Planet IPX 1900 Upgrade Failed
Feb 5, 2011i cant get access to my router IPX1900 after upgrade the last firmware version?
View 3 Replies
ADVERTISEMENT
Linksys Wired Router :: Cisco 880G And Planet MH-2001 But Transparent
Feb 3, 2012As my main router i have the CISCO 880G with the ip 192.168.1.1 at the ethernet interface 0 and my WAN connection at my ethernet interface 4.If the other end of my cable from ethernet intrface 0 i put it to another device which has the IP 192.168.1.2 to its WAN port and define the DMZ port of that other device as transparent with rules to pass all but to register and filter some things.When i have them like this i cannot reah to neither CISCO neither other device with ip 192.168.1.2.
View 1 Replies View RelatedLinksys Wireless Router :: WRT54G - Upgrade Are Failed
Jul 24, 2011I have Firmware Version: v4.21.1 and whenever I try to upgrade it to the latest one it says "Upgrade are failed!"
View 8 Replies View RelatedLinksys Wireless Router :: WRT54G Failed To Upgrade
Oct 28, 2011I've had my WRT54G for a year few now andhave the occasional problem, were I end up powering off the Modem and the WiFibox to get a connection.So having a week of I thought I should tryand update the firmware and see if this solves the problem.I have a WRT54G Ver 2.0 and am running Win7on my main machine with IE9.I Downloaded the firmware update(FW_WRT54G_4.21.4.000_20110712), and while the update was loading I got a errormessage about Update not taken, this was while the Progress bar was about 3/4through, I click OK and waited a while to see if the progress bar moved anymore, butafter 10 min nothing appear to have happen. So I powered the box offand on again.I appear to be able to see my other PC andmy NAS drive but the WiFi and the broadband connect was gone.I reconnected my PC to the Broadband andlooked for a connection, but none that I’ve found seam to work. I found a referenceto a TFTP utility, but all the links on your site appear to be dead, so I haven’tdownload it from anywhere else in case its different to your.
View 9 Replies View RelatedLinksys Cable / DSL :: How To Recover From Failed Upgrade Of X3000
Mar 7, 2012My device is Linksys X3000 modem router.What happened: I `ve tried to upgrade my router over Wifi connection and it failed.when the progress was at 98%. Obviously I should not have done it over the WiFi.There wasn't any warning when I`ve done that.When I got to this situation, my modem has had only power LED on and it was shining red.I have tried using reset button(including 30sec-30sec-30sec method), but it did not recover the modem itself(asI later found out, it did reset the config only). The following method of recover worked for me:
- connect PC to the modem using wired ethernet connection
- if the IP address is not automatically assigned(i.e. DHCP server is down on the router), then assign it statically on the PC. This is a key moment. The subnet you should depends on whether the config was already reset by this time. If it was, then use the default network settings.
It should be 192.168.1.x subnet. The modem should have 192.168.1.1, you can take, for instance, 192.168.1.20 for your PC. Then go to the browser, and go the router`s IP address(192.168.1.1 with default settings). You should see a very simple web page(different from the standard interface), prompting.you to upload the binary image file and upgrade.After doing so, the modem reboots, and stands up!
Still, I think even given that I`ve tried to upgrade the modem using WiFi, that should not cause issues by itself. I expect that the modem would firstly download the binary completely,verify its checksum, and only then switch to it. So I can`t imagine how flaky wireless connection would disrupt this process. I believe the issue is caused by a bug.A support lady have also confirmed I should not have used WiFi for this purpose.If that`s the case, then there should be some sort of warning in the management interface before starting the upgrade, and perhaps, even a protection against usage of WiFi for the upgrade.
Cisco Infrastructure :: 2821 - IOS Upgrade Failed Several Times
Dec 19, 2012I am running 12.3(11) T8 on Cisco 2821 platform and trying to upgrade to 15.0. No luck. So I tried to upgrade it to 12.4 24T. But failed several times on different routers. Is there an intermediate version I should land before jumping to 12.4 24T?
View 3 Replies View RelatedCisco AAA/Identity/Nac :: Cannot Upgrade ACS 5.2 Transfer Failed (code 1)
Nov 29, 2011I am facing an issue with several ACS appliances (some other work well) when upgrading to version 5.2.0.26.8.
When I launch the command acs patch install, I receive the following error message (we use FTP):
Failed to copy file '5-2-0-26-8.tar.gpg' from repository PatchRepository
(Error -302)
% Error: patch install 5-2-0-26-8.tar.gpg from repository PatchRepository - transfer failed (code 1)
This happens on three appliances but I could successfully upgrade 4 other appliances.
