Routers / Switches :: How To Open The Tp-link Interface Setup
Aug 16, 2012how to open the tp-link interface setup for my TD-W896ON? i have a user and a password but where do i add them ??
View 1 Replies
ADVERTISEMENT
Cisco Routers :: WGR614v10 - Can't Open 192.168.1.1 During Setup
Sep 18, 2012I am replacing a Netgear wireless router (WGR614v10) with a Cisco WRVS4400N. When I go to set up the device on my Mac, 192.168.1.1 will not open in a browser. Do I have to do the setup on a PC?
View 2 Replies View RelatedRouters / Switches :: How Do FPS's Open UDP Ports
Nov 29, 2011How do FPS's open UDP ports without needing to configure the router to forward them?I never have to forward ports from my router to my PC. Every game i have somehow manages to open the UDP ports it needs without me having to configure my router. Yet when i check to see if those ports are open (prior to starting the programs) they always come back as blocked or closed. Now I'm currently working on a UDP Internet program and need to know how to do the same thing - open ports on a router without having to make the customer configure their routers. I'm THINKING that other programs start with a TCP/IP connection on the desired port and that opens the UDP port. Is this the answer or is there another method used?
View 5 Replies View RelatedRouters / Switches :: How To Open Three Ports
Jun 25, 2011to access VOD database i must open three ports on the router - not sure how to
View 3 Replies View RelatedRouters / Switches :: Cannot Open Router Settings
Feb 22, 2011I cannot open router settings... I had recently opened some ports on my router. However today I tried to access the settings and all it does is a web search for the gateway (192.168.1.254). The internet is working. I reset the router and it did not work. I cannot do a hard reset because I will lose all my settings for my company's settings. Also the router is a Netopia modem/router
View 2 Replies View RelatedRouters / Switches :: Why Is Port Forwarding Not Open
Dec 25, 2011When checking my port forwarding, it says that it is not open.
View 2 Replies View RelatedRouters / Switches :: Unable To Find Open Port
Feb 7, 2011I have just upgraded my AIM and Skype messengers and now it won't let me sign in. I did before with my old versions. It is saying that my internet connection is bad which it is not. I have looked up ports in my Yahoo messengers, Control Panel and Bit Torrent still nothing.
View 6 Replies View RelatedRouters / Switches :: Open A Port On A Motorola Modem?
Aug 26, 2011how do i open a port on Motorola modem
View 1 Replies View RelatedRouters / Switches :: When Checking Port Forwarding - It Says Not Open
May 23, 2012When checking my port forwarding, it says that it is not open. Why?
View 6 Replies View RelatedRouters / Switches :: Setup An Home Network With A Wireless Router And Use Multiple Switches?
Jan 29, 2011I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies View RelatedRouters / Switches :: Cannot Open Beetel Adsl2 Router Config Page
Nov 18, 2012I cannot open the config page of beetel adsl2 router using 192.168.1.1I have connected my laptop to router via Lan cable. Now when I give the ipconfig, I get some random IP and does not get the default gateway: Autoconfiguration IPv4 Address. . : 169.254.129.188 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . :I cannot ping 192.168.1.1 nor 169.254.129.1 thus the web page of router cannot be opened.This all happened after I reset my router.
View 3 Replies View RelatedRouters / Switches :: Thomson Technicolor 587nV3 - Change NAT Status From Strict To Open?
Aug 10, 2011I'm using a Thomson Technicolor 587nV3. I need to change my NAT status from strict to open. So I can play MW3 online and connect to my friends online games and so I can host multiplayer matches. I have windows 7 laptop to do any of the steps required. I've tried to bind my routers cone through Winscript but without any luck perhaps I done it wrong
View 5 Replies View RelatedRouters / Switches :: LAN Setup For 3 Different Office Locations?
Jun 28, 2011I have 3 different office location and I need to set up a LAN so that all three are connected and can share info?
View 1 Replies View RelatedRouters / Switches :: Setup Multiple Public IP's?
Apr 7, 2011At my company, we lease 3 static public IP addresses from 1 ISP. We want to have 3 separate networks that each use one of the IP addresses. Network 1 is the computer network, network 2 is the VOIP network, and network 3 is the security camera network. I am trying to determine the best way to do this. I have come up with 2 solutions in my head, but I'm not sure if they will work or not. I would like to get some input. Solution 1:Solution 1 looks something like this. Fiber box -> Router-> 3 switches. There would be one WAN input on the router, that would have a static route to 3 different LAN ports. For example, address 24.244.208.101 would be assigned to LAN port 1, 24.244.208.102 would be assigned to LAN port 2, and 24.244.208.103 would be assigned to LAN port 3 (by assigned, I mean have a static route to it). Is there some type of router that is capable of doing this? Solution 2:Solution 2 looks something like this. Fiber box -> Switch -> 3 Routers. The ethernet cable would run from the Fiber Box to a switch, and then 3 routers would be plugged into the switch. Each router would have the Static information configured in them. Would both of these methods work? If so, which would be the best way to go?
