Wireless Connection But Can't Connect To It
Jun 23, 2011
I brought my laptop AND wireless router to work to have our IT guy look at it and it connected fine on my office network. Now that I have the router back at home and connected back to my modem, it won't work. If I'm hardlined into the computer through the modem/router it works fine. When I remove the cable from my laptop, I can see my router (network) but it's telling me it can not connect. The troubleshooting error is telling me that Windows did not receive any response from the wireless router or access points. I've tried configuring the router a thousand different ways, resetting it, resetting to factory defaults, etc.
View 1 Replies
ADVERTISEMENT
May 4, 2011
So today the comcast guy came over and he put in a new modem cause the other one broke, i have a wireless router hhooked into it. its a WRT120N router from cisco. After the net was installed it was working on my phone and my moms laptop, but on my laptop it picks up the wireless signal but will not connect. It has updated firmware and has no wireless protection because i live in the middle of no where so no pass required. my Wireless card is a Intel(R) Wireless WiFi Link 5300 in a Ibuypower.com laptop. Due to me not having internet without a modem for the past couple of days i have been at a friends gaming with it and the net has worked fine, but yesterday during starcraft but laptop kept losing internet randomly like it was just lose connection but after about 30-60 seconds it would reconnect itself and id be fine. but when i tried to connect to this new modem at my house which my moms pc can and my iphone can, it just stops connecting like the little screen just disapeers without a reason why it failed. Im not sure what it can be but my drivers are updated and i was wondering if it could have been a virus but my computer is clean.
View 4 Replies
View Related
Jul 27, 2012
I am not a computer tech. All i know how to do is play my games on them. I need to get the wireless working on this desktop but when i go to scan for a wireless network, its just saying broadband. how would i go about switching it to wireless?
View 3 Replies
View Related
Jun 2, 2012
How do I connect my laptop to my wireles connection?
View 1 Replies
View Related
Mar 22, 2011
it an hp notebook PC with an intel processor and 3GB of RAM
View 1 Replies
View Related
Mar 31, 2011
I made a wireless connection via a rooter n a switch ,am able to connect to the wireless connection with my laptops but not my desktop n am in the right range.
View 1 Replies
View Related
Jan 8, 2012
Cant connect to my router at Home during LAN cable, i dont know why because my other laptop Can find it and connect it. My PC Can only find it but not connect it to the internet?
View 4 Replies
View Related
Apr 15, 2012
My laptop is working fine wirelessley however my desktop which is hardwired and has been working fine for months wont connect to internet ? Ive brought my laptop upstairs and it connects fine via LAN cable to obv an issue with desktop computer/settings
Have tried all the usuall restarting modem etc ... dont know what to do to try and resolve the issue
View 12 Replies
View Related
Apr 28, 2011
Since successfully restoring my laptop to factory settings I have been unable to connect using my Intel PRO/Wireless 3945ABG Network Connection.Initially it worked, but after a while it stopped. I have completed several system restores, and the wireless connection works for a few days. On the last occasion (after installing windows updates) I received the dreaded blue screen and have been unable to connect.I am not sure if it is related to installing new windows updates as prior to restoring to factory settings I had no issues with my wireless connection.I am able to connect using the ethernet cable and I am currently able to connect using Pluscom wireless usb adapter. [code]
View 14 Replies
View Related
Oct 24, 2012
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) M processor 2.26GHz, x86 Family 6 Model 13 Stepping 8
Processor Count: 1
RAM: 2047 Mb
Graphics Card: NVIDIA Quadro FX Go1400, 256 Mb
Hard Drives: C: Total - 95393 MB, Free - 51699 MB;
Motherboard: Dell Inc.,
Antivirus: Norton AntiVirus Online, Updated: Yes, On-Demand Scanner: Enabled
I recently upgraded my internet to a faster speed. I received a new router. I am able to connect my laptop via ethernet connection without any issues. I am able to connect my laptop wirelessly both at work and at school. I am unable to connect wirelessly at home. I can connect my stand alone computer to my internet connection. I am also able to connect my smart phone to this connection. When I attempt to log into the internet connection I enter the passphrase as instructed the entire screen goes blank and when I try to reconnect the computer is automatically entering a different passphrase and gives me a message "waiting for network" then it disappears and I am not connected - when I attemp to correct the passphase it will not store the new setting. I have tried updating the driver - changing the passphrase - restarting the computer, I have used the diagnostic check provided by Century Link and spent over 4 hours on the phone with them trying various things without any connection.
View 1 Replies
View Related
Jan 29, 2011
In our company, there are some 10 WAP is installed. Just I have bought a laptop and want to install wireless internet connection.
