Cisco Wireless :: W881 Airplay Lags Via Wireless?
Apr 8, 2013
I have a problem running Airplay through the wireless on my W881. It runs okay if the computer i run it from, does nothing else, but if i try to do light browsing or anything like that it starts to fall out and lag. Its like it is not prioritizing the stream at all.
My setup is a w881 running as edge router and i got an Airport express running through a 2950 switch. Airplay runs perfect if i run it through the Airport express or my previous Edge router (Linksys WRT54g). Ofcourse it also runs perfect through the wired network. I shut down all other wireless networks but my w881, because i only want one wireless. And no i dont want to run wireless on the Airport express.
i played around with the Dot11Radio0 interface setting "packet retries 128 drop-packet" and the packet "max-retries". I thought that maybe if i set max-retries to something low, it wouldnt fall out if it has some problems with one packet, it would just continue...
View 0 Replies
ADVERTISEMENT
May 13, 2011
I have the Dlink DIR-655, Rev-A, HW 1.35NA Wireless Router Before you ask, I have reset the router to factory defaults, and reinstalled the latest firmware twice, most recently after trying everything else I could think of.I have Cable internet, ALWAYS using wireless, NEVER using wired except for the router installs, which worked just fine until I switched from my old D-Link router to this 655 one a few weeks ago.Now, very frequently, I will open ANY webpage, and the internet will lag, 5, sometimes 10 or 15 seconds and then suddenly it will work properly for a while... only to happen again a little while later - completely randomly it seems.I wired the router to the computer to check to see if the lagging still happened, and everything was fine.I am using a 1-year old Dell laptop, using Windows 7 Home Premium, 64 Bit, and the Network Adapter is Intel WIFI Link 5300 AGN with the most up to date driver confirmed. Under the Advanced Tab for the Laptop's Network Adapter, the settings are as follows:
802.11n CHannel Width for band 2.4 - Value: 20MHz Only
802.11n CHannel Width for band 2.4 - Value: Auto
802.11n Mode - Value: Enabled
There are a number of other settings which I am confident are not relevant, but happy to provide The last setting is: Wireless Mode - Value: 6. 802.11a/b/g In the DLink Configuration, the relevant settings are:
802.11 Mode: Mixed 802.11N and 802.11G
Wireless Channel is on 10, so as not to use the most common "11"
Channel Width Auto 20/40MHz
DNS Relay Enabled
DHCP Server Enabled
Range: 192.168.0.100 to 192.168.0.199
[code].....
Under WAN, the Primary DNS Server numbers are showing and the Secondary DNS Server numbers are showing as 0.0.0.0 McAffee Anti-Virus is up to date and shows no viruses, nor to the Dlink Logs - McAffee Firewall is turned off, Enable SPI in Dlink Settings is turned on.this problem only occurred when I switched routers recently, the old DlInk router I had never had this issue. And I am using a completely different network name with this new router to avoid any conflicts there. And this problem does NOT occur when hardwiring the laptop to the router directly, it only happens via wireless.Storage of the router is fine, it is in the same spot as the old router was, not to hot, not too cold, it didn't eat any metal for breakfast and there are no MRI machines within 10 miles.
View 2 Replies
View Related
Jul 19, 2011
I know Airplay isn't meant to be done across vlans, but surely it should work with things on the same vlan.The 541N's are clustered and have WDS enabled. The wireless VAP's are on the same VLAN, and intervlan routing works. Airplay works if the iDevice and the Apple TV are connected to the same access point, but not across the network.
View 1 Replies
View Related
Sep 30, 2012
I am currently switching out our Cisco 1130 APs and Cisco Small Bussiness APs for Cisco 1142Ns (I will NOT be using a WLC),
I have setup the AP, and read about some issues with Multicast and Apple Bon. Services.
I ran the "no ip igmp snooping" command and it allowed be to access our AirPlay Devices (Apple TV, AirPort Express, Etc), however our 2 AirPrint devices (Xerox 6125N, & Canon IR3220 via AirPrint Activator) are not showing up at all when connected to the 1142 (they work everywhere else).
Everything is on the same subnet, and 1142 is connected to the same switch has the airprint devices, and one Apple TV.
Both our 3500 Series switches are connected via fiber, AP and AirPrint/AirPlay devices are in the same VLAN.