View 2 Replies View RelatedRouters / Switches :: How To Setup Cisco 2900
Feb 17, 2011We are in the process of switching to a new internet provider in our office and have run into some problems. Our old setup was with AT&T, where they provided a managed router which linked to our internal switch and also provided NAT to the internal IP of our email server.Our new setup right now is just the internet coming in through a cable connected to a switch, we were told we needed to provide our own router. Someone donated a Cisco 2900.What should our proper set-up be? Should the internet come in directly to the router and then to our switch, or should it go to the switch they provided, then the router, and then our switch?Also, there seems to be some confusion about whether or not we need anything else to get the internet to work. There are slots for network cards in the router. Does it come with at least one built in we can use, or do we need to provide one?
View 1 Replies View RelatedRouters / Switches :: Did A Recovery And IE6 Page Won't Setup
Mar 13, 2011I did RECOVERY on my computer. Its a Compac Windows XP Home edition. This computer runs off of my main computer by a router & adapter. My router & adaptor are showing green but the Internet is showing red. Its becuz my high speed Internat service is ATT.my.yahoo.com. which comes through IE. On my newer computer all is fine. My IE works good & all is working. but my IE on my older one which runs with the router wont set up.
View 1 Replies View RelatedRouters / Switches :: How To Setup A LAN Connection Properly
Jul 1, 2011I Have a Computer Ready for setup as a Server in the LAN Connection:
Windows 7 Professional.
Another 2 Computers for LAN Connection:
1st Computer is a Windows 7 Professional (Connect as LAN)
2nd Computer is also Windows 7 Professional (Must connect using a Wifi D-Link)
Another 2 Computer for LAN Connection:
Windows XP: Must Connect Using LAN port.
1 Computer:
Windows 7 Home Edition: Must Connect Using LAN port
2 Laptops:
1st Laptop is using Windows 7 Ultimate.
2nd Laptop is a Vista.
How to Connect these Computers to the above mentioned computer ready for setup as as Server?
Routers / Switches :: Networking Setup With DLink DL-604
Apr 8, 2011I had this small internet cafe with 15 units pc. and browsing the web is not that stable. i have to unplug the internet modem everytime i can't connect to the internet.I think it has something to do with the settings that was in the router since it was just configured by a tech guy which i think not 100% sure of what he did, though it can connect to net for sometime but most of the time it is down.
View 5 Replies View RelatedRouters / Switches :: Basic Networking Setup For More Than 40 PCs
Jul 23, 2011How to set up more than 40 pc's with out internet connection using linksys switch.
View 3 Replies View RelatedRouters / Switches :: Manage Static IPS In VOIP Setup?
Jul 21, 2011I have VOIP and was provided a modem, a Tilgen Router (Vood 452_A). I also currently have a Linksys WRT54G router. I also have a home surveillance system with a DVR that can be accessed via the net. I am trying to allow the ports to open so that traffic can navigate down to the DVR.My IPs:My VOIP has provided me with 6 static IP addresses. For sake of this issue they are:
67.xx.xxx.153, through .158My subnetmask is set to:
255.255.255.248My Settings:
The Modem is connected to world. To the modem I have the Tilgen Router connected. The Tilgen is set with an ip of .153 and the subnetmask listed above. DHCP is turned on and has IP range set for .154-.158. It is set in Bridge Mode with NAT and Firewall turned off. To that I have the WRTG54G router connected and assigned the router an Static IP of .154.. The cable is going into the Linksys WAN port.From a computer connected to a LAN port on the WRT54G, I see my public IP as .154, currently my internal IP is 192.168.1.15 so I believe I have to assign one of my Static IPs to this PC, however when I try to connect to the Linksys Router (.154) from the outside web, I am get a time out error. (also from a ping test.) My thoughts are to assign the Linksys to DHCP and use a range of .155-.158 to give each lan item a static IP. My question is will this work? Will each item in the network have its own IP and if I forward the port to the DVR that i needed, ie 80 for web client or 6100 for desktop client, will that forward through?Or do I set it to Router Mode and use the Tilgen to assign the ips.
On the Tilgen I also have an option for a DHCP relay or to turn off DHCP.
For clarification here is the setup chain
Broadband/DSL Line>>Tilgen Modem>>(LANPort1)Tilgen Router(LAN Port2)>>(WAN) Linksys(LANPort1)>>DVR/Computers
Found this walkthrough on setting the WRT54G into a Switch. If I did this, in theory the VOOD would assign those computers/dvr connected downstream via the WRT54G a static ip from my range set on the router. Then in theory I would not need to port forward port 80 since the DVR would be on its own public IP.?
Routers / Switches :: Temporary Lab Setup 1 Network Port 8 PC's
Mar 21, 2011We recently moved 8 pc's from a room where they each had port on the switch to a room where there is only one port for all of them. I setup a DLINK DIR632 Router in there and they connect thru the one port thru the switch to the gateway which gets them out to the internet.The problems is I need to be able to remote desktop into these 8 PC's and I need them to be able to print to the network printer. I am using a Linksys WRT54G Broadband router as the gateway connecting the switch to the internet. The DLINK's dhcp server is on for the 8 PC's. The Linksys' dhcp server shows the DLINK as IP 192.168.1.19 on the network.I know I have to use advanced routing settings but I'm not sure about how what to make the subnet mask and IP's on both routers. I believe I need to turn off the dhcp server on the DLINK and have the Linksys' dhcp server serve all of the PC's but I'm not sure if thats the best way or if its possible.. I don't want to hack out fix only to find it breaks 3 days later.I used to do this stuff all day long in the 90's but its been a while and to me its like calculus.
