What Router Should Be Used With LAN 802 11n Card
Jan 2, 2013New computer has a LAN 802.11n card. What router should I use to interface?
View 3 Replies
ADVERTISEMENT
Dell Wireless 1390 WLAN Mini-Card - Wireless Network Card Error
Apr 20, 2012I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies View RelatedRouter Or Laptop Card?
Jun 14, 2012recently signed up with comcast and everything was working well the first day or so. My download speed has since crashed and burned, getting .3-.5 Mbps down but still normal ~4Mbps upload speed. A wired setup through the router gets ~22Mbps, which is what I'm paying for so it's not an ISP issue. how I can figure out if it's the router's wireless or my laptop's card (no other PC handy) and what I can do to fix it.
[code]...
Using A Router With Verizon Card?
Nov 25, 2011I have not internet in my area ( rural ). I currently use Hughes net ( Poor )I just bought and loaded software for a verzon modem card.How to I hook up a router to the system?
View 2 Replies View RelatedWireless Card Not Connecting To Router
May 8, 2011Wireless card not connecting to router .This is what we have so far
[code]...
This issue seemed to be addressed previously, but wasnt sure if I should create a new thread or reply to the old one.
WLAN Card Not Connecting To Router
Mar 30, 2011Have Dell 6400, run Win XP serv. pack 3. No red X or yellow ! under Device Manager. I did open up laptop, took out WLAN card, restarted laptop, turned off laptop, reinstalled WLAN card, restarted laptop.
[code]...
Why Router Slower Than Modem Card
Sep 8, 2012When I use my USB modem card directly connected to my computer it is much faster than when I connect it via my wireless router.
Why? How do I increase the speed via the router?
Cisco WAN :: How To Add A Wic-2t Card On Router 2800
Dec 21, 2011How to add a wic-2t card on router 2800
Had the card as follows
I want to know routr 2880, such as the following picture
Connect Wifi Router To Data Card?
Feb 19, 2013Is it possible to connect wifi router to data card?
View 1 Replies View RelatedGet The NIC Card Driver For D-link Wireless Router?
Jul 12, 2012how to get my driver back, D-Link wireless router NIC card driver, i formatted it yesterday because of viruses, but since then i cannot have internet unless the driver is fix back
View 1 Replies View RelatedWireless Card Doesn't Find Router
Aug 14, 2012My PC has a wieless card in it and last night the internet went off and then I wouldn't find my router at all, just everyone elses.I tried resetting the router, unplugging it an leaving it for a while, then resetting my PC. Tried unplugging the wireless card and plugging back in. Made sure I have latest drivers. Disabled and enable the card.I then tried plugging in an external belkin adapter in the usb and that worked.There are 2 other PC's in the house and they are both connecting to the internet fine. But I tested an old laptop we have and that didn't pick up the router either.I went on the pc in the other room next to mine and tried changing the channel it was on from 12 to 5 and it actually worked now my pc can find my router (???)But we've been having alot of issues lately with bad internet on certain channels etc.I don't really understand why channel 5 would work but channel 12 doesnt? We are experiencing more latency on that channel too.
View 1 Replies View RelatedWireless USB Network Card To Hardwired Router?
Mar 5, 2011I have a laptop using a wireless Ralink USB card to connect to the internet. Is it possible to use the unoccupied Ethernet cable slot to hardwire into a router and use the router to send out the wireless signal picked up by the USB card to other devices?I know I shared my connection like this to my xbox 360 but wasn't sure if it could be used with a router.
View 1 Replies View RelatedCisco WAN :: VIC 2FXS Card In 2811 Router?
Oct 20, 2011I have a VIC 2Fxs card and it is not getting recognized in the 2811 router. I checked the cisco website and I saw that the FXS card for the 2811 is a VIC2-2FXS. If i were use this, do I insert it in the HWIC port or do I use a Voice 2V module to insert the FXS card and then insert it into the router. Also , is there any other FXS card that can be used apart from the VIC2-2FXS.
View 1 Replies View RelatedCisco WAN :: 2801 Router With Cellular Card
Mar 7, 2011I have a 2801 router with a HWIC-3G-cdma card that I have inherited from a predicessor. How to use a cellular card on a router and need to get this thing up and running. Any example config that I can see or point me in the right dorection to get this up and running? I have the cellular card set up as Cellular0/1/0 on the interface, I assume that that was done by default, and it has an IP address. The Static Route of 0.0.0.0 0.0.0.0 Cellular0/1/0, in the config with only 2 other interfaces as being direct connection. But that is as far as I recognize. Do I need to set up a router protocol? Which one? How do I use the cellular card? Do I need to have an ISP connection?
View 1 Replies View RelatedCisco WAN :: OC3 Card For 7200 Series Router
Sep 12, 2012One of my customer is looking for 1 port OC3 card for 7200 series router. There are two options (PA-POS-2OC3/PA-A6-OC3)However my customer is not sure whether he wants a ATM/POS card.