View 10 Replies
View Related
Jan 2, 2012
I am having a trouble with using iTunes, iPhones and iPads on our Wireless LAN. We have the 2112 WLC and 10 1142N WAPs. If I do a network scan, I can see the Apple TV and see that port 5353 is open, which is Apple's Bonjour service. However, if I try to play music/video in iTunes, or on an iPhone/iPad, I do not see the Airplay icon. If I plug into the LAN, the Airplay icon appears immediately. I have created an allow all rule in the ACL but still no dice.
View 26 Replies
View Related
Oct 16, 2012
I have a Cisco Wlc 4402 , denon 3312 & AP 1142 all three devices are same subnet . But Airpaly not showing in Iphone. But if i put a Airport express in on these subnet then i find airplay option. How without Airport express i can enable airplay...
View 2 Replies
View Related
Dec 6, 2011
I've got 3 WLC 4402 controllers and the wireless is working perfectly except for 1 issue. We are trying to connect an apple tv, so we can stream picture, videos etc from ipads and Macbooks to a large display for media teaching.The setup works at home, but not at work.The apple TV is on the same network as the wireless apple devices, (we use a 10.6.4.x-10.6.5.254 range), both are dhcping the addresses (have tried fixing but that made no difference). I've enabled multicasting and igmp snooping and set the multicast address as 239.0.0.0 and it still doesn't work.
View 11 Replies
View Related
Dec 22, 2011
I have an issue when I use Airplay through my iPhone4S, my router reboots after 30 secs or so. I have a WRT54G2 v1.5 and the receiver is a Pioneer VSX-1021-K.
However, when I used Airplay through itunes from my laptop, it works just fine. In addition, when I borrowed my neighbors router's(BELKIN) it was working fine also. So this lead me to believe that it's my router that is causing the issue.
View 7 Replies
View Related
Oct 13, 2011
I have 2 X E4200 router, one is directly connected to the internet and the other is in the bridge mode connected to the first router. I have apple TV connected directly with the bridge router on one of the Ethernet port.I notice that when you start apple Airplay mirroring on the iPad2 both the routers will hangs with no reason and the only way to fix it is to reboot the routers. I have reset both the routers to factory default twice they both are running firmware 1.0.03 build 14 .
View 9 Replies
View Related
May 10, 2012
I have a DIR-665 and I'm trying to install a B&W zeppelin air speaker, the speaker detects the wireless network but I cant see the airplay logo in the PC, mac, ipad or iPhone. Try with another router and ir works. try with a wired cable but still the same problem. IS there any issue with this routers and airplay, ATV or similar items? [code]
View 3 Replies
View Related
Oct 16, 2011
I've just confirmed that everytime I try to stream music from my MacBook Pro (iTunes) that is connected to my WiFi network using the 5GHz mode (channel width is Auto, channel: Auto (DFS)) to a couple Airport Express cubes are connected via the 2.4 GHz WiFi (channel width: Auto, channel: 10) the E4200 router reboots. When I set the MBP to use the 2.4 GHz mode I can stream music without causing the E4200 to reboot. The E4200 is running firmware 1.0.03.
View 9 Replies
View Related
Feb 20, 2012
what Linksys routers, e.g. WAG120N, are compatible with Airplay and Bonjour?
View 9 Replies
View Related
Nov 13, 2011
My problem is this: Randomly, the DIR-825 will prohibit streaming to my AirPort Express via AirTunes. It'll also disappear from Bonjour Browser and AirPort Utility. I can connect directly to it, if I enter the IP into the AirPort utility directly.The only way to get it to come back is to either reboot the DIR-825, reboot the AE, or unplug the ethernet to the AE.
View 3 Replies
View Related
Mar 5, 2013
I have a problem when doing Apple Airplay mirroring from my iphone5. Every time it kmocks the wifi signal off so I need to reboot the router. This is only happening on the iphone 5, and not other apple devices using mirroring. Our ipad 3 mirrors perfectly without affecting the wifi. There isn't any specific settings on the iphone 5 for airplay apart from setting it on and off.
View 2 Replies
View Related
Jan 17, 2013
At our house we have Fast Access DSL through ATT. We are getting very frequent disconnects and lags. We have multiple devices running off of a single DSL modem/router. It has wireless and wired connections available. Our wireless devices disconnect as frequent as our wired devices do. We have called ATT many times. They have had us replace the DSL filters and did a line test outside our house which came back clear. However, when they run a line test while I am on the phone with them, they say they detect multiple errors on the line. We have replaced our DSL modem with a new one as well. It is a NETGEAR VersaLink Four Port Ethernet Wireless Gateway, Software VER:06.04.12. The self-diagnostics on the Modem come back clean with no problems detected. We get static on our phone line frequently as well.
