D-Link DIR-655 :: DIR-651 Can't Connect To Wireless
Sep 1, 2012
I have a DIR-651. My router problem is that I can't reliably connect wirelessly. Any wired connection works great though.My Android devices connect to the wireless no problem as does my Windows 7 HTPC. My Ubuntu netbook and MacBook Pro are BOTH having problems though. These 2 machines will continually try connecting but never establish a wireless connection. The strange thing is, once I connect either laptop to the router using an ethernet cable, they'll establish a wireless connection a few minutes after establishing a wired connection.
My wireless network information:
802.11 Mode: Mixed n/g/b
Enable Auto Channel Scan: Enabled
Transmission rate: Best
Security mode: WPA Personal
WPA Mode: Auto (WPA or WPA2)
Cipher Type: AES
Visibility Status: Invisible
[code].....
View 7 Replies
ADVERTISEMENT
Jan 29, 2012
I have a TP-Link (TL-WR941ND) wireless router in my living room and I want to expand my connectivity to get to the bedrooms area. I have a D-link (DI-524)wireless G router I want to take advantage of. How can I connect the two routers (no cables to be used) together so I can have acces to the internet from my room?
View 1 Replies
View Related
May 4, 2012
[URL] but then I am lost about how to connect the AP to the wireless router. And how to use the same SSID. Should I setup WPS?
View 6 Replies
View Related
Jan 30, 2013
Region : Others
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP :
After I configure the WAN setting on TL-MR3020, my laptop unable to connect to my TL-MR3020 anymore, the message says "windows was unable to connect to TP-LINK_POCKET_3020_B5F9AD".
View 2 Replies
View Related
Nov 14, 2011
Im using a Tp-link wireless router and I have a modem attached to my pc. I just noticed that if I turn off my router, the Ethernet light on my modem turns off, but the power and dsl lights are still on. Is there a way for me to use my pc even if my router is turned off? If I remember right, i've tried it before and it worked... But now, I have to turn on my router just for me to be able to connect to the net on my pc.
View 3 Replies
View Related
Jan 8, 2012
I have recently moved and I brought my wireless router with me from my last home. The wireless router is a D-Link DIR-615 Wireless N Router. I reconfigured the router with a new connection name, password and security key. Upon trying to connect to the wireless network once it was fully reconfigured (no problems reconfiguring whatsoever), I was getting the "Windows was unable to connect" message. Since then, I have been able to connect successfully to the network with an iPod Touch, Xbox 360, Playstation 3 and my roommate's laptop. I have tried resetting the router and modem with no success. I can see the wireless network in the available connections list and other networks in my area. I can also connect to the internet through this router manually using an ethernet cable (which I am doing now, to post this message). I submitted my computer's specs using the SysInfo app given at registration.
I will also include an IPCONFIG /ALL as I have seen this requested in other threads like this one. These are the results of that: (note: this was run while connected through the wireless router using an ethernet cable)
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kalmah
Primary Dns Suffix . . . . . . . :
[Code].....
View 8 Replies
View Related
Nov 12, 2012
I have a D-Link wireless router DIR-524( it has 4 LAN ports, no USB port) and i want to connect my USB printer HP Laserjet Pro P1106 to the network. Want to know if that is possible?
View 1 Replies
View Related
Jun 30, 2011
I recently bought a windows laptop running vista to do windows testing on for web development (I use macs normally).I was shocked to find that I can't simply push connect, enter a key and then be connected to our home wireless network... no of course not because it's windows and nothing is easy or practical.Anyhow, before I go on an anti windows rant, I actually need this working.So at home we have a wireless network secured by a 32bit WEP key.On our macs I simply push connect, enter this key and we're away.With my new vista machine I go to Network & Sharing Center -> Connect to a network and click our network.I'm then immediately met with a screen that says "Press the configuration button on your access point". I have no idea what this means.Down the bottom of the screen there is an option that says "I can't find the configuration button... I want to enter the network key or passphrase instead" Which I click.The next screen I click "Enter/Select additional log on information" but this brings up a user name/ password/ login domain screen... I just want to enter my 32 bit key and be connected. I'm using a D-Link DIR-615 wireless router.Also, when I run "ipconfig" in the command prompt I get."Media State....: Media disconnected"
View 1 Replies
View Related
Jul 1, 2012
How to connect TP-Link 3G wiireless N router model:TL:MR3420 and WIRELESS N Router with ethernet cable to share internet
View 1 Replies
View Related
Feb 25, 2013
Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : TD-W8970_V1_130201
I just bought online a brand new TD-W8970 modem/router but I'm in trouble with getting ADSL working.I set up a PPPoE connection with the settings from my ISP but the ADSL Led on the device is solid OFF and in the Admin section it says DSL Status: Not Connected.