View 5 Replies
View Related
Mar 15, 2012
when i log onto my laptop a wireless network connection is always shown but i couldn't connect to that network because the error messege is allways shown
View 2 Replies
View Related
Feb 6, 2011
trying to connect my router to my tv. made a cat5 cable with the same wire configuration on both ends and it does not work. should i cross the wires on one end ?
View 3 Replies
View Related
Jul 21, 2011
I have a wireless att dsl modum with uverse and wireless laptop connectivity. the wireless somehow stopped, but i can connect directly and reach the internet. I have ping tested the nic card and it seems fine. I have rebooted the modum, the computer to no avail??
View 1 Replies
View Related
Feb 5, 2012
I can connect my xbox with the ethernet cable, but i am unable to get it to connect wireless. My laptop & phone are able to connect, I did try the steps such as resetting network configurations, i tried unplugging the router, i know my password is correct. i tried putting in the ip #'s. the xbox is not the only thing that won't connect wireless, neither will the ipod or kobo. it has been suggested that my router may be set for only a certain # of connections?
View 1 Replies
View Related
Jul 9, 2011
I had a 'No boot sector in internal hard drive' displayed, could not boot up, had to fresh install, lost everything. But now do not seem to have a wireless connection? I have a Broadcom 440x 10/100 integrated controller. Is this for wireless capability? My Fn/F2 key to switch on wireless does not work either.
View 3 Replies
View Related
Mar 1, 2011
we have a linksys router wireless system in our house and cannot get the xbox to connect to it, it finds it but it wont connect
View 1 Replies
View Related
Nov 1, 2011
Can 't connect to the free internet connection, but can on secured and that one have weak signal. What is problem?
View 7 Replies
View Related
Jul 3, 2012
I have a Samsung RV510 laptop computer running Windows 7 that is about 6 months old. It has worked well until the last couple of days. Despite the fact that it shows an active wireless internet connection, I cannot get web pages to open. I have tried both IE and Firefox with no luck. I have tried many different websites including microsoft, msn, google and yahoo and none have connected. Other devices connected to the same wireless network include a laptop running XP, a MacBook pro, an iPhone, an iPad, and several android smart phones and all have been functioning without issue. An XP desktop is also connected to the router with an ethernet cable with no issues. This laptop is the only device running Windows 7.
When I run the windows network diagnostics tool I get the message "Problem found The remote device or resource won't accept the connection". I have tried most of the recommended actions associated with the linkI have successfully pinged www.google.com and www.yahoo.com. I have also tried several other things that i found while doing research on this problem with no success.[CODE]
View 6 Replies
View Related
Dec 12, 2011
i bought an Apple iMac with Airport (an inbuilt router.) I have a desktop computer (Windows XP) in another room, and also a laptop.I bought a TP-LINK TL-WN721N Wireless USB Adapter. On the Laptop and Desktop, the wireless network is working. My network's name is listed, with full strength. However, when the message Detecting Network Type comes up, the message closes with another message - "Windows is unable to connect to the selected network. The network may no longer be in range.
View 11 Replies
View Related
Aug 9, 2011
My laptop (win7) can connect to wireless, but not Local Area Connection.This is the capture of my device manager, it reported that the driver of ip6 failure.but I do not think ip6 relates.I tried configuring a static IP address, reinstalling network driver, or disabling and enabling network cards.
View 11 Replies
View Related
Mar 4, 2012
got an old computer to use from a family member and it is not alowing me to connect to the internet. it shows all my wireless connections but wont alow me to connect and use the internet. how do i fix this problem?
View 1 Replies
View Related
Jul 9, 2012
I recently had Verizon high speed internet installed in my house. I connected a laptop to the router with an ethernet cable and everything works fine. I managed to connect with another laptop and another computer via wifi and they also work fine. I now want to disconnect the ethernet cable and allow the original laptop to be mobile around the house. When I first tried this everything worked fine. When I tried again (with the ethernet cable still connected) the wireless internet connection was recognized but would not allow me to connect. The message was something to the effect of "Windows is unable to connect to the selected network. The network may no longer be in range. refresh the list of available networks, and try to connect again." The network is certainly there and the router is right next to the laptop - fully in range. The same thing happens when I disconnect he ethernet cable. A few times the router didn't even show up in the list of wireless interner connections. I might have changed some setting someplace but I don't know which one.
View 7 Replies
View Related
Jul 22, 2012
I recently had Verizon high speed internet installed in my house. I connected a laptop to the router with an ethernet cable and everything works fine. I managed to connect with another laptop and another computer via wifi and they also work fine. I now want to disconnect the ethernet cable and allow the original laptop to be mobile around the house. When I first tried this everything worked fine. When I tried again (with the Ethernet cable still connected) the wireless internet connection was recognized but would not allow me to connect. The message was something to the effect of "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again." The network is certainly there and the router is right next to the laptop - fully in range. The same thing happens when I disconnect he ethernet cable. A few times the router didn't even show up in the list of wireless interner connections. I might have changed some setting someplace but I don't know which one.