View 13 Replies View RelatedRouters / Switches :: Vlan Setup On 2848 Switch?
Jul 25, 2012I have a dell powerconnect 2848 switch and setting up a vlan 3 an make port 1 mngt, port 48 uplink to layer 3 switch and tag vlan 1 and 3 to port 48 with cli commands for this setup. and also to untag ports 2-10 for computers
View 1 Replies View RelatedCisco Switches :: SG200-18 Link Aggregation Setup
Jun 22, 2012I have a Synology 1512+ and trying to setup Link Aggregation but no success. I have configured LAG Management with LACP enable or disable but still failed.
At the Synology 1512+ setting page, there are 2 options: IEEE 802.3ad Dynamic Link Aggregation and Network Fault Tolerance (Non-802.3ad network enirovement), I selected IEEE802.3ad, which i think S200-18 should be able to support. right?
Routers / Switches :: Can Setup A Staticip Address On A Wireless Computer
Aug 28, 2012I want to setup a static ip address for a h.264 network dvr ,however my desktop computer is out of order, that is connected direct to router,is it possible to use my wireless laptop to setup the router,or will I have to connect the eithernet cable to the laptop.
View 4 Replies View RelatedRouters / Switches :: Linksys E1000 Wifi N Router Setup Without Cd?
Apr 19, 2011The router was working fine when it was setup but was disconnected for a short while. There is now no recognition of the router and the install cd was misplaced...
View 2 Replies View RelatedRouters / Switches :: Setup DMZ By Using Home Router To Prevent Attack?
May 5, 2011Currently in my office have a TPlink wireless router (WR1043N), and Dlink 615 router.Below is my office's network organization.Internet-->TPLinkRouter(192.168.2.0)-->DlinkRouter(192.168.0.0)We want to host a demo website but we are afraid our network being attacked. So we wish to implement a DMZ network to hide our internal network from outside. My question is can i setup a dmz network with the above capabilities by using home routers?
View 5 Replies View RelatedRouters / Switches :: Unable To Configure The Setup On A Hawking 300 N Router
Mar 17, 2012I have a Hawking 300N and I have misplaced my disk and I neing walked through this to have it set back up. I hooked it all up correctly and it says no internet connection
View 1 Replies View RelatedRouters / Switches :: Setup A Vlan To Access Internet Not Network?
Nov 7, 2011I have a Dell switch setup with 2 Vlan's. Vlan 1 is to the network. Vlan 20 is going to be for wireless access to the internet. How do I configure the switch/router so that Vlan 20 only connects to the internet and not the network? I will later want to have a 2nd SSID that I want to connect to both the internet and network.
View 5 Replies View RelatedRouters / Switches :: Wireless Network Setup - Configuring Linksys Router
Sep 18, 2011I am following instructions I found to set up my wirelss network, but am having trouble configuring my router. I'm specifically at a standstill, because I can't connect to http://192.168.1.1. I pinged the router and got a response and went to run/ip config to confirm I have the right URL for the router, but still not able to get to the URL.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: 3750 / Get RADIUS Setup For Authentication To Switches And Routers?
Sep 19, 2012We are setting up a new office and I am trying to get RADIUS setup for authentication to my switches and routers. Currently I am working on a 3750 running IOS 15 and getting hung on what I think on something small. I have attached my Microsoft NPS Network Policy. Below is my IOS config:
aaa group server radius corp-radius
server 10.15.10.20 auth-port 1812 acct-port 1813
!
aaa authentication login default group corp-radius local
aaa authentication login radius-localfallback group corp-radius enable
aaa authorization exec default group radius
[code]....
Routers / Switches :: D-Link And Linksys Routers Plus Modem Connection
May 26, 2011everything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.
View 1 Replies View RelatedRouters / Switches :: Dlink Model DI-624 / Arris TM502GI Modem Setup - Connecting Cables?
Feb 6, 2013My router is a Dlink Model DI-624
My modem is an Arris Model TM502GI don't remember how to set it up. That is what cable goes where & is there anything to do on the PC With WiFi for it to connect with my router?I am 70 years old with a limited knowledge of computer and other electronic gadgets.
Cisco Routers :: SRP527W Has No Link In Web Interface To Update Firmware?
Jan 3, 2013My SRP527W has never had its firmware upgraded since purchase. I had a need to do this recently, but could not find the section under Administration for Firmware upgrade.The only two items under Administration are Time Setup and Switch Setting.I've tried different browsers, to make sure that was not an issue, with no success. Any direct URL to the modem web interface that might allow me to update the firmware. url...Otherwise is there another method using a USB stick or tftp or similar?
View 1 Replies View Related