[URL]
In the technician readout part of my modem I also see this:
1Manufacturer NETGEAR
2Vendor ID b5004946544e449c
3Model NumberB90-755025-15
[Code]......
View 2 Replies
View Related
Mar 23, 2013
We just upgraded our internet, which also meant installing a new WiFi router, and mostly it's working fine. The two desktops and two of the laptops in the house all play nicely with the new router, but the third one (an old Fujitsu Siemens AMILO La1703 running Vista Basic) mostly stops responding when I try to connect to the new network. Any other network works fine. I can't actually connect to them since I don't know the keys, but it doesn't affect the laptop. When I try to connect to our new network however, the network connection dialog boxes stops responding and if I try to restart Explorer I still can't open any network related settings or menus. Most of the other stuff works.
I have tried manually configuring the network with the SSID and network key, but the result was just that I couldn't open the network settings at all, even after a reboot, since it was already trying to connect. I have also tried booting up in network enabled safe mode, same thing happens. All drivers are the latest. If I connect it to the router with a cable everything works fine.
View 7 Replies
View Related
Feb 2, 2013
my laptop is lagging on all fronts when connected to the interweb and i have no idea why, i dont know what specs you would need in order to diagnose but heres the spec page
View 1 Replies
View Related
Jun 13, 2012
We have one router and we plugged a second computer in. We first played Battlefield 3 and both had fine pings. Later, the original computer, which had always used this router was fine, BUT. The other computer began (I guess) to have problems. Diablo 3 and League of Legends had almost unplayable pings (well, around 200). In the meanwhile the other computer was playing BF3 with good pings.
View 1 Replies
View Related
Mar 20, 2011
I bought the Dlink 655 about a week ago, it worked fine online via Wi-Fi for my Ps3 for the first few days, then after the first few days it started lagging. It will have little lag jumps every 5-10 seconds and it is really annoying and it really makes playing online impossible. Also it wont let me view videos through the internet on my Ps3, I never had this problem until I got this router
View 1 Replies
View Related
Nov 18, 2012
Does the 22xx Series FEX support static or dynamic LAGs between itself and a server?Imagine a server with dual 10G NICs, and I need to connect them to the SAME 22xx FEX....can I set up a LAG between the two 10G NIC ports and two 22xx FEX Host ports? Does it depend on how the FEX is connected to the parent 55xx?
View 0 Replies
View Related
Apr 30, 2013
I just installed a WLC 5508, running 7.4 code. I can not seem to get the Airplay to work with apple TVs. The iPads and Airplay are on the same wireless network. What can I do to get it to work? Is there any documentation on how to get Airplay to work?
View 1 Replies
View Related
Apr 7, 2013
Apple AirPlay won't work on AppleTV (from neither computer nor iPhone) with my new Cisco small busines router WRVS4400N. It was working just fine on old consumer level linksys router. I have spent 3 hours with Apple support to no avail. Apple TV works fine on internet functions (netflix, YouTube, etc.) and I can play music and videos from the cloud, but iPhone and computer can't connect to AppleTV even though the icons appear in iPhone and Computer... just can't establish a connection.
View 2 Replies
View Related
Jan 2, 2013
I just purchased an Apple TV 2 and am trying to use it with Airplay at my business. We have a WLC526 controller and three 521 access points.
We have a guest VLAN on our network which spans both the wired and wireless networks. The guest VLAN is VLAN # 100 and the numbering is 172.16.1.0/24. On this network, 172.16.1.1 is an interface on our ASA which clients on the guest VLAN use as a default gateway. On the wireless side, there is an SSID configured in the controller called LPGA-Guest which is bound to VLAN # 100. Clients that connect to this VLAN get addresses in 172.16.1.0/24 and can access the Internet through the ASA without any trouble. This has all been set up and working for quite some time.
What I have done is attached both the Apple TV and an iPhone 5 to the LPGA-Guest wireless network. I verified that they both have IP addresses in the same subnet, but when I try to bring up a list of airplay devices on the iPhone, nothing shows up. From what I gather, this is because multicast traffic is not being handled properly.
The following two threads have some info that I was looking at:
URL
URL
This is how I have the multicast options configured in my controller. I don't see an option to enable IGMP snooping.