What is the reason behind this error code ? What could I do solve it ? I have already tried to create another repository on another server, without success.
Linksys Wireless Router :: WRT350N - Firmware Upgrade Failed
Oct 20, 2007When upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.
View 4 Replies View RelatedLinksys Wireless Router :: Firmware Upgrade Failed - WRT54G V2
Feb 28, 2013just troed to update FIRMWARE re our WRT54G_v2
current FIRMWAREFirmware Version: v3.37.7
downloaded and tried to run 130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
BUT got msg' Upgrade are failed!;
D-Link DIR-655 :: Boot Failure After Failed Firmware Upgrade Through Chrome
Feb 12, 2011I've tried to upgrade firmware through chrome, but chrome abruptly shut down during upgrade.Since that, I have not even loggin set-up menu which should be shown up putting 192.168.0.1 to make it back. Amber light is just blinking on Power lamp.
View 2 Replies View RelatedD-Link DIR-655 :: A4 1.32NA Will Not Upgrade Firmware / Upload Failed Error
Dec 25, 2011first one had to get rid of because just wouldn't work with a 3CX server, anyway, I have a DIR-655 A4 factory shipped with 1.32NA I am trying to update the firmware to 1.34NA but it will not let me. It keeps saying Code:
View 6 Replies View RelatedLinksys Wireless Router :: WRT54G-TM - Upgrade To New Firmware Failed
Dec 5, 2011I'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading
View 3 Replies View RelatedLinksys Wireless Router :: WRT54GS / Firmware 4.71.4 - Upgrade Failed?
Aug 19, 2012The label on my router says "WRT54GS" and the current firmware is 4.71.4.
View 1 Replies View RelatedTP-Link 300Mbps Wireless :: WR1042ND - Firmware Upgrade To 3-15-4 Failed
Feb 10, 2013Region : UnitedKingdom
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3-14-4 to 3-15-4
ISP : Primus Saver
I had it all working fine, then I wanted to upgrade the firmware. The original firmware was 3-14-4. I downloaded and applied the 3-15-4 firmware. Now when it powers on the power light is on all the time. Immediately the sys, 4, 3, 2, 1, Internet, usb and wps lights flash once. Then about 5 seconds later the 4, 3, 2, 1 & Internet lights flash once, then a second later the cycle starts again. When I connect it to the PC it starts to make a connection on the NIC, but then the router resets. Model: TL-WR1042ND, Ver 1.3 . Is there a way to reset the firmware or get it working again?
Cisco Wireless :: WAP121 Giving Firmware Upgrade Has Failed
Jan 8, 2013I get the message "Firmware upgrade has failed. Please ensure that valid entries were specified in the required fields." when I try upgrade the firmware rootfs.bin.
View 4 Replies View RelatedCisco LAN :: Failed To Upgrade ASA5505 License From 10 To Unlimited Users
Sep 4, 2011I´m trying to upgrade a Customer's ASA 5505 base license from 10 to 50 users (ASA5505-SW-10-50=). But the reseller sent a ASA5505-SW-50-UL= license instead. I tried to register that license and the following messaged appeared.
Wrong Sku(s) 'ASA5505-SW-50-UL=' for 'ASA5505-K8' : Device contains following licenses 'ASA5505-SW-10,ASA5500-ENCR-K9'
Serial Number = JMX1235Z0TZ
same platform type as the failed serial number. An upgrade request is not allowed. open a Service Request using the TAC Service Request Tool at [URL].As an alternative you may also call our main Technical Assistance Center at 800-553-2447.Sincerely,Cisco Systems Licensing.
I tried to contact TAC for assistance but It's not possible because that kind of service is outside the parameters of the service contracts associated with my cisco.com profile.
Cisco Switching/Routing :: Catalyst 3750X Upgrade Failed?
Jan 27, 2013I try to updgrade a stack of two 3750X-48PS to the IOS 15.0-2
Same commande has the twelves others stack I have upgrade lately
archive download-sw /overwrite tftp://x.x.x.x/c3750e-universalk9-tar.150-2.SE.tar
or
archive download-sw /overwrite usbflash0:/3750/c3750e-universalk9-tar.150-2.SE.tar (much faster!)
At the end I have this message :
extracting c3750e-universalk9-mz.150-2.SE/info (511 bytes)
extracting c3750e-universalk9-mz.150-2.SE/c3750e-universalk9-mz.150-2.SE.bin (19842267 bytes)
[Code].....
Linksys Wireless Router :: WRT54G Firmware Upgrade Failed?
