in +100 company and lately i got a task to gather all the host file entries that are on our network's PC's.We operate on windows XP 32&64bit, W7 64bit. Is there any tool that i could use to scan all host files within our network. I tried google of course but maybe i type my search phrases in a bad way to find something useful to my needs.
View 4 Replies
View Related
Jan 19, 2012
Windows 7 OS
I can ping and connect to servers by IP address from my workstation. However, Sys Admin wants everyone to use the DNS name instead. The only way I know to add DNS names is to modify the host file on the workstation. Sys Admin has forbidden users from modifying their host files.
How else can I map these IP addresses to DNS on a Windows 7 machine?
I have tried modifying the domain, thinking I can use the DNS entries on the domain server. Did not work. If this should be working maybe I'm not using the right domain? Any way to determine what domain to use?
I am decent in using command line, feel free to give non-GUI based answers.
Notes:
- I do know how to modify host files, including the Windows 7 work-around for having this locked out. But it's a "rule" by the Sys Admin not to do it. So I'm trying to adhere to the policy
- Sadly, asking the Sys Admin for the alternative tactic is not an option. Lame but true.
- I have scoured the internet for info on this issue. Everything I find either involves modifying files or enabling services on the server, or modifying the host file on the workstation. Even looking at the server settings is out (I don't have access).
View 2 Replies
View Related
Feb 24, 2013
I have a problem with my Linksys X3000 and Samsung TV. When I use X3000 as Media Server and connect TV from Lan, I see the list of MKV files, but when a want played TV displayed that file not supported!I knew, that TV support this format from USB, and installed the Twonky MediaServer 6.0.34 (as on Linksys X3000) on Virtually Machine under Windows XP and try, but again displayed file not supported.Then I change (Virtual_Machine_IP:9000/config) in Media Receivers "Generic Media Receiver" on "Samsung TV" and My can play mkv files without problem.Why I can not entered to Twonky Media Server config page (I see a "Service not available") and why I can not change "Media Receivers" on the X3000?
View 9 Replies
View Related
Jun 17, 2011
Since i upgraded to the latest firmware my WAG160N reboots, the same as others that i read here in the forum, now i need to revert to the old firmware but sadly when i check the File is not Found. Please, re upload the old firmware.
View 1 Replies
View Related
Feb 17, 2012
main differences between these two linksys wag325n vs wrt120n Im a home user and im about to buy one of them.
View 4 Replies
View Related
Feb 9, 2011
is it possible to upload a htm file to the router using a command prompt? the page is located at [URL] I want to change the option of Allow All to Restrict Access at 8pm every night?
View 3 Replies
View Related
Feb 29, 2012
I want to know if WAG325N supports cisco's IOS so that i can configure it using command line interface? Is it possible?If not, how would i change ethernet interface speed setting so that it can support 100 mbps of speed. Because when i connect through LAN i'm always getting a full dulplex 10 mbps LAN connection automatically.
View 1 Replies
View Related
Nov 2, 2012
Using the host file to block inappropriate websites on a pc works great.But i was wondering can you do the same on a wireless router.for some reason i can not find the option to do this on my netopia router.
View 2 Replies
View Related
Feb 16, 2012
So I have a proxy server in my home that all the computers use to access the internet (XP Pro). I edited the host file on the proxy to redirect traffic for various reasons (ad blocking, etc.) But I have noticed that it doesn't seem to affect the computers that use the proxy. For example one entry in the host file could be 127.0.0.1 abc123.com so that abc123.com would loopback to the localhost. For some reason this isn't working. Is there anyway to get this to work without changing the host file on each individual computer?
View 3 Replies
View Related
Jul 31, 2011
I recently bought the WAG320N can I block Peer to Peer file sharing on my Network?
View 3 Replies
View Related
Jul 31, 2011
I bought my WAG320N, I too have the internet drop out and from reading in here is a very common problem. Cisco really should bring out a new firmware version and address this issue. Any way you can block peer to peer file sharing with the WAG320N? If so how do you go about it?
View 1 Replies
View Related
Apr 28, 2011
When pusing configs using tftp, for example using Ciscoworks, does it push out an entire new config or does it just edit specific changes?