How to determine whether i should go for ATM or POS Card for OC3. Or atleast what should be my approach to determine whether i should go for ATM or POS Card for OC3.
Cisco WAN :: Setup 887g-w Router With 3G GSM SIM Card?
Jun 23, 2011I'm trying to setup Cisco 887g-w router with 3G GSM SIM card. We got a data sim card from telco with a static IP address. Below is the some outputs. The cellular interface keeps flapping, but am not able to ping at all to any public IP address and it's not connected.
International Mobile Subscriber Identity (IMSI) = 525016180934095
International Mobile Equipment Identity (IMEI) = 353223040059355
Integrated Circuit Card ID (ICCID) = 8965011104140220958
Mobile Subscriber International Subscriber
[code]....
Cabling / Cards :: Wireless N Card To Net-gear G Router
Jan 28, 2011I purchased a computer with a pre-installed wireless card which was stated to be b/g/n compatible. When I go to setup a connection to the wireless network (through a Netgear WGR614 v8 router), it has no problem detecting it with a full five bars. However, when it prompts me to enter the password I do, but immediately afterwords another password box appears prompting me to reenter the password again. After repeatedly doing so, it will eventually say the password is incorrect. I know the it is correct because I've since purchased a Netgear USB adapter for temporary purposes and it connects using the password. I've even accessed the router to ensure the password I was using was correct and it is.
View 2 Replies View RelatedFios Router Connecting To A Netgear Range Max PCI Card?
Jun 26, 2012Im having problems staying connected to my internet. I have Verizon Fios router that is wired into this desktop i also have 2 laptops and now im trying to connect a second desktop wirelessly to the router. My Netgear Rangemax PCI picks up the signal at 68% and connects to the router. But periodically it disconnects from the router and i click connect to a network icon and it shows that i have no wireless internet as if no PCI card is installed so i wait a min then it shows up again and windows network diagnostic kicks in and "resets the network adapter" and all is well for about 15min till it disconnects again.
View 1 Replies View RelatedCisco WAN :: Configure 3G SIM Card For 887G Router Backup?
Jun 23, 2011I have one problem regarding a configuration (or setting up) of 3G SIM card for 887G router backup. That SIM card had a PIN code, so I disabled it, and now I can see that 3G light flashes Blue, so it detects 3G network. Also I can see that modem tries to dial up to connect to network, but with no luck. It has CHAP APN. Also in configuration I've found that there is PPP CHAP username and password, but I don't have any of those. I've tried to configure my SIM card with Username and Password, but it doesn't save. At the moment I have: Cellular 0 is down, line protocol is down. Dialer 2 is up (spoofing), line protocol is up (spoofing).
SIM card status is OK. Network detects O2 - IRL - yes.
It detects the network, but cannot connect to it. I'm not sure how to setup the SIM card or how to unlock it.
Cisco WAN :: 2921 Router Not Detecting EHWIC-1GE-SFP-CU Card
Oct 2, 2011I just got a brand new Cisco 2951 router that has built-in 3 gigabit interfaces cards. We want to add additonal 2 GE EHWIC-1GE-SFP-CU card to it. When it booted up and type show inventory, it did not detect the presence of the card. There was light on at the back of it. I have checked the compatibility on Cisco. The card is compatible with this router. Do we have to install the card with special instructions in order for the router to see it?
View 1 Replies View RelatedCisco WAN :: Adding A HWIC 1FE Card To 2811 Router?
May 19, 2011I have a 2811 router runnning IOS 12.4(21) and have added an HWIC 1FE card to slot 2. But the card doesnot show up in the router and all the three lights on the HWIC card is steady green. I have gone through some cisco documentation and found that i have to upgrade the IOS.
I have few questions before doing the upgrade.
1. Which IOS version should I upgrade to?
2. Will this erase my exisitng running configuration ? I have VPN services, PPPoATM, PBR etc.. all running on this router at present.
3. Presently i have a 128 MB CF card on the router. Will this be enough or do i need to upgrade this card also? Can i choose an IOS which will fit into this card otherwise while keeping all existng features?
4. I want to use the HWIC card for the ISP's internet service through PPPoE. Will this be possible with the upgraded IOS ?
Cisco WAN :: Router 2811 Can't Detect HWIC-2FE Card?
May 10, 2011I am trying to connect HWIC-2FE Card to my Cisco 2811 Router. The router is unable to detect the card. I get the following error message:
' %GT96K_FEWAN-1-UNKNOWN_WIC: NM slot 0, wic card has an unknown id 53BPort Statistics for unclassified packets is not turned on.'
Cisco WAN :: Which Type Of HWIC Card Should Use In 2911-sec / K9 Router
Feb 14, 2012I have cisco 2611 + NM1E , and i want to trade in for a cisco 2911 security router + HWIC4 Card.Which type of HWIC card should i use in the cisco2911-sec/k9 router?