Feb 2, 2013I tried to upgrade firmware (I entered my model number WRT54G and hardware version 2 into Cisco menu and downloded the upgrade file they provided. My version was v2.02.7, downloded file FW_WRT54Gv4_4.21.5.000_20120220.bin . After I run the upgrade it said upgrade failed. After that I can't connect to internet and can't access the router. I tried to reset it and unplug it- no luck. From my PC control panel I see local area connections status connected, but as I said, it does not connect to Internet.
View 7 Replies View RelatedLinksys Wireless Router :: E4200 Firmware Upgrade Failed?
Aug 24, 2011I just bought a Cisco E4200 (from someone on Ebay, so returning is probably not an option). I was in the process of setting it up when it wanted to do a Router Update. Unfortunately, it did not specifically say to not do it WIRELESS. We had a disconnection in the upgrade process. Now the Power light just blinks. I can ping it from a hard-wired PC, but cannot get to the Administration Web page to retry the firmware update (I did download it from the site). Also Cisco Connect cannot connect to the router.
Oh Yes, I have tried holding reset button for 30 seconds, unplugging for 30 seconds, and replugging in the router. I do not get any different results.
Cisco Switches :: SRW248G4 Firmware Upgrade Failed / Cannot Restore
Dec 12, 2012with TFTP upgrade SRW2xxG4_FW_1.2.3.0.ros and WEB interface after the restart, the switch will not start, display HyperTerminal link. You can also restore the switches do not?
View 1 Replies View RelatedCisco Switching/Routing :: 3750 Switch IOS Upgrade Failed
Oct 4, 2012I have upgraded my 3750X switch from
c3750e-universalk9-mz.122-53.SE3
c3750e-universalk9-mz.122-55.SE5.bin
later that by mistake i typed delete /force /recursive flash:now, I am unable to load new IOS error loading "flash:c3750e-universalk9-mz.122-55.SE5.bin" Interrupt within 5 seconds to abort boot process.Boot process failed...
Linksys Wireless Router :: WRT160Nv3 - Firmware Upgrade Failed
Feb 22, 2012My router: WRT160Nv3
My Firmware Version: v3.0.02
Upgrade version: Ver.3.0.03 Build 3
I can not upgrade, always gives the same error message: Firmware upgrade failed!
Cisco Routers :: RV220W - Upgrade To 1.0.4.17 Failed Due To Invalid / Corrupted Firmware
Mar 10, 2013I have a RV220W running 1.0.1.0. When trying to upgrade to 1.0.4.17 I receive an error: "Upgrade failed due to invalid/corrupted firmware".
I found this article: [URL]
I assume I have to do a factory reset then an upgrade in order to upgrade properly.
If I do a backup running 1.0.1.0, then upgrade to 1.0.4.17, then do a restore, would that put me back to 1.0.1.0? I'm trying to avoid configuring the router manually all over again.
Cisco Switching/Routing :: 3845 - License Installation Failed With Error / XML Parsing Failed
Jan 19, 2012I am having Cisco 3845 series router with c3900-universalk9-mz.SPA.151-4.M2.bin IOS . I want to install new Licence on it for DATA. When i am trying to install licence on it i am facing the error "% Error: License installation failed with error: XML parsing failed".
View 4 Replies View RelatedCisco WAN :: 1900 New DSL Router Recommendations
May 8, 2013I have a client whom uses a DSL 10 MG circuit as their backup circuit for Internet Connectivity in case of a failure. The circuit uses a DSL modem that is unreliable. I was recommending yesterday tot he client that perhaps we could place a Cisco router in place of the residential grade DSL modem /router currently in place.I wanted to place a 1900 ISR G2 in there, which would allow me to swap the DSL module out whenever I can talk the company into a Metro E connection. At that point I could swap the DSL module out and put an Ethernet module in to receive the Metro E. I was not able to find a solution last night using the Dynamic Configuration Tool. Seems DSL has been phased out.Is there any recommendation that could be made to accommodate this clients request for a Cisco router that will handle DSL?
View 7 Replies View RelatedCisco WAN :: ISR 1900 Unable To Recover?
Oct 8, 2012I have a new ISR 1900 router on which i accidently deleted the default username and password and now i am unable to get in to router console. Also i am unable to break in to Rommon mode as well.
View 2 Replies View RelatedCisco WAN :: 1900 - Unframed E1 Controller In IOS Ver 15.1?