[code]...
View 5 Replies
View Related
Nov 27, 2012
I have just replaced a wbr-1310 with a dir-601. I can connect with an Ethernet cable, but not wireless. I have comcast cable with a Motorola surfboard modem. I was able to connect with the wbr-1310 with this setup.
View 9 Replies
View Related
Jul 29, 2012
i got a Dir-615 N300 few days ago...and it took me 2 days to make the wireless network and connect my HP Laptop to it...now my cousin wanted to use my wireless and couldn't...spent like 3 hours trying different things and nothing...
Basicly...she can see my SSID,but when she tries to connect...it doesn't work...it just...loads...it doesn't ask for the password or anything...
A friend told me that i might have to give her acces in some way... I have no idea what i did but it worked for my laptop.
Few Details:
My cousins laptop is an Acer with Xp SP2 i think...(while mine is HP with Windows 7)
Security mode WPA-Personal
Cipher Type: AES
Hardware Version: Hx
Firmware Version: 8.02
btw i did everything on the http link...not the cd...for some reasons the cd didn't work for me
View 3 Replies
View Related
Jan 21, 2012
My RIM Playbook will connect to the DIR-601. My HP Laptop with the Intel WiFi 5300 AGN will connect to it.
However the Acer Aspire 1640 with the Intel PRO/Wireless 2200BG will not.
SYMPTOMS: The system can see the network SSID, even seems to pick up the correct encryption (AES or TKIP) and also whether I've configured it for B or G modes. However when I attempt to connect to the network, the system prompts for the key, then pretends like it never did. A second attempt prompts for the key, and attempts to connect, but fails, simply saying "Cannot connect."
SOFTWARE: This laptop is running Windows XP Home Edition SP3. I've tried connecting using the Intel client PROSET software (the newest version, just downloaded) as well as the native Windows client. THE EXACT SAME BEHAVIOUR OCCURS, leading me to believe it's not a software issue.
HARDWARE: This is a D-Link DIR-601 at Hardware Version B1 and Firmware Version 2.00NA
I have the router set to WPA-Personal, WPA2 Only, TKIP (have tried it on AES too), G only (have also tried B only). The router has already been hard reset and I started over from scratch. I've also ensured I have the latest drivers for the wifi adapter.
Other laptops, tablets, and even phones can connect to the router with no issue.
Seems like this is an incompatibility with this particular Intel WiFi adapter, but cannot find any official list of incompatible hardware I can use to confirm.
Would changing the software to DD-WRT work in this case, do you think? Or is this more likely to be a hardware thing?
View 14 Replies
View Related
Jun 27, 2011
I bought this router a couple of months ago and it was working fine until this morning. I tried to use the internet and there was no connection at all (wired or wireless). I tried power cycling but that didn't work. I finally decided to call my DSL provider and we changed the setup from the router connecting to PPPOE to the modem connecting to PPPOE. Now, my two computers (wired) can access the internet but all my wireless devices (Android and BB) connect to the SSID (unique) but can't actually access the net.I called DLink but they decided to stop assisting me once I told them that my computers could connect but not the wireless devices. They said I need to call the manufacturers of my wireless devices - I really doubt that all 4 of my wireless devices are faulty.
View 11 Replies
View Related
Sep 7, 2012
I have a network that starts with a Linksys wireless router (DSL connected here) then it goes to a Netgear switch (computers connected here) and then a Netgear wireless router for an iMAC to connect to. I can't see the last router or the iMAC on my Win 7 machine? when I map network I get an error message about an incompatible device.
View 1 Replies
View Related
Sep 4, 2011
I have an older D-Link DGL-4300 wireless router, I've purchased a wireless home security system and can't seem to get the 2 connected. I've tried resetting the router & modem (powering down & waiting from 1-5 minutes), and my router just won't read the port that I've plugged the security system ethernet cable into.I think the problem is my firewall but I don't know how to set it to allow the router to read the port that I've plugged into, or it could be the firewall that my anti-wirus has or possibly both.My equipment is Comcast cable, router (as noted above) and a D-Link DCM-202 modem, Windows XP 3, and Norton anti-virus. Now I also have my phone through Comcast and it has it's own modem.