View 1 Replies View RelatedCisco WAN :: Install VWIC2 Card Into 3825 Router
May 29, 2011We have a cisco 3825 router with OS version 12.4 and one VWIC2-2MFT-T1/E1 card at Slot 0. Now I have to add one more card of the same type in the router.
I need to know the steps or process to add the the 2nd card in the router.
Cisco WAN :: 1721 Router With Ethernet Interface Card
Feb 25, 2011I have cisco 1721 router so I installed an ethernet interface card so when I make show run I found that there is a fast ethernet 0 and ethernet 0 (which I installed) so i wand to make subinfaces of the etheernet 0 but I can't. I tried to make encapsulation dot.1q but it doesn't accept it.
Is Ethernet0 supported to generate subinterfaces?
Will A 300mbps Wireless Card Slow Down A 450mbps Router / Network
Apr 10, 2012I recently bought a router with 300+450mbps dual-band connectivity. I have a computer and am looking into buying a wireless n adapter. Should I buy a 450mbps-capable card? They cost much more than 300mbps cards and I'm not sure if the price difference is justifiable if current devices won't saturate all of the bandwith. Also, will a 300mbps card slow a 450mbps network down to "only" 300mbps?
View 2 Replies View RelatedBest Wireless Network Card For Cisco Linksys E3000 Router?
Mar 3, 2013My wireless router is a cisco linksys e3000, and I was wondering what the best wireless desktop card would be?
[code]...
Dlink Router To Windows XP Computer With Realtek Wireless Card?
Dec 21, 2012trying to connect an old PC to my home wireless network.I brought home a PC I have used for years at my office. I have it configured with a Realtek wireless card and was able to connect it to my office wireless network without a problem.But, when I try to set it up at home, it won't take. I have a dlink router that is working fine with several Mac computers in my home, so I know the router and network are up and running fine.The PC uses Windows XP. The icon in the lower right corner says dlink is connected and there is strong signal strength. However, when I check the dlink status, it shows that 2,573 "packets" are sent, while "0" are received.I've tried to connect to the internet using Mozilla, Safari, and Explorer. Each says the server cannot be found and that the internet is not connected.
View 5 Replies View RelatedLinksys Wired Router :: Unsupported Gigabit Lan Card For E4200?
Sep 10, 2011I'm currently using onboard lan card of P6X58D Premium. However in the Cisco web setup page or even in my Windows 7, it shows only 100Mbps connection. I tried to force to 1000Mbps but it failed to get an IP. I did a google and found that may be the router doesn't do well with Intel card, but I use another onboard lan card with Nivida chip+AMD CPU, it's still only have 100Mbps. What can I do to have a 1000Mbps connection?
View 5 Replies View RelatedLinksys Wireless Router :: WMP600N PCI Card Connecting To WRT610N
Aug 30, 2011I have a WMP600N PCI card connecting to a WRT610N router. I get a weaker signal when I connect to the N band (5Ghz) than the G band (2,8Ghz). Why is that? How should I set up my router/PCI card to get the maximum performance?
View 9 Replies View RelatedCisco WAN :: Loading Configuration From Flash Card In 2811 Router?
Jun 6, 2011have remote routers boot and load a config from the flash card. It seems this is possible if the Flash Class is A, according to the Cisco web site using the
boot config flash:<Config file>
where <Config file> is the file on the flash.
Although this can be applied on 2811 routers, they fail to load the file on the flash card. I've since found that this router type has a Class C flash. So the question is, can either:
Is there a similar process for other classes of Flash cards, specifically Class C?
or
The router flash be set as a Class A to support this functionality,
The preferred resolution for this would be the first as there are many remote routers installed a diverse and difficult locations to visit, should a format/rebuild of the flash fail for some reason.
don't ask to list the output of a show boot or show bootvar, neither of these commands work. The Startup/Running config lists the boot config line.
Cisco Infrastructure :: Connect Two Router With One HWIC-4ESW Card?
Sep 2, 2011How Can I connect two router with one HWIC-4ESW card , I have Problem with this because when I tried to do , I received the message I can´t configure IP address on L2. The idea is to connect two routers with /30.
View 2 Replies View RelatedCisco WAN :: 1841 Router - Can't View WIC-1DSU-T1-V2 Card To Troubleshoot
Jul 13, 2011I recently installed a WIC 1DSU-T1-V2 card into a 1841 router to add to a multilink bundle. I inserted it in Slot 1 and powered up the router and there was a new serial interface showing in the config automatically as s0/1/0. I was able to get it setup with ppp multilink and added to the multilink group. The problem is I need to do a sh controller or sh service-module to see if there are errors happening (I'm using this card as a replacement for an interface that was giving errors with this line before). I can do a sh s0/1/0 and that works but I can't see deeper. I found it odd that the serial port just appeared in the config when I booted without having to do anything, if this is correct behavior and how I see the Controller or CSU info for troubleshooting?
View 1 Replies View Related