I sold my router to someone the other day for use on twc after changing isp's. It is a motorola sbg6580. TWC uses these modems all the time and sells them themselves so i figured it would work. Well i got a call from the guy i sold it to saying they cant access the mac adress on it. I know it has 2 of them and I dont know if its their tech guys having problems which is what i thought it was but he wont leave me alone and i used hte modem a week before selling it and straight back to the box so i doubt its the modem itself. He told me though that I needed to have the mac adress unlocked or something from my old isp?
The university where I study will be soon giving Mac Address to students. (only way to access internet). Now I am concerned about privacy. Does MAC address tell what I am accessing? What is purpose of this?
i have a laptop running windows xp sp2, i do PLC programming and often need to put an IP address into my pc, but i also often need to go on the internet,is there any way i can put an ip address in my laptop and also access the internet at the same time.I dont want to have to take out my IP address all the time to go on the internet.can i assign like a gateway or something?
I will like to access a wan adress we are hosting, from the inside.Is this posible?, but i can't access it. only via our internal adresse (192.168.2.2),it can be done on other modemswith this command "ip nat loopback on"
I have domain controller windows server 2003 and 30 domain members, and everything was working fineYesterday our xp client complain that they cannot access shared folders and files in our domain controller server.After some time i found that i can access the shared folder by name (\nameserver) but i cannot access them by IP (\XX.XX.XX.XX)[CODE]
My laptop running Windows 7 has been fine until this holiday, connected to a hotel wifi that "trapped" the broswer and requested a login and password. That worked fine, but now I cannot access any other wifi networks.It sits for a while after entering the code and then has limited access, running the troubleshooter it says that I have no valid IP address?Tried IPCONFIG /RELEASE and it is saying "No operation can be performed on Local Connection 2 while it has its media disconnected"
I need to setup a system where my staff can access the internet using the IP address at my buisness. IE. My staff can log into our marketing software (which will only allow access from my buisnesses IP address) from home. My thoughts were to leave the computer on at work all the time and then use a remote access program like logmein to remotley control that computer however I am then limited by only having one person able to do this at a time. I want to be able to use my buisness internet connection as a proxy as such....i think? Computers are running windows 7. Buisnesses internet connection is DSL with wireless modem
we recently got a new router and added it to our network... works fine the problem now is that i'm trying to add some other ip addresses to access wireless internet (for security reasons the wirless internet is available only to one set of ip addresses) but now that i try to access the router config to get that ip address in i cant access the router config. i try multiple addresses but still nothing. i try to find the ip using cmd but it just gives me tunnel 000000000
Im getting internet but i cant access my router address to get my config page. I had broadband wired internet a few days ago but now im using a wireless connection could that be the problem?
I have an application for work that I need to access true vpn connection :I have Sbs server 2008 with vpn support , I can access my folders and exchange and ... , this works fine.Now I have an application that search to connect to the server via local ip at work but when I use vpn to access it then the application goes searching on my local ip adress and not on the vpn ip adress.vpn has same ip as local ip at work).Now my question is: Can I set the application to search on the range of my vpn connection instead of searching on my local ip when i am not at work but on a different site ?I tryed almost anything but the application still looks directly on my local ip instead of the ip of my vpn
I updated my firmware to the latest update a and then restored My personnel setting and now I can not access my ftp, I checked my IP address to make sure it didn't change , setting looks like did before update I went from firmware 121 to 135, was there new setting that I have to change to get it to work. I get no log in screen I get Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access the folder?
Details:A connection with the server could not be established
I cannot access my router through IP address or dlinkap. I am trying to connect a bridge for the living room in my house.When I do an IPCONFIG my default gateway as weird characters in front of the actual IP fb23:ff23 etc.
Ok so for many days I did manage to access the IP address for a livestream, and to go into the advanced setup of the camera. Suddenly, it stops working. i can't access it. What happened?
I enter the IP address into the url field and hit enter. Several seconds pass by.. Then I get this message: "The connection has timed out." and nothing happens.
This is making me upset cause I need to get this camera working NOW! I want to delete everything on the SD car, and also lower the sensor so that it wont record everything including NON movements like it does now.
I have 2 AP541N access points. Have been working well for a couple of years. Later last year they just dissapeard from CCA one day. COundt access them but they were still delivering 'wireless' so to speak I have recently put them back to defaults to try and get them back in to CCA. i had one, but not the other. They would work fine via GUI/web access.Then i updated them to 2.0.4 (both images) and since doing that i have no access to either of them via any form.