View 7 Replies
View Related
Jan 4, 2012
I have been having difficulty connecting to the internet at my new place, I'm starting to think that the network card I recently bought (D-Link DWA-552 XtremeN Desktop Adapter) might have a problem, but I am not sure. I am currently using my landlord's internet, so I don't have access to the router to turn it on and off, which Windows suggests doing constantly, but I don't think that's the problem because I have internet on all my other wireless devices (Phone, PS3, Xbox).I am able to see the router most times and connect to it, but I am unable to connect to the internet, the networking image in the bottom corner has a yellow warning sign. Also, after a certain amount of time, the wireless card is unable to detect any wireless signal, the networking image in the bottom corner has a red X through it. I disabled all networking interfaces besides the wireless card because of an error message that I thought may have been caused by it: "This computer is continuously switching between two or more wireless access points or routers", but disabling the other interfaces did nothing and the message still appears after troubleshooting.
View 1 Replies
View Related
Apr 17, 2012
I have a D-Link AIrPLus G DI-524 802.11g/2.4 Ghz Wireless Router and a HP Pavilion dv7 Notebook PC. I cannot seem to connect to the router. I can do so on my Blackbery Curve but my computer tells me "Windows was unable to connect to *****" There was no chance to give the Security Key.
View 9 Replies
View Related
Nov 17, 2012
I have a d-link n150 model (wireless router) that i cannot get to pick up the signal of an 3G mobile broadband optus prepaid stick when pluged in. I have reset the router settings multiple times and nothing. Nether had a router before this one .How do i fix this problame and is it possible that the problame is in the settings of the internet stick?
View 3 Replies
View Related
Jan 18, 2012
we purchased a new Toshiba laptop recently w/ win 7 OS and we cannot connect wireless to router using verified password. all other laptops, computers, LCD, etc. connect with no issue. we are using N response and WPA2 security settings. we have changed security from personal to auto with no success. we have also changed settings from tpik and aes - no success. we have verified the password several time to make sure and we also tried a friend's laptop running win 2000 OS and it connected perfectly with password. the strangest thing is that we managed to connect the new Toshiba wireless (secured) at our friend's house eliminating the thought of an issue with the laptop. we upgraded the firmware to the lastest version and that did not solve issue. the new laptop sees the network router and request password but, cannot authenticate to connect
View 8 Replies
View Related
May 7, 2013
Region : India
Model : TD-W8151N
Hardware Version : V3
Firmware Version : 120530
ISP : BSNL
Net is working smoothly from LAN, but no success on wifi. Over wi-fi, I can connect to router but cannot access net.
View 2 Replies
View Related
Mar 12, 2013
Model : TD-W8951ND
Hardware Version : Not Clear
Firmware Version :
ISP : Metronet BPL
I connect to the internet by BPL modem on electricity , for using my modem's wireless feature ı have to close DHCP and use modem in bridge mode, otherwise I can't use wireless, And my problem is connecting to the internet with my LG 42LM640S smart tv using wireless, When I talk with LG techinal service they came and try to connect tv to the internet with using their android phone's hotspot feature, my tv connect with phone's hotspot feature to the internet,So they said that "you have to change tp link modem's encoding system?Now it's encoding mode in WPA enconding system :S But whwen ı shut down encoding wireless tv didn't connect again?
View 2 Replies
View Related
Nov 13, 2012
Region : Others
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 2.0.0 Build 120427 Rel.09135
ISP : True
I just bought the wireless router as stated in the subject and I cant get 2 of our PC�s to connect wirelessly for some reason. 4 other PC's are fineAll machines running windows 7, but when the authentication type on WPA2-PSK the 2 computers ask for a password which we put in but keeps saying its wrong, but infact its right.I can connect them on WPA-PSK, but then all the computers drop out after 30 seconds.
View 2 Replies
View Related
Apr 25, 2013
Region : Colombia
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 110915 Rel.40896n
ISP :
i have a TL-WR740N router.I need connect 2 networks.
network 1 => 192.168.1.x connected to WAN port.
network 2 => 10.0.0.0.x connected to LANS port.
Router
assigned address:
192.168.1.101 WAN
10.0.0.225 LAN
[code]....
i can't connect to 10.0.0X network (pcs connected to router lans ports)I need bidirectional connection to networks.
View 3 Replies
View Related
Jun 8, 2011
I can send email though my yahoo account (which is hard wired to my router) and I can access the internet through my wireless device (iPhone 3GS) but I can not send email through my wirless device. I keep getting a message stating it can't reach the smtp server.
View 1 Replies
View Related
Apr 23, 2011
I want to connect to the internet with a wireless connection on a new computer. When I connect I am asked the security code that I do not know where to look.