View 1 Replies
View Related
Feb 19, 2013
We have a few voip phones, with the voip server in the building. The hard phones have been trouble, with dropouts and occasional bad quality phone calls. The sip provider is absolutely hopeless. The modem router is a DG834Gv5 with fw V1.6.00.33. There is no option in the router interface to edit QoS settings. How can I improve our voip system? have an iphone connected to a handset or something, could that? We are using an iPECS-50A voip server and iPECS LIP-8012D phones.
My second question is in regards to auto attendants. I need to edit auto attendant settings. I assume this is done using the VOIP server. When the IP address is entered, I get a station program option and Admin & Maintenance. Where would I find auto attendant?
View 1 Replies
View Related
Jul 25, 2012
I found how to change the mac address by registry editing in windows for ethernet but can`t find a mac address for wlan... even in linux i m not able to change mac address for wlan using macchanger?
View 2 Replies
View Related
Mar 7, 2012
I have a client that is running ACS 5.3 as a VM in ESX 4.1. The client wants their VMWare admins to have the ability to shut down the ACS server during maintenance etc... I know I could create a CLI user with admin priviliges, however, assigning full admin priviliges is beyond the scope of what the user requires. They simply want a user account with the added privilige of performing a halt from the CLI. In the CLI Reference Guide for ACS.
So is it possible to create an account with user priviliges, then modify its permissions to allow for a halt?
View 3 Replies
View Related
Oct 3, 2012
i have to configure 80 Cisco 876 routers, so i planned to copy config via tftp from one configured router to PC, edit it in text editor (change ip addresses, dhcp pools, vpn keys...) and then copy it via tftp to another router, etc... Configuration looks fine and it works when i paste it in cli, but when i copy it via tftp i'm getting strange problems like dhcp not working or snmp not accessible. Am I missing something.
Here's config from router with dhcp problem:
ROUTER#sh run
version 15.1
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers(code)
View 2 Replies
View Related
May 7, 2012
How can i connect my PC with laptop with LAN cable for high speed file transfer?
View 2 Replies
View Related
Jul 19, 2011
I have a desktop with a "black screen", but the computer is running. I need to get files/documents off that computer. How can I get them without being able to see the monitor? I have a netbook, a portable hard drive, and regular ethernet cables, but not a cross over cable.
View 1 Replies
View Related
Feb 10, 2011
I'm just wondering if its possible to ping an IPv4 host using the IPv6 host assuming that the NAT64 has already been implemented?
[code]...
View 2 Replies
View Related
Jun 27, 2011
I have a host that can successfully connect to a PIX 515E (7.x OS) via VPN Client; however, I have no IP routing to the LAN from the remote host.The VPN IP pool works finem,The LAN default gateway is the inside interface on the PIX; the network is flat L2 behind it.The default route on the PIX points out; no other routes are defined,The VPN remote host can be pinged from LAN hosts, but the VPN remote host cannot ping any LAN host, not even the PIX inside interface.
View 2 Replies
View Related
May 7, 2012
ASA 5510
Ver 8.2(5)
I have been looking all over the place for the answer of how to allow clients on an IPSEC VPN to ping from host to host.
View 4 Replies
View Related
Dec 22, 2012
In the past few days I have seen an odd named Client Host "The-Britannic" show up on my DHCP Active IP Table list. There is no device (that I'm aware of) with that name on my network. I delete it but it reappears, and is linked to the same IP (192.168.1.101) and MAC address everytime, so it appears to be a legitimate device. Although it looks like a legitimate device, it's not - so far as I know. I have added the MAC address to the blocked list (internet access / access restriction) to see if I or anyone in-house losese internet connectivity on any. So far, no. Searching various malware and spyware sites turn up nothing.
I realize the IP address is assigned by the router through the automatic DHCP assignement process. I do not broadcast my SSID and have a complex passcode assigned to both the wireless and internal network. Of course, that is no 100% guarentee that someone has not gotten in.I'm running a WRT54GL, all Windows 7 PC's on a home built network. I'll probably change all the passcodes (wireless and Windows Home Network) to see if that disallows access.
View 1 Replies
View Related
Dec 13, 2012
I have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.
View 3 Replies
View Related
Apr 23, 2013
With this modem, can you hook up to the Linksys Smart Apps WiFi?
View 2 Replies
View Related
