I can't choose any devices when I try to launch a NetConfig Job in LMS 3.2.
I have to check in the job summary if the device on which I'll apply the job is the good one.
Unfortunately, this problem doesn't appear every time so I don't know where to look for an answer.
After upgrading to LMS3.2.1 I cant select devices in Netconfig. There seams to be a defect in the selection box:you have Task selection twice (left task-selector headlined with Device Selector) instead of device-selector left and task-select right.What can we do to can use netConfig?
View 1 Replies View RelatedI purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies View RelatedI'm running LMS3.2 and RME 4.3.1. I deployed a netconfig job to our network which consisted of approximately 800 devices.The report said that the job completed successfully however some of the devices didn't save thier running config to startup.
Is it possible to add a command or issue another netconfig job just to save the running config, so I can identify if the job fails on some devices? Using the tick box in the netconfig job doesn't seem to alert you if its not successful.
I have upgraded our LMS 3.x to the new LMS 4.x Version. have installed the new 4.x on an new server and importet the backup.
I have importet a Certificate and have enabled the Browser-Server Security Mode, Enabled I added some new Netshow Jobs which run every day.
I get the email from the jobs and the URL in the email but, URL
When i click on the link i only get:
Forbidden: You don't have permission to access /rme/NSViewJobResults.do on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
i must change the link to Urls there anywhere an option to edit the text which is send with the jobs, to fix the url?
I am getting some weir behaviour in my LMS 4.2 setup. I am doing and Archiveupdate job and am receiving a partial success for roughly 1400 devices. Here is some output.
Execution Result:
STARTUP
CM0057 PRIMARY STARTUP Config fetch SUCCESS, archival failed for
xxxxxx Cause: CM0210 Unable to generate
processed config Action: Verify that archive exists for device.
RUNNING
[code]...
I went on and checked the dcmaservice log file.I found the following entry at the same time of this particulair job
ERROR,[Thread-72920],com.cisco.nm.xms.xdi.pkgs.SharedDcmaIOS.analyzer.IOSConfigletRules,loadRules,42,Could not locate configlet rule file : com/cisco/nm/xms/xdi/pkgs/SharedDcmaIOS/analyzer/IOSConfigletRules.ser
[ date taken out ],ERROR,[Thread-72920],com.cisco.nm.rmeng.dcma.configmanager.DeviceArchiveManager,archiveNewVersionIfNeeded,1115,CM0210 Unable to generate processed config
I then searched if I had the IOSConfigletRules.set file on the box. And no it is not there. My question is this the reasson that I have som manny partial sucess archive results?
have some problems with setting up jobs for the backup running config on my switches. Have RW and RO contact with everyone and can change the config in editor, but do not get config.txt
View 1 Replies View RelatedI have added manually the cisco asa 5520 to lms 4.2 , because automatically the lms didn't discover it ,however when i tried to open the device using cisco.MessageCannot find applicable device package for 192.168.100.100This error could be due to one of the following:- The device package for this device type is not installed.- Device support for this device type is not available.- You are trying to open a component inside a device.To correct the problem, either install a device package for the device type, or open the parent device to manage the component.
View 1 Replies View RelatedI have a trouble with Cisco view 6.1.8. I had update offline device package because i don't have internet . When i connect to switch router 3945 and switch 3750, router 2911 on Cisco view then I receive "cannot find applicable device package for 10.1.241.10". Need to reinstall device package. The version of Cisco work LMS is 3.2. I check Active log and receive message .
The Package(s) Selected for Install :
Cat2960, Cat3750, Rtr2900, Rtr3900, Rtr7000
WARNING : Cat3750(14.0):Consistency check failed for base package DtShare
WARNING : Rtr3900(5.1):Consistency check failed for base package NGMARShare
I have a new ACS 5.3 configure and a ASA5550 to authenticate VPN users using a remote LDAP server. Once I try to authenticate the users with the ACS it gives me the error message "22056 Subject not found in the applicable identity store(s)."
I checked out the documentation and have already configure the Identity store sequences to redirect everything to the LDAP server, I also did the Bind test and it says that is ok, but I still have the same problem.
I validated the Access Policies Menu, and tried to create a new Service Selection Rules, but whet I get to the option of modifying the Identity option I get the error: "This System Failure occurred: {0}. Your changes have not been saved.Click OK to return to the list page. " and I'm not able to modify the identity, not in this new option I created, nor in the ones already created in the ACS.