To put it simply, my parents live far enough in the middle of nowhere that they have no access to high speed internet. Of course, there are always wireless solutions, but the options around here are pathetic and comparable to dialup. They were content with this; I moved back in with them for the time being and am not.y solution has been to dump just shy of $1,000 into a point-to-point wireless bridge setup that claims to have a range of 5 miles non-line-of-sight. I have one antenna set up four miles away on top of a building that has high speed internet.Unfortunately, I was a stupid fool and set that end up without enabling security, thinking that it wasn't a big deal. Nobody in that town has a mind for anything but farming and drinking. That was my mistake. Some asshole set a password and forced me to do a factory reset on the access point and now I can find no IP address. It's like it only reset halfway to factory defaults or something
I tried to configure my wifi router recently to secure my internet connection. I wanted to add a MAC adress filter, but I had to leave before I could enter them all. I thought that I wouldn't have to enter my own MAC adress since I'm directly connected to the router with a wire, but it looks like I should have entered my MAC adress, because now I can't get access to my router by typing the IP adress, as usual. I tried to reset it, but it doesn't work.
When signing in on my e-mail I accidently clicked on "yes" when asked if I wanted the computer to remember details. Now I can't find out how to reverse it. new to computers as you can see.
I want to do what I thought would have been a simple enough task - block my kids phone/computer after certain hours. Instead of blocking the specified MAC address(es), all my computers does not have internet access. As soon as I disable the policy, internet access is on again. Here's what I did:
I have Linksys router model no. WRT160N, which I have been using for three years. I need to add two iPads to my router but I do not know the network password. I am trying to access the router IP address 192.168.0.1 to find out the network password, but when I put HTTP://192.168.0.1 in my browser, I receive the message: Internet Explorer cannot display the webpage. How can I find out the network password?
There is a Linksys WAG54G2 firmware v1.00.19. If you try to configure access to wi-fi on the list of MAC-address get the error "The MAC address can not be broadcast address" for the MAC address - 5c: XX: XX: XX: XX: XX, for mobile phone Sony Ericson Neo. Safety on the modem is turned off. Laptop computer and connect to Wi-Fi without any problems. Prompt a possible solution. Which parameters can be set?
Normaly all incoming IP addresses can use NAT to gain access. I would like to make a rule that only one IP address can connect to my router and use that port or range of ports defined.
Is there a way to configure a SRP 527W on such a way?
If not possible now, can I expect a software update ?
I need to connect from an inside host to a host located in the DMZ zone for DNS queries. The host in the DMZ zone has a static NAT to the outside. The point now is that I would like to connect from inside to the NATed outside address, means to the public Internet address.
Inside host: 10.0.0.1 -> PAT for 10.0.0.0/8 to 20.0.0.254 (Outside Interface) DMZ host: 192.168.1.1 -> NAT to outside to 20.0.0.1
The traffic should be 10.0.0.1 udp>1024 to 20.0.0.1 udp=53. The source IP address on the outside interface now is 20.0.0.254 (according to the PAT), the destination IP address 20.0.0.1. The DNS reply from 20.0.0.1 should go back now to 20.0.0.254 and then to the inside host 10.0.0.1.
I know that on the PIX it was not possible, to have outgoing traffic on the outside interface which immediately enters again the same interface. Can I realize this scenario with the ASA 8.4(3) release now?
Is the following sysntax correct in removing a remote access vpn address pool and inserting a new one on an ASA5510?
(config)# NO ip local pool BWCVPN 192.168.200.1-192.168.200.128 (config)# ip local pool BWCVPN 192.168.300.1-192.168.300.128 (confif)# tunnel-group BWCVPN ciscovpn general-attributes (config-general)# address-pool BWCVPN
We have a three tier network with a centralized core switch and multitple distirbution swithces - all 6506 routers.EAch dist switch is its own PIM SM domain and the RP so we never send multicast between the dist switches and through the core.
We are putting in a centralized server at the core switch which has to provide specific mcast < X Groups > to all servers at the dist level on all dist switches.
So we would like to define the RP <core rp ip> just for the <X groups> on the Core switch and tell all the distribution switch that the core is the RP for just the <XGroups>
If we put these commands on all the switches including the cores will that set the rp just fo the <XGroups> to the <core rp ip > ?Do I have to define the deine an ACL for all groups if i define it for some or will groups not defined by the ACL defualt to the local RP?
do I have to put in the override command ? (We are using MSDP not autorp)
ip pim rp-address <distn rp ip> ip pim rp-address <core rp ip> 99