View 12 Replies
View Related
Feb 25, 2012
Unable to use AirPlay on a D-Link network. Disable WMM in the Advanced->Advanced Wireless tab.I struggled for weeks with this. AirPlay worked fine on an all Apple network but when I switched to the DIR-655 as the router/ap AirPlay became invisible. I could see the Airport Express in the list of connected devices with an IP address but the AirPort utility and AirPlay enabled apps were unable to see it. Disabling WMM fixed it immediately and I am now back to streaming music.
View 14 Replies
View Related
Oct 12, 2012
We have been successfully using our Aironet 1140 AP in standalone mode with mainly Windows pcs & laptop users, and now, iPads and iPhones. All seem to connect happily through the 1140.
Recently we have a requirent to be able to use Apple's Airplay. Basically, it is not working through the 1140, it works ok via wired ethernet. Can the 1140 support Airplay? - If yes, what precisely must be enabled/configured?
We have a single Class C network without any Vlans. I understand multicast must be enabled, I can't see where to enable this. How to get this working if it is at all possible.
View 3 Replies
View Related
Aug 16, 2012
Struggling to enable Airplay using a WAG160N. Any settings I need on the router? Looking on forums, came across suggestion to disable WMM support. This seemed to work and i had Airplay but now I've lost it again.
View 1 Replies
View Related
Dec 10, 2012
Why does my belkin f7d4401 playmax router: allow iTunes and iPad/iPhone to see my Airplay B&W zeppelin Air when connected wireless but will not allow iTunes or my iPad/iPhone to see my Airplay Marantz NR1603 when connected via cat 5 cable. (I know the connection is fine on the NR1603, as it streams from internet radio with no problem at all)It seems to be just airplay that is not operational through the router.
View 2 Replies
View Related
Jan 19, 2012
I'm having alot of trouble trying to connect more that one LAG between two SG300-52 switches.Basically i have configured both switches with the same vlans. For 2 of the vlans i would like to connect them together between the two switches using LAG. Switch1 has Vlan 5 (ports 1-12) & Vlan 10 (Ports 25-36) with LAG configured on ports 1-2 and ports 25-26. I have setup the second switch identical to the first. But when i connect the LAG's there is no connectivty. If i disconnect one LAG the other starts working.Can you only have i interconnect LAG between switches?
View 1 Replies
View Related
Jun 6, 2012
I've got an apple Airport Express and have managed to set it into my network. Airplay works on both Itunes and my phone. However after 10-15minutes the Airplay drops out and the network map shows that the airport express is 'offline'. however the airport express LED remains showing it still have connection to the network. The only way to get it back is to reset the AE. The apple forum has lots of people stating the same problem with WAG120n routers.
-Router Firmware V 1.00.16
-Airport Express firmware version 7.6.1
-windows Vista
View 2 Replies
View Related
Oct 29, 2012
I have a Netgear WNR3500L wireless router. I assume it's v1 because on the back it doesn't have "v" anything. Firmware version V1.2.2.44_35.0.53NA.When I connect using g I get 22+Mbps download speed. When I connect using n I get 10 Mbps. I've tried using both WPA2 only (laptop reports 130 Mbps connection I believe) as well as the combo WPA+WPA2 (laptop reports connection of 117 Mbps).Broadband download results don't change - they stay at the 10 Mbps level. I've fiddled with some of the settings on my laptop's wireless card - but the results are the same.For now I'm just trying to figure out where I should focus my investigation and fiddling efforts - on the laptop or on the router.
View 5 Replies
View Related
Jan 6, 2013
i have a Netgear N600 Wireless ADSL2+ router on wireless a/b/g/n dual band and all that but what i want to know is will i get better performance if i use a WirelessN card over G on a 10 - 15mb/s connection gaming wise and will it b a great increase over the G causeif its not a HUGE increase then i wont waste my money on a newer card?
View 3 Replies
View Related
Jun 3, 2012
My Acer Aspire 5610Z laptop will automatically connect to public hotspot wireless network but when I attempt to connect to a wireless network at home, set up using a Netgear modem, I only ever get 'local' internet connection only. My wife's HP laptop has no problem making the home wireless connection.
View 6 Replies
View Related
Jan 31, 2013
I am running windows vista and have installed the software and windows sees the adapter and states it is working but when it searches for available networks it can't find any. How can I download the driver and install it?
View 1 Replies
View Related