I have two ACS v 5.2 (primary and secundary) and some users are in the internal stor and the others are in the AD.The local site topology is like this:
PC - AP - WLC - ACS - AD
Authentication method is PEAP(EAP-MSCHAPv2) and all user have the certificate company installed. The OS in the client users is Windows 7.Users was working fine but some users reports intranet disconnections. I see in the ACS log many "22056 Subject not found in the applicable identity store(s)." and "24415 User authentication against Active Directory failed since user's account is locked out" alarms.I believed it was because user wasn´t in the AD data base, but some times the same user is authenticated successfull and other i see the "22056...." or "24415...." alarms.
I switched the role for ACS primary to works as secundary and we see the same alarms.
Not able to see devices in CS device management (0 devices).but devices are visible in other modules like RME and DFM.
View 3 Replies View RelatedSetup CE500-24TT switch Port
FE2 router / ports
FE1,3-24 desktop / Ports
GE1-2 Switch ports - MAC filtering is NOT enabled.
8 Port G Switch = SBS2008 / Win2003 with Citrix / Win2K8 Management Server - plus a couple of desktops for Gig to server access.
I connected on the 8 port Gig SW a new Server running Windows 2012 Hyper-V and am not able to ping the PIX - I disabled the firewall and made sure the network location of the HV server is set properly. From the PIX if I try to ping the HV server it fails but I can do a sh arp and the MAC address of the HV server is there. I can ping the HV server from any other device connected to the Gig SW. I can not ping the CE500 from the HV server but I do see the HV server MAC address in the MAC table of the CE500 SW. I tried plugging the HV server into G1 on the CE500 and same thing - the MAC shows up on the correct port but no traffic seems to pass. I have had issues with this switch in the past where a printer would not communicate between the Gig ports and the FE ports - I moved the printer to the Gig switch and made all the users print via print server and forgot about it.
My internet comes to D-link 655 wireless router from there I have wired connection, one of the connection goes to a switch from this switch I connect wired devices in my office.Another connection from D-link 655 router goes to another wireless router in my living room which is a Linksys router. My few devices and a laptop connects to this router.My problem is I am not able to see the devices connected to my Linksys router from my office devices
View 2 Replies View RelatedW7. Internet connection is through BT Home Hub2 and is hardwired. No problem at all. But my wireless connected BT internet radio and my wife's Kindle can no longer connect to the internet. The radio says connecting to network but does nothing. I have changed nothing I am aware of. I have looked at the BT Home Hub Wireless set up page and the settings are Using WPA and WPA2 and the correct wireless encryption key is there. Channel selection is automatic. I have changed that to 3 other suggested channels, no result. Frankly it is all Greek to me and I do not know what I am looking at. how I reconnect the Kindle by wireless and the internet radio? (I know I can use a USB to connect the Kindle, but not the radio).
View 1 Replies View RelatedI have looked through some posts on here of other people having the same trouble, I tried doing the different things suggested and it still is not working.Laptops/desktops can connect to the open SSID perfect, but anything portable such as iPads, Kindles, Phones etc.do not ever get an IP.I'm remotely troubleshooting this issue for a customer and have SSH ability.
View 9 Replies View RelatedI cannot connect to the WiFi router, an all-in-one modem+router provided by my ISP. Now, I run an Ethernet cord from the router to my computer: the computer works just fine. As of a day ago, though, none of the home's Apple devices will connect to the network, despite reboots, password retypes, and shouting at them. Each device (two phones and an ipad) can identify my network, but they cannot join. Additionally, there is an old laptop that cannot connect anymore.
View 7 Replies View RelatedSony Vaio laptop model pcg-71314L - unable to connect to wireless devices - after many attempts at fixing - decided to upgrade to Win 7 Pro. Once loaded, there are no drivers/devices/controllers listed for networking
View 1 Replies View RelatedI'm running Windows 7 on my desktop, and I've had problems since yesterday with my pc. My Vista notebook, ipad3, ipod touch, android based phone and blackberry are all able to connect to the wifi, but my desktop is unable to connect to the wifi or ethernet. Things were working fine until yesterday, when I had to power cycle, after which the desktop connection stopped, though other devices are working fine. My ipconfig details are as follows:
Windows IP Configuration Host Name . . . . . . . . . . . . : DELL-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : reliancebroadband.co.in
[code]...
