Way To Configure Router 2 To Work With Router 1
Jan 19, 2013
I got 2 routers for 2 houses which are basically neighbor close, Router 1 is the main Router which I pay for the internet, I transfer the internet from Router 1 to Router 2 with WDS Bridging which my Router is able to do so without any great effort (for me at least, I don't know about the router ). But sometimes I get the error:
"Default (adapter name) does not have valid IP configuration)"How can I configure Router 2 to work with Router 1 better (i.e renew IP etc....).
[code]...
View 4 Replies
ADVERTISEMENT
Sep 16, 2011
Right now I have it connected like this: Internet-> SURFboard SB6120 Modem -> DGL-4100 Router (modem in the WAN port, 3 internet connections plus the switch in the LAN ports) -> DGS-1008G Switch (2 other internet connections connected to this, as well as an Xbox 360).The problem is that everything connecting to the router works, and nothing works on the switch even though the power light is on (however, the port on the router that is receiving the switch is not lit up). I'm guessing this is because the router only assigns as many IP addresses as it has ports or something.
View 10 Replies
View Related
May 14, 2012
I have here a canyon wireless router. do you know where I can find online a tutorial or manual on how to configure a wireless router so that it acts as a repeater?
View 3 Replies
View Related
Oct 28, 2011
I purchases a Hauppage USB TV tuner and bought the software that allows live TV signals to be streamed to my home PC or android phone. Once I installed the software and ran a test, the remote access failed. The error message said I need to check the router's configuration. I know very little about configuring routers, but the model is WRT54Gv3.
View 1 Replies
View Related
Mar 17, 2012
Is there a way to configure one of the GigE ports on the E4200 to only work on the "guest" network? Basically I have a need to setup one of those ports to get to the Internet, but I don't want it to be able to get to anything else on the private side.
View 1 Replies
View Related
Feb 19, 2011
is it possible to configure a Cisco 878 Router to act as a device(router) between a DSL Modem and the LAN ?
There is the following scenarium: "Deutsche Telekom DSL Modem -> Cisco Router 878 -> LAN"
DSL is an SDSL Connection with a static IP address.
View 1 Replies
View Related
Dec 1, 2011
I just reset my router to the factory settings in order to make some changes to it. However, when I tried to change the SSID to a unique name, I was unable to connect my computer to the wireless network. I then reset my security settings and left the SSID to the default name "linksys_SES_54125" and it is working just fine. I tried to connect with two separate computers both running Windows 7. My router is the WRT54G v8
why I wouldn't be able to connect to my wireless network when I change the SSID?
View 5 Replies
View Related
Jun 17, 2012
how to configure dhcp relay agent and how it's work
View 1 Replies
View Related
Aug 9, 2012
when I try to configure my autonomous 1140, it does not work unless I use numbers.If I put in my phone number as my key, I can authenticate just fine. When I change it to some random letters and numbers.
View 6 Replies
View Related
Oct 10, 2011
is it possible to use cisco AnyConnect client to connect users with Cisco VPN 3000 appliance?If so how to configure VPN 3000 concentrator to work with AnyConnect?
View 1 Replies
View Related
Dec 28, 2012
Is it possible to configure a E2500 as router and WAP54G as a repeater? I used to have a WRT54GS as router but it has broken and now I bought a E2500 to replace it.
View 2 Replies
View Related
Jul 15, 2011
I have just changed my ISP and received a Thomson TG712 Modem, router and VoIP Gateway. Nice device, but I would like to extend my wi-fi network and connect a couple of PCs to another router in a different area using an almost new Linksys E4200 as a second router.I have already wired a network cable from the TG712 to the location where the E4200 is, tested the connection using a laptop, but cannot configure the E4200 to work receiving Internet service from the TG712.
View 2 Replies
View Related
Apr 21, 2007
I'm trying to configure my WAG200G to work in bridge mode so that it can transfer my external IP address to my ISA server.My network map is very simple,Internet -- WAG200G -- ISA Server -- LANCan
View 7 Replies
View Related
Jan 31, 2013
How to configure a 4500X with a GLC-T SFP so that it will work at 100M.The data sheets say it will work at 10/100/1000 but Im not seeing that happen can't set the speed and it doesn't negotiate with anything at 100M it will only work with auto to another switch set to auto and supports 1000M.