Apr 1, 2012We've just bought Cisco 1900 series, we encounter a few problems
1- The IOS version is different from our previous router. Previous version is 12.4 , our new router is version 15.1
2- Below is our previously working config for controller . The channel group must be unframed
!
controller E1 0/0/1
channel-group 0 unframed
!
3- Hoewever the config below is from our newly bought 1900 series IOS ver 15.1 . However they do not support unframed format.
!
controller E1 0/0/0
channel-group 0 timeslots 1
!
Cisco VPN :: VPN SSL On 1900 Series License
Oct 7, 2012I bought 1921-SEC-k9 so i have security license installed: Technology Package License Information for Module:'c1900' [code] Now I'd like to know if SSL VPN comes with that license or do I need to buy additional VPN SSL license to use it? If so.. i'd just use IPsec... i need client-to-site configuration.. can you point me to tutorial or just a basic config.. because for ipsec i just find site-to-site tutorials on internet.
View 8 Replies View RelatedCisco WAN :: 1900 Router Supports SNMPV3?
Feb 8, 2013We are using Cisco 1941 Router as CPE where we wanted to trap CPU, Memory & ISYSTEM MIB. The same we are achiveing using SNMPV2 but when we tried using SNMPV3, there is no response for these MIBs.
We tried to configure SNMPV3 using below Link but still there was issue. There was response fr [URL]
Wanetd to know SNMPV3 MIB are supported for Cisco 1941 Router IOS Code universalk 15.2(3)T1 & Data License. When we tried using Cisco IOS MIB Locator, we are not able to see any MIB for SNMPV3. whats is that mean. Does this Platform + IOS Support SNMPV3 or not.
Below is the Snapshot from Cisco IOS MIB Locator for said image.
[Code]......
Cisco WAN :: 1900 - Port Forwarding Configuration
Apr 2, 2013interface GigabitEthernet0/0
ip address x.x.x.36 255.255.255.248
ip nat outside
ip virtual-reassembly in
no ip route-cache
duplex auto
speed auto
no cdp enable
[Code]
ip nat inside source static tcp 192.168.1.252 22 x.x.x.36 6922 extendable
ip route 0.0.0.0 0.0.0.0 x.x.x.33
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 1 permit any
Anything wrong with my config? port forwarding to my ssh wont work. Im using CISCO 1900 Series.
Cisco VPN :: 1900 Routers - IPSec S2S Tunnel Cannot Up
Apr 23, 2012We have about 9 1900 routers and 1 ASA 5510 for partail mesh VPN network. So 8 1900 connect to 1 1900 and ASA located in HQ and datacenter. All worked well however there is one site running really strange. The tunnel between 1900 is up for a while and down. Reboot router seems to be the only fix. But tunnel to ASA does not seem to be down at all.
The issue happened again today, we rebooted the router on site but tunnel still not up. DEBUG shows: deleting SA reason "Death by retransmission P1 "
I can see alot of Apr 24 19:57:55.271: ISAKMP:(0): retransmitting phase 1 MM_NO_STATE...
To me it seems like the IDE packet sent but never got reply and timed out. I did also check on the other end, the HQ. All other tunnels are still running fine on that router, just this remote site. Plus I got the similiar output when debugging on HQ router.
One thing do notice though, there was no match on both router for the ACL to match/permit ESP traffic... I asked on-site staff to reboot the modem used in remote site.
Cisco WAN :: 1900 Router With Adsl Wic Won't Connect To Internet
Oct 17, 2011if I have made a simple mistake with my config. It has authenticated ok and been assinged an Internet IP address from the ISP but the clients can not connect ping any internet address nor can the router.
hostname
!boot-start-markerboot-end-marker!!enable secret 5 $1$WGr1$khNrjiwYANhUsIaKEBDsL0enable password 7 121A0C041104!no aaa
[Code].....
Cisco :: 1900 Outgoing Email Doesn't Go Through Router
Jul 8, 2012We have Cisco 1900 Series Integrated Services Routers (has a wired router and a wireless router) and since this morning we can not send emails.I inquired with both the ISP and the hosting provider and all settings are correct.I can receive emails from outside the router, but can't send any emails out.If I try to telnet mail902.opentransfer.com 25 it doesn't connect.Port 25 is the port we were using all the time and was working through the router.I connected my laptop directly to the modem and was able to send emails using port 25, also was able to telnet to outgoing mail server. I didn't change anything in the router.is there a way to "enable" port 25 or "enable" mail.homeserviceclub.com (smtp server) or mail902.opentransfer.com (hosting mail server) if this would solve the problem?I don't understand why is this happening as I never had to enable or disable any email ports or mail server addresses.
View 3 Replies View Related