View 1 Replies
View Related
Jan 18, 2013
Region : Australia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Yesterday I got a new TP-Link TL-WR1403ND Wireless N router. And after trying for ages to try to connect my Galaxy Nexus and iPad (both Wireless N devices), I finally called the TP-Link Support.Both devices could see the wireless, but would never let me join.Anyway, support told me to try connect a laptop if I had one, which I did (a very old one) and it also could not connect. The first thing the tech got me to do was set the mode from mixed-b/g/n to mixed-b/g. This got it to work, and the tech basically said � there you go, works. But the main reason I got this router was to use wireless n.Anyway, I told her that was not acceptable, she then told me to set it back and change the security to WPA-PSK (it was WPA2-PSK). I did this and she also told me to disable WMM.Anyway that worked, so I was happy. I then went and change the security back to WPA2, and it still worked. So the main issue stopping me from connecting to the WiFi from my devices was WMM.So after all that... I looked up WMM, and can see it basically a QoS feature. So why does it not work with my phone, ipad and laptop? I have searched the net, and from what I can see, it is a very Important thing to have WMM turned on. So why won't it work with my devices? All three of them can see the wireless network, I can put the password in, but then they don't connect.I am on the latest firmware (can't check the actual name and version as I am not at home), so is there something wrong with this particular router? Is it a known problem? Do I have a faulty unit?
View 6 Replies
View Related
Mar 23, 2013
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Plusnet
I'm on a fibre connection from Plusnet and bought the TL-WR1043ND because of the advertised ability to use PPTP VPN to connect to my work server (the supplied Plusnet router doesn't allow it and is locked down).However, I cannot connect via PPTP VPN on this TL router either. I know my VPN settings are correct and I have had a brief search and found others have this problem, but short of installing third party firmware on the router, how to get this router running my PPTP VPN?
View 1 Replies
View Related
May 15, 2011
I have two Dir-655's - router1 and router2.
Router1:
ip 192.168.0.1
subnet 255.255.255.0
DHCP enabled range = 192.168.0.100 to 192.168.0.200
Router 2:
ip 192.168.0.2
subnet 255.255.255.0
DHCP disabled
Routers are connected to each other via LAN ports with a switch in between.Both routers have the same wireless SSID with the same password. I am able to connect wirelessly to both routers no problem.
I have a machine running a shared iTunes library which has a wired connection to router1. I also have an Apple TV wired to router2. My issue is if I am connected wirelessly to router2 I may or may not be able to connect to iTunes library. Conversely, if I am connected wirelessly to router1 I may or may not be able to play content from iTunes to Apple TV. I cannot figure out why everything works fine sometimes yet at other times I cannot connect devices between the two routers.
View 3 Replies
View Related
Nov 27, 2012
I have to reset my wireless router multiple times per day. Seems to just be our two laptops that fail to connect periodically, not other devices (iPods/cell phones/Wii). Both laptops have Windows 7. Router was replaced 2 years ago (went from Belkin to D-Link DIR-655) and the D-Link started acting like this a few months ago and is getting worse. I updated firmware on router last week in hopes it would fix it.
View 15 Replies
View Related
Aug 12, 2012
I've been using D-Link DIR-600 wireless router for two months with my ISP, SmartBro. A week ago my internet went down due to heavy rain and technical support had a home visit yesterday to re-activate my internet connection. My net connection came back smoothly using a direct connection from modem to laptop.When I tried to connect the modem to my wifi router, the internet was not detected. Even if I reset the router settings, no internet connection was detected. Initially, I thought there is a problem with my wifi router so I connected the modem to our Edimax wired router but still it could not detect internet access. Every time I open a browser while connected to a router, this message is shown (see attached screenshot).
I tried using another ISP, Wi-Tribe with both wired and wifi routers and everything worked well. So now I assume the problem lies with my SmartBro ISP. I called the ISP hotline but they told me that they do not provide support for router connection problems; only with single, direct connect to a PC.I asked a neighbor IT technician to look into my problem but he too could not solve the problem.
View 14 Replies
View Related
Mar 24, 2011
was working fine with my new router DSL-2730U D-link router and using it's wireless connectivity with G/N mixed mode..and i noticed that the range is so low so i decided to switch to N-only mode and when i did that i couldn't connect at all!..the router uses N-150 btw.
View 8 Replies
View Related
Jun 25, 2011
I'm desperately trying to set up my old D-Link DI-524 on my parent's Toshiba laptop...I'm visiting and going thru withdrawals! I've installed it, run the wizard etc but it doesn't work...not even wired. I've tried various cable configurations and I get nothing. Both cables are good and work just fine connected to the modem. I've reset it a few times, upgraded the firmware and still nothing...I'd think I'd at least get it to work hard wired. My laptop can see the network I set up even...but no data transmission. I'm not a wireless expert, but I need to become one fast!
View 3 Replies
View Related