View 6 Replies
View Related
Sep 21, 2011
make a couple of SF300 switches to work properly with a C2960S-48TS-L that acts as core switch/basic router. I can't seem to figure out how to assign VLANs correctly in trunk and access mode on the SF300. The 2960S are a no brainer with IOS commands but the webgui in the SF300 is a pain.
I've configured the 2960S with 3 VLANs and I would like to have the SF300 switches connect to the C2960S-48TS-L through VLAN trunk and then configure the ports on the SF300 switches to belong to the assigned VLANs of my choosing. I would also like to have all the SF300 switches management interface in VLAN 50.
I've partially described the enviroment below.
VLANs
Data VLAN 10: 192.168.10.0
Management VLAN 50: 10.20.30.0
Voice VLAN 100: 10.10.10.0
[Code].....
View 5 Replies
View Related
Mar 5, 2012
I have a Cisco 2940 switch and a Cisco 1841 router. I want to build two different VLAN networks on the switch, which do not have to communicate one with each other, but those VLANS should communicate with the router.
I read a lot of articles, i tried to configure properly the switch and the router but i still don't get them work.
I set on the switch, the GigabitEthernet 0/1 port to Trunk port and i had to set it a native VLAN. The problem is that only from that native VLAN, i can ping the router.
View 17 Replies
View Related
Feb 27, 2012
My parents home has ADSL broadband through a Netgear router and connected to a desktop PC, they want to change the PC for a laptop for ease of access and to save space. Once the PC is disconnected will the broadband still be able to work. As the plan is for the router to be upstairs in the spare room and for them to use the laptop downstairs (wireless).
View 7 Replies
View Related
Mar 20, 2012
I cannot get my gateway router to work
View 1 Replies
View Related
Apr 2, 2011
what is the distance a router will work?
View 2 Replies
View Related
Feb 3, 2012
if i buy a adsl router can i run 2 xbox so my 2 sons can watch sky in there rooms ?
View 1 Replies
View Related
Oct 10, 2012
A switch and a router are both pretty straight forward in regards to how they work. Tho I have a problem with the router. I have 5 computers in my home and we have 5 different ips for the computers to use, these are handled by a switch. <Note: these are 5 *unique* ips that does NOT share bandwidth>
Recently I got a router and when I plugged it in it only gave us 1 ip to share amongst all 5 computers. This is a pretty big problem as we all of the sudden *share* the bandwidth. <Edit: the problem is that the router only gives us 1 of the 5 ips for the whole network to share>.What I wonder is what is it called when you get a router to accept multiple external ips and spread them out across the network, like a switch does? I assume this is a "special" feature on routers?
View 4 Replies
View Related
May 6, 2011
I want to be able to easily switch off the internet, but stay connected to my local network. I'm trying to set up an arrangement that allows computer 1 to disconnect from the Internet, but stay connected to the local network, so computer 2 can still access the printer that is slaved to computer 1, and let computer 2 connect to the internet anytime.If absolutely necessary, I have a second Router that might be employed, for switching purposes. The trick is to be able to do this switching simply. Can I issue a command from computer 1 that will let me disconnect from the internet, but stay on the local network?
View 3 Replies
View Related
Jan 23, 2013
i tried to plug my PC with an ether net cable directly to the modem (I turned off the router and only the 1 PC is plugged into the modem) and it does not work.
View 12 Replies
View Related
Jan 28, 2011
I have a Linksys Cisco system router and cannot get it to work, I believe I have it hooked up right. I am wanting it for a Sylvania wireless mobile internet device.
View 1 Replies
View Related
Mar 11, 2011
I have an extra router of that model because verizon sent me one to trouble shoot a problem I was having. It didnt solve the problem and they didnt request it back.So I wanted to give it to a friend to use on his AT&T dsl connection. He already has a modem going to the router. But it wont connect. Is there any reason this router wont work on another carriers network?
View 1 Replies
View Related
Jun 26, 2012
A day or so after that, it quit alltogether, with Windows saying it is a DNS server issue. I have reason to believe the IT guy for the apartment has NO idea what he's talking about, as he has told the landlord that it is probably too many wireless routers causing interference. This is not the case.Supposedly there are only about 4 apartments (out of 16) that are affected by this same problem, and I am the only person actively trying to fix this, as it is affecting my school work. I have limited access to the hardware of the building, but can get just about whatever I need for testing purposes through the landlord if I try hard enough.