I was using the Internet fine lastnight switched on my acer laptop this morning and wasnt connected to the router. I tried connecting but it just fails. I'm still able to connect with my iPad and iPod. I tried uninstalling and reinstalling the network adapter however this fails to successfully install. I've searched for hours but can't find a solution. I'm also unable to reset the router etc because I live in china and the router is in a roommates room whose door is locked.
View 2 Replies View RelatedI can get regarding using the Collobos Fingerprint software through my WRT150N router. I'm using Windows XP SP3 and immediatly after installing (which went extreamy well) it immediatly found and listed all of my home network printers. All of the wired and wireless windows based systems in my house can see and print to the printers without any problem. However, getting ANY of my apple devices (iPad, iPhone etc ) to print will not even show them as listed on the device when I select print on the devices. Collobos says that I have to make sure that Ports UDP 5353 doe Bonjour and TCP 6361 for FingerPrint need to be open both ways for it to work, I have no problem getting into the router settings and have set them up as stated above in Port Range Triggering and enabled. Also made sure Filter Multicast was not check marked in Security. Unfortunatly, that doesn't seem to work as I had hoped.
View 3 Replies View RelatedI have several devices connected to my EA4500 (two wired computers, two wireless laptops, iPhone, iPad, and a network drive). i have not been able to connect any new devices wirelessly. New laptops, PS3, friends laptops. Error message would suggest that password is being entered incorrectly, but I change the password to very basic word (idiot proof) but no luck.
View 9 Replies View RelatedWe have Cable DSL modem that connects to router. One wired connection from router to PC. Wireless devices are 2 iphones 2 ipads and 2 imacs. Constantly having to power the WRT120N off and back on to regain connectivity.
View 2 Replies View RelatedSetup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.
I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).
What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?
I just switched to the EA4500 Router and I'm now unable to remotely access my camera devices. I have done the port forward. I can access the cameras from my local LAN both when using the local 10. ..and external 99 .. Addresses. When I go off the local connection - Access does not work. Slingbox did its auto configuration and I can access it. I just cant get to camera devices (Panosonic, Foscam, etc.).
View 3 Replies View RelatedI have a WRT610N which does not allow me to connect any new devices to the wireless network. This is a recent problem as I have been able to connect new devices before. Devices on the wireless network, those that have been on the network, are able to disconnect and reconnect. Just new devices are excluded. Have gone through the admin screens to see if something is amiss but can not find anything.
View 5 Replies View RelatedI have N600 HD Wireless dual band N Router. have successfully installed the router on wireless mode, however I have the following problem in accessing the storage devices connected to the Router.I can see the storage devices connected to the Router in the "Belkin USB Print and Storage center", but when I double click to browse the devices, it does not open up.
View 1 Replies View RelatedI have a WRT610 and am unable to connect any devices wirelessly. All the lights on the right hand side of the router are on except for the USB connection....what am I doing wrong? The router has worked for about a year flawlessly and last night all wireless connections quit.
View 9 Replies View RelatedI cant see in my network the devices connected to SE2500 just the SE2500 itself. The internet access of the devices connected to SE2500 is working correctly. Is this a problem?
View 3 Replies View RelatedI have 2 computers running Slackware 13.37 and each has a T10/100 ethernet card/port. I want to create an ethernet network between them to pass text and possibly backup. I have given them 192.168.2.1 and 192.168.2.2. I want to be able to cut the connection at will. If I recall correctly there are 2 types of LANs one is NFS and NIS. Which would be the best for this purpose and where can I find a stepwise approach to setting it up?
View 1 Replies View RelatedDo the 1131AG APs support band select from a 4400 WLC running version 7?
View 2 Replies View RelatedI recently purchased a RV120W router and I am having a problem selecting n speed under the wireless settings.
If I select B/G/N-Mixed mode then when I go to save the change I get B/G/N-Mixed B/G/N-Mixed in red letters and it does not save. If I select N only then when I go to save it says in red letters N only N only.
It does not matter if I pick 20 only or 20/40. It does not matter if I enable or disable U-APSD. It does not matter if I use the LSB or USB side.
Firmware Version:1.0.3.10 :When I got the router it had an older firmware if I remember correctly, and it would let me change to n speed.
i have a Cisco 2801 router which is running ssl vpn, previously my ssl vpn is working, but when i reset the config to factory default and restore the working config, then i experienced this problem;
Here is my crypto config, here is the error:
CRYPT O_PKI: Can not select private key (key name)
webvpn gateway web vpn-gateway host name sslvpngtwy01 ssl trust point key name in service.