View 13 Replies
View Related
Oct 21, 2011
A few weeks ago I tried to install vmware to my toshiba laptop to play around with is and eventually install Windows server 2008 virtually. Well I didnt complete the installation and set up because I forgot to write down the registration key #. Ever since then I have had a terrible time getting my network reconfigured and have tried everything with Verizon network support over the phone. I am now unable to get a valid Ip address or default gateway with either my Wireless or my LAN connections. I have done all types of troubleshooting, resetting netgear router, modem, ip config /reset /renew,netsh winsock reset catalog commands and etc . . . STILL NOTHING WORKS ! I have another machine that is a mac book on my home wirless network that connects just fine, the only problem is my machine. And I have also taken this machine to my job and try connect to the wireless public network and all I get is "limited access" I ran the network test that Kadar provided and this is what I get:
Windows IP Configuration
Host Name . . . . . . . . . . . . : JerryDiaz-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
View 2 Replies
View Related
Jun 27, 2011
I bought this router a couple of months ago and it was working fine until this morning. I tried to use the internet and there was no connection at all (wired or wireless). I tried power cycling but that didn't work. I finally decided to call my DSL provider and we changed the setup from the router connecting to PPPOE to the modem connecting to PPPOE. Now, my two computers (wired) can access the internet but all my wireless devices (Android and BB) connect to the SSID (unique) but can't actually access the net.I called DLink but they decided to stop assisting me once I told them that my computers could connect but not the wireless devices. They said I need to call the manufacturers of my wireless devices - I really doubt that all 4 of my wireless devices are faulty.
View 11 Replies
View Related
Mar 18, 2012
I have a E4200v2 and im getting wireless connection issues. I have updated to the lastest firmware and have checked all my wireless settings. I dont use usb storeage. I have 1 laptop using 5G, my iphone using 2G and my wife mac using also 2G.. the problem is that, once we stop using the 2G connection (leave it overnight), it just dies the next day.. it wont connect, i double check the password and it wont connect. But the 5G connection is fine.. Do i have a break E4200v2? or anyway of fixing this?
View 2 Replies
View Related
Jan 8, 2011
Its an old laptop I just got repaired now I can't connect to the internet. I'm using my desktop to type this and my other laptop works fine too with the internet connection with my Netgear router.
HP,Model #: crvsa-02ti-90
Windows XP Professional v.2002 Service Pack 3
Intel Pentium 4 CPU 2.40 GHz
Now I saw other threads like this so I did the cmd prompt inconfig/all:
Windows IP Configuration
Host name: sue-ann
Primary dns suffix:
Node Type: Broadcast
IP Routing Enable: Yes
WINS Proxy Enabled: No
[code]....
View 10 Replies
View Related
Apr 23, 2011
I want to connect to the internet with a wireless connection on a new computer. When I connect I am asked the security code that I do not know where to look.
View 1 Replies
View Related
Nov 15, 2011
I have an Inspiron 6000 (inherited from my kids). It worked great for a while, at home or on the road whenever I needed to connect to the internet via a wi-fi hotspot, until recently. I can still connect at home (wireless) automatically, but outside of the house, I can't get any wireless connection.
View 1 Replies
View Related
Jan 16, 2012
I have got a new laptop from work and I cannot get our home wireless to connect. It works on our phones and we can use our neighbours laptop with it but just not ours. It is showing that our wireless is an option but we cannot get onto the internet, page cannot be found/no connection messages come up!
View 2 Replies
View Related
Jun 9, 2011
I have a wireless router that was named and all the wireless equipment (laptop, ipod, phones) was connecting easily with no problems. Everything is saying "unable to connect". I have no clue what she did but she said her laptop asked her for the 8 number code from the router and she entered it.
View 1 Replies
View Related
Apr 29, 2011
Since successfully restoring my laptop to factory settings I have been unable to connect using my Intel PRO/Wireless 3945ABG Network Connection.Initially it worked, but after a while it stopped. I have completed several system restores, and the wireless connection works for a few days. On the last occasion (after installing windows updates) I received the dreaded blue screen and have been unable to connect.I am not sure if it is related to installing new windows updates as prior to restoring to factory settings I had no issues with my wireless connection.I am able to connect using the ethernet cable and I am currently able to connect using Pluscom wireless usb adapter.I am using the fujitsu siemens amilo pi 2515 notebook.netgear dg834g router?
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . :
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 19 Replies
View Related