View 8 Replies
View Related
Jul 12, 2011
tried 2 routers, one brand new , both DIR655 from Dlink - an older router. Just got a Comcast internet connection. The internet is fine when connected to the laptop directly. The router can talk to the computer. but plugging the internet cable into the router, the router never quite finds it, ie the blue indicator light never indicates access from modem to the router. So cant get that extra protection from the router, or the convenience of it.
By the way I am doing all of this hardwired even though the router is wireless capable. I did a hard reset which I could log on and see worked of the router. This happens when it is not hooked to the computer. I did the thing of powercycling modem and router, no change. Do I need a newer router? Is there something weird about Comcast, these were fine w Cablevision. Comcast tech support was useless.
View 9 Replies
View Related
Feb 6, 2013
Is this a wired or wireless connection issue?How to run and post an ipconfig /all output of the computer(s) in question for review.
Who is your Internet Service Provider (ISP)? India - BSNL
What type of Broadband connection are you using? ADSL
What is the exact Make and Model of your Modem, Router or Modem/Router Combo - Linksys, D-Link, Netgear, TP-LINK, etc. TeraCom Type 1
What is the Name of the Anti-Virus, Security or Firewall Software installed from the problematic computer - McAfee, Norton, Eset, Webroot, Zone Alarm, etc.Microsoft essentials.
Modem model Type 1 (TeraCom)
I also have CompUSA Wirelesss Broadband Router, which I am trying to use and make a wireless set up to connect the following devices
1. A Laptop with Windows Vista Home Premium SP2
2. A Laptop with Windows XP SP2
3. An Android 2.3 Mobile phone
I can directly connect the wire from modem to laptop and browse internet - it works. But that is not a wireless network. It proves that BSNL modem alone works.make this network Wireless by using the CompUSA wireless router.
1. The connection set up is as follows:
BSNL TeraCom Modem (LAN 1) ----- wired connection ----- COMPUSA Router (WAN)...... Wireless ....... laptop
2. I can connect to the wireless router by typing 192.168.2.1 in internet browser.Here are the details of wireless router settings
WAN>PPPoE
Use PPPoE Authentication
User Name : ************* (intentionally masking in this forum)
Password : ************* (intentionally masking in this forum)[code].....
View 7 Replies
View Related
Apr 22, 2011
I have asked this question to an internet service provider and 2 different techs at two differnt computer stores and no one has an answer for me. What is happening is just a few computers you plug them into dsl just through the modem the phone company uses and you cannont get on the internet, you get no internet connection, But you plug the same computer into a router that is connected even to the same modem to get the dsl and it will work right away. Now I understand that the router acts as a dhcp server and the computer is getting its ip address from it, but why won't it pick up one from the modem without the router? When this happens and it is not very often you can use the same modem with the same cabling and plug in another computer and it will get online right away so it is not the modem that is bad and not the cabling.
We had this problem about a year ago with like 5 computers. would not get on dsl, online through the telephone companies modem how ever you would use the same modem and plug it into a router and you could get online right away. At that time the telephone company had a real old DHCP server and the date and time and everything was wrong on it I suppose the battery was bad but they did away with it and use a differnt one going through Netins internet service provider. At that time before they did away with the dhcp server I had called netins and told them the problem they didn't no what was wrong and like I said I spoke with two other techs from two other computer stores and they had never heard of the problem, well now he is having the same problem with two laptops, I was just there today and saw they couldn't get online but you could plug another laptop into the same modem and it would get online with no problem, I took the laptop home and hooked it through my router and it got online right away. So I told him I tnought it was something with there dhcp server that the laptop wasn't getting an ip address from it but then why would another laptop getting plugged into the same modem in a few min get right online.
View 12 Replies
View Related
Jan 9, 2013
I have upgraded my MTN internet modum and now my netgear router MBRN3000 does not WORK I have forgot my username and password
View 1 Replies
View Related
Feb 16, 2012
just bought a new router netgear WNR200v3 and it wont, have tried to reset several times and still nothing.
View 1 Replies
View Related
Jul 4, 2012
I followed instructions on using 2 routers my master is a netgear wndr4000 and slave is a netgear wgt624 v3 i have dead spot in livingroom so i ran cat 5 cable to plug my smart tv in. I have old router so i was wondering if i could also have wifi in living room so i read thread and it works. Only one problem my router in living room is open and when i put a password on it, it wont let me login. How can i put a password on slave router?
View 11 Replies
View Related
Aug 21, 2011
I have two disk tops I want to network to the internet. Does any one know of a "Wired Router" that will work with Windows Seven and XP?
View 2 Replies
View Related